Configure on demand delivery

Feature modules allow you to separate certain features and resources from the base module of your app and include them in your app bundle. Through Play Feature Delivery, users can, for example, later download and install those components on demand after they’ve already installed the base APK of your app.

For example, consider a text messaging app that includes functionality for capturing and sending picture messages, but only a small percentage of users send picture messages. It may make sense to include picture messaging as a downloadable feature module. That way, the initial app download is smaller for all users and only those users who send picture messages need to download that additional component.

Keep in mind, this type of modularization requires more effort and possibly refactoring your app’s existing code, so consider carefully which of your app’s features would benefit the most from being available to users on demand. To better understand optimal use cases and guidelines for on demand features, read UX best practices for on demand delivery.

If you want to gradually modularize app features over time, without enabling advanced delivery options, such as on demand deliver, instead configure install-time delivery.

This page helps you add a feature module to your app project and configure it for on demand delivery. Before you begin, make sure you're using Android Studio 3.5 or higher and Android Gradle Plugin 3.5.0 or higher.

Configure a new module for on demand delivery

The easiest way to create a new feature module is by using Android Studio 3.5 or higher. Because feature modules have an inherent dependency on the base app module, you can add them only to existing app projects.

To add a feature module to your app project using Android Studio, proceed as follows:

1. If you haven’t already done so, open your app project in the IDE.
2. Select File > New > New Module from the menu bar.
3. In the Create New Module dialog, select Dynamic Feature Module and click Next.
4. In the Configure your new module section, complete the following:
   1. Select the Base application module for your app project from the dropdown menu.
   2. Specify a Module name. The IDE uses this name to identify the module as a Gradle subproject in your Gradle settings file. When you build your app bundle, Gradle uses the last element of the subproject name to inject the <manifest split> attribute in the feature module’s manifest.
   3. Specify the module’s package name. By default, Android Studio suggests a package name that combines the root package name of the base module and the module name you specified in the previous step.
   4. Select the Minimum API level you want the module to support. This value should match that of the base module.
5. Click Next.

6. In the Module Download Options section, complete the following:

   1. Specify the Module title using up to 50 characters. The platform uses this title to identify the module to users when, for example, confirming whether the user wants to download the module. For this reason, your app’s base module must include the module title as a string resource, which you can translate. When creating the module using Android Studio, the IDE adds the string resource to the base module for you and injects the following entry in the feature module’s manifest:

      <dist:module
          ...
          dist:title="@string/feature_title">
      </dist:module>
      

   2. In the dropdown menu under Install-time inclusion, select Do not include module at install-time. Android Studio injects the following in the module’s manifest to reflect your choice:

      <dist:module ... >
        <dist:delivery>
            <dist:on-demand/>
        </dist:delivery>
      </dist:module>
      

   3. Check the box next to Fusing if you want this module to be available to devices running Android 4.4 (API level 20) and lower and included in multi-APKs. This means you can enable on demand behavior for this module and disable fusing to omit it from devices that don’t support downloading and installing split APKs. Android Studio injects the following in the module’s manifest to reflect your choice:

      <dist:module ...>
          <dist:fusing dist:include="true | false" />
      </dist:module>
      

7. Click Finish.

After Android Studio finishes creating your module, inspect its contents yourself from the Project pane (select View > Tool Windows > Project from the menu bar). The default code, resources, and organization should be similar to those of the standard app module.

Next, you will need to implement the on demand install functionality using the Play Feature Delivery library.

Include the Play Feature Delivery Library in your project

Before you can start, you need to first add the Play Feature Delivery Library to your project.

Request an on demand module

When your app needs to use a feature module, it can request one while it's in the foreground through the SplitInstallManager class. When making a request, your app needs to specify the name of the module as defined by the split element in the target module’s manifest. When you create a feature module using Android Studio, the build system uses the Module name you provide to inject this property into the module's manifest at compile time. For more information, read about the feature module manifests.

For example, consider an app that has an on demand module to capture and send picture messages using the device’s camera, and this on demand module specifies split="pictureMessages" in its manifest. The following sample uses SplitInstallManager to request the pictureMessages module (along with an additional module for some promotional filters):

// Creates an instance of SplitInstallManager.
val splitInstallManager = SplitInstallManagerFactory.create(context)

// Creates a request to install a module.
val request =
    SplitInstallRequest
        .newBuilder()
        // You can download multiple on demand modules per
        // request by invoking the following method for each
        // module you want to install.
        .addModule("pictureMessages")
        .addModule("promotionalFilters")
        .build()

splitInstallManager
    // Submits the request to install the module through the
    // asynchronous startInstall() task. Your app needs to be
    // in the foreground to submit the request.
    .startInstall(request)
    // You should also be able to gracefully handle
    // request state changes and errors. To learn more, go to
    // the section about how to Monitor the request state.
    .addOnSuccessListener { sessionId -> ... }
    .addOnFailureListener { exception ->  ... }

// Creates an instance of SplitInstallManager.
SplitInstallManager splitInstallManager =
    SplitInstallManagerFactory.create(context);

// Creates a request to install a module.
SplitInstallRequest request =
    SplitInstallRequest
        .newBuilder()
        // You can download multiple on demand modules per
        // request by invoking the following method for each
        // module you want to install.
        .addModule("pictureMessages")
        .addModule("promotionalFilters")
        .build();

splitInstallManager
    // Submits the request to install the module through the
    // asynchronous startInstall() task. Your app needs to be
    // in the foreground to submit the request.
    .startInstall(request)
    // You should also be able to gracefully handle
    // request state changes and errors. To learn more, go to
    // the section about how to Monitor the request state.
    .addOnSuccessListener(sessionId -> { ... })
    .addOnFailureListener(exception -> { ... });

When your app requests an on demand module, the Play Feature Delivery Library employs a “fire-and-forget” strategy. That is, it sends the request to download the module to the platform, but it does not monitor whether the installation succeeded. To move the user journey forward after installation or gracefully handle errors, make sure you monitor the request state.

Note: It's okay to request a feature module that’s already installed on the device. The API instantly considers the request as completed if it detects the module is already installed. Additionally, after a module is installed, Google Play keeps it updated automatically. That is, when you upload a new version of your app bundle, the platform updates all installed APKs that belong to your app. For more information, read Manage app updates.

To have access to the module's code and resources, your app needs to enable SplitCompat. Note that SplitCompat is not required for Android Instant Apps.

Defer installation of on demand modules

If you do not need your app to immediately download and install an on demand module, you can defer installation for when the app is in the background. For example, if you want to preload some promotional material for a later launch of your app.

You can specify a module to be download later using the deferredInstall() method, as shown below. And, unlike SplitInstallManager.startInstall(), your app does not need to be in the foreground to initiate a request for a deferred installation.

// Requests an on demand module to be downloaded when the app enters
// the background. You can specify more than one module at a time.
splitInstallManager.deferredInstall(listOf("promotionalFilters"))

// Requests an on demand module to be downloaded when the app enters
// the background. You can specify more than one module at a time.
splitInstallManager.deferredInstall(Arrays.asList("promotionalFilters"));

Requests for deferred installs are best-effort and you cannot track their progress. So, before trying to access a module you have specified for deferred installation, you should check that the module has been installed. If you need the module to be available immediately, instead use SplitInstallManager.startInstall() to request it, as shown in the previous section.

Monitor the request state

To be able to update a progress bar, fire an intent after installation, or gracefully handle a request error, you need to listen for state updates from the asynchronous SplitInstallManager.startInstall() task. Before you can start receiving updates for your install request, register a listener and get the session ID for the request, as shown below.

// Initializes a variable to later track the session ID for a given request.
var mySessionId = 0

// Creates a listener for request status updates.
val listener = SplitInstallStateUpdatedListener { state ->
    if (state.sessionId() == mySessionId) {
      // Read the status of the request to handle the state update.
    }
}

// Registers the listener.
splitInstallManager.registerListener(listener)

...

splitInstallManager
    .startInstall(request)
    // When the platform accepts your request to download
    // an on demand module, it binds it to the following session ID.
    // You use this ID to track further status updates for the request.
    .addOnSuccessListener { sessionId -> mySessionId = sessionId }
    // You should also add the following listener to handle any errors
    // processing the request.
    .addOnFailureListener { exception ->
        // Handle request errors.
    }

// When your app no longer requires further updates, unregister the listener.
splitInstallManager.unregisterListener(listener)

// Initializes a variable to later track the session ID for a given request.
int mySessionId = 0;

// Creates a listener for request status updates.
SplitInstallStateUpdatedListener listener = state -> {
    if (state.sessionId() == mySessionId) {
      // Read the status of the request to handle the state update.
    }
};

// Registers the listener.
splitInstallManager.registerListener(listener);

...

splitInstallManager
    .startInstall(request)
    // When the platform accepts your request to download
    // an on demand module, it binds it to the following session ID.
    // You use this ID to track further status updates for the request.
    .addOnSuccessListener(sessionId -> { mySessionId = sessionId; })
    // You should also add the following listener to handle any errors
    // processing the request.
    .addOnFailureListener(exception -> {
        // Handle request errors.
    });

// When your app no longer requires further updates, unregister the listener.
splitInstallManager.unregisterListener(listener);

Handle request errors

Keep in mind that on demand installation of feature modules can sometime fail, just like app installation doesn't always succeed. Failure to install can be due to issues like low device storage, no network connectivity, or the user not being signed in to the Google Play Store. For suggestions on how to handle these situations gracefully from the user's perspective, check out our UX guidelines for on demand delivery.

Code-wise, you should handle failures downloading or installing a module using addOnFailureListener(), as shown below:

splitInstallManager
    .startInstall(request)
    .addOnFailureListener { exception ->
        when ((exception as SplitInstallException).errorCode) {
            SplitInstallErrorCode.NETWORK_ERROR -> {
                // Display a message that requests the user to establish a
                // network connection.
            }
            SplitInstallErrorCode.ACTIVE_SESSIONS_LIMIT_EXCEEDED -> checkForActiveDownloads()
            ...
        }
    }

fun checkForActiveDownloads() {
    splitInstallManager
        // Returns a SplitInstallSessionState object for each active session as a List.
        .sessionStates
        .addOnCompleteListener { task ->
            if (task.isSuccessful) {
                // Check for active sessions.
                for (state in task.result) {
                    if (state.status() == SplitInstallSessionStatus.DOWNLOADING) {
                        // Cancel the request, or request a deferred installation.
                    }
                }
            }
        }
}

splitInstallManager
    .startInstall(request)
    .addOnFailureListener(exception -> {
        switch (((SplitInstallException) exception).getErrorCode()) {
            case SplitInstallErrorCode.NETWORK_ERROR:
                // Display a message that requests the user to establish a
                // network connection.
                break;
            case SplitInstallErrorCode.ACTIVE_SESSIONS_LIMIT_EXCEEDED:
                checkForActiveDownloads();
            ...
    });

void checkForActiveDownloads() {
    splitInstallManager
        // Returns a SplitInstallSessionState object for each active session as a List.
        .getSessionStates()
        .addOnCompleteListener( task -> {
            if (task.isSuccessful()) {
                // Check for active sessions.
                for (SplitInstallSessionState state : task.getResult()) {
                    if (state.status() == SplitInstallSessionStatus.DOWNLOADING) {
                        // Cancel the request, or request a deferred installation.
                    }
                }
            }
        });
}

The table below describes the error states your app may need to handle:

If a user requests downloading an on demand module and an error occurs, consider displaying a dialog that provides two options for the user: Try again (which attempts the request again) and Cancel (which abandons the request). For additional support, you should also provide Help link that directs users to the Google Play Help center.

Handle state updates

After you register a listener and record the session ID for your request, use StateUpdatedListener.onStateUpdate() to handle state changes, as shown below.

override fun onStateUpdate(state : SplitInstallSessionState) {
    if (state.status() == SplitInstallSessionStatus.FAILED
        && state.errorCode() == SplitInstallErrorCode.SERVICE_DIED) {
       // Retry the request.
       return
    }
    if (state.sessionId() == mySessionId) {
        when (state.status()) {
            SplitInstallSessionStatus.DOWNLOADING -> {
              val totalBytes = state.totalBytesToDownload()
              val progress = state.bytesDownloaded()
              // Update progress bar.
            }
            SplitInstallSessionStatus.INSTALLED -> {

              // After a module is installed, you can start accessing its content or
              // fire an intent to start an activity in the installed module.
              // For other use cases, see access code and resources from installed modules.

              // If the request is an on demand module for an Android Instant App
              // running on Android 8.0 (API level 26) or higher, you need to
              // update the app context using the SplitInstallHelper API.
            }
        }
    }
}

@Override
public void onStateUpdate(SplitInstallSessionState state) {
    if (state.status() == SplitInstallSessionStatus.FAILED
        && state.errorCode() == SplitInstallErrorCode.SERVICE_DIES) {
       // Retry the request.
       return;
    }
    if (state.sessionId() == mySessionId) {
        switch (state.status()) {
            case SplitInstallSessionStatus.DOWNLOADING:
              int totalBytes = state.totalBytesToDownload();
              int progress = state.bytesDownloaded();
              // Update progress bar.
              break;

            case SplitInstallSessionStatus.INSTALLED:

              // After a module is installed, you can start accessing its content or
              // fire an intent to start an activity in the installed module.
              // For other use cases, see access code and resources from installed modules.

              // If the request is an on demand module for an Android Instant App
              // running on Android 8.0 (API level 26) or higher, you need to
              // update the app context using the SplitInstallHelper API.
        }
    }
}

The possible states for your install request are described in the table below.

Obtain user confirmation

In some cases, Google Play may require user confirmation before satisfying a download request. For example, if your app has not been installed by Google Play or if you are attempting a large download over mobile data. In such cases, the status for the request reports REQUIRES_USER_CONFIRMATION, and your app needs to obtain user confirmation before the device is able to download and install the modules in the request. To obtain confirmation, your app should prompt the user as follows:

override fun onSessionStateUpdate(state: SplitInstallSessionState) {
    if (state.status() == SplitInstallSessionStatus.REQUIRES_USER_CONFIRMATION) {
        // Displays a confirmation for the user to confirm the request.
        splitInstallManager.startConfirmationDialogForResult(
          state,
          // an activity result launcher registered via registerForActivityResult
          activityResultLauncher)
    }
    ...
 }

@Override void onSessionStateUpdate(SplitInstallSessionState state) {
    if (state.status() == SplitInstallSessionStatus.REQUIRES_USER_CONFIRMATION) {
        // Displays a confirmation for the user to confirm the request.
        splitInstallManager.startConfirmationDialogForResult(
          state,
          // an activity result launcher registered via registerForActivityResult
          activityResultLauncher);
    }
    ...
 }

You can register an activity result launcher using the builtin ActivityResultContracts.StartIntentSenderForResult contract. See Activity Result APIs.

The status for the request is updated depending on the user response:

• If the user accepts the confirmation, the request status changes to PENDING and the download proceeds.
• If the user denies the confirmation, the request status changes to CANCELED.
• If the user does not make a selection before the dialog is destroyed, the request status remains as REQUIRES_USER_CONFIRMATION. Your app can prompt the user again to complete the request.

To receive a callback with the user's response, you can override the ActivityResultCallback as shown below.

registerForActivityResult(StartIntentSenderForResult()) { result: ActivityResult -> {
        // Handle the user's decision. For example, if the user selects "Cancel",
        // you may want to disable certain functionality that depends on the module.
    }
}

registerForActivityResult(
    new ActivityResultContracts.StartIntentSenderForResult(),
    new ActivityResultCallback<ActivityResult>() {
        @Override
        public void onActivityResult(ActivityResult result) {
            // Handle the user's decision. For example, if the user selects "Cancel",
            // you may want to disable certain functionality that depends on the module.
        }
    });

Cancel an install request

If your app needs to cancel a request before it is installed, it can invoke the cancelInstall() method using the request’s session ID, as shown below.

splitInstallManager
    // Cancels the request for the given session ID.
    .cancelInstall(mySessionId)

splitInstallManager
    // Cancels the request for the given session ID.
    .cancelInstall(mySessionId);

Access modules

To access code and resources from a downloaded module after it is downloaded, your app needs to enable the SplitCompat Library for both your app and each activity in the feature modules your app downloads.

You should note, however, the platform experiences the following restrictions to accessing contents of a module, for some time (days, in some cases) after downloading the module:

• The platform can not apply any new manifest entries introduced by the module.
• The platform can not access the module’s resources for system UI components, such as notifications. If you need to use such resources immediately, consider including those resource in the base module of your app.

Enable SplitCompat

For your app to access code and resources from a downloaded module, you need to enable SplitCompat using only one of the methods described in the following sections.

After you enable SplitCompat for your app, you need to also enable SplitCompat for each activity in the feature modules you want your app to have access to.

Declare SplitCompatApplication in the manifest

The simplest way to enable SplitCompat is to declare SplitCompatApplication as the Application subclass in your app’s manifest, as shown below:

<application
    ...
    android:name="com.google.android.play.core.splitcompat.SplitCompatApplication">
</application>

After the app is installed on a device, you can access code and resources from downloaded feature modules automatically.

Invoke SplitCompat at runtime

You can also enable SplitCompat in specific activities or services at runtime. Enabling SplitCompat this way is required to launch activities included in feature modules. To do this, override attachBaseContext as seen below.

If you have a custom Application class, have it instead extend SplitCompatApplication in order to enable SplitCompat for your app, as shown below:

class MyApplication : SplitCompatApplication() {
    ...
}

public class MyApplication extends SplitCompatApplication {
    ...
}

SplitCompatApplication simply overrides ContextWrapper.attachBaseContext() to include SplitCompat.install(Context applicationContext). If you don’t want your Application class to extend SplitCompatApplication, you can override the attachBaseContext() method manually, as follows:

override fun attachBaseContext(base: Context) {
    super.attachBaseContext(base)
    // Emulates installation of future on demand modules using SplitCompat.
    SplitCompat.install(this)
}

@Override
protected void attachBaseContext(Context base) {
    super.attachBaseContext(base);
    // Emulates installation of future on demand modules using SplitCompat.
    SplitCompat.install(this);
}

If your on demand module is compatible with both instant apps and installed apps, you can invoke SplitCompat conditionally, as follows:

override fun attachBaseContext(base: Context) {
    super.attachBaseContext(base)
    if (!InstantApps.isInstantApp(this)) {
        SplitCompat.install(this)
    }
}

@Override
protected void attachBaseContext(Context base) {
    super.attachBaseContext(base);
    if (!InstantApps.isInstantApp(this)) {
        SplitCompat.install(this);
    }
}

Enable SplitCompat for module activities

After you enable SplitCompat for your base app, you need to enable SplitCompat for each activity that your app downloads in a feature module. To do so, use the SplitCompat.installActivity() method, as follows:

override fun attachBaseContext(base: Context) {
    super.attachBaseContext(base)
    // Emulates installation of on demand modules using SplitCompat.
    SplitCompat.installActivity(this)
}

@Override
protected void attachBaseContext(Context base) {
    super.attachBaseContext(base);
    // Emulates installation of on demand modules using SplitCompat.
    SplitCompat.installActivity(this);
}

Access components defined in feature modules

Start an activity defined in a feature module

You can launch activities defined in feature modules using startActivity() after enabling SplitCompat.

startActivity(Intent()
  .setClassName("com.package", "com.package.module.MyActivity")
  .setFlags(...))

startActivity(new Intent()
  .setClassName("com.package", "com.package.module.MyActivity")
  .setFlags(...));

The first parameter to setClassName is the package name of the app and the second parameter is the full class name of the activity.

When you have an activity in a feature module you downloaded on-demand, you must enable SplitCompat in the activity.

Start a service defined in a feature module

You can launch services defined in feature modules using startService() after enabling SplitCompat.

startService(Intent()
  .setClassName("com.package", "com.package.module.MyService")
  .setFlags(...))

startService(new Intent()
  .setClassName("com.package", "com.package.module.MyService")
  .setFlags(...));

Export a component defined in a feature module

You should not include exported Android components inside optional modules.

The build system merges manifest entries for all modules into the base module; if an optional module contained an exported component, it would be accessible even before the module is installed and can cause a crash due to missing code when invoked from another app.

This is not a problem for internal components; they are accessed only by the app, so the app can check that the module is installed before accessing the component.

If you need an exported component, and you want its content to be in an optional module, consider implementing a proxy pattern. You can do that by adding a proxy exported component in the base; when accessed, the proxy component can check for the presence of the module that contains the content. If the module is present, the proxy component can start the internal component from the module via an Intent, relaying the intent from the caller app. If the module is not present, the component can download the module or return an appropriate error message to the caller app.

Access code and resources from installed modules

If you enable SplitCompat for your base application context and the activities in your feature module, you can use the code and resources from a feature module as if it were a part of the base APK, once the optional module is installed.

Access code from a different module

Access base code from a module

Code that is inside your base module can be used directly by other modules. You don't need to do anything special; just import and use the classes you need.

Access module code from another module

An object or class inside a module cannot be statically accessed from another module directly, but it can be accessed indirectly, using reflection.

You should be wary of how often this happens, due to the performance costs of reflection. For complex use cases, use dependency injection frameworks like Dagger 2 to guarantee a single reflection call per application lifetime.

To simplify the interactions with the object after instantiation, it is recommended to define an interface in the base module and its implementation in the feature module. For instance:

// In the base module
interface MyInterface {
  fun hello(): String
}

// In the feature module
object MyInterfaceImpl : MyInterface {
  override fun hello() = "Hello"
}

// In the base module, where we want to access the feature module code
val stringFromModule = (Class.forName("com.package.module.MyInterfaceImpl")
    .kotlin.objectInstance as MyInterface).hello();

// In the base module
public interface MyInterface {
  String hello();
}

// In the feature module
public class MyInterfaceImpl implements MyInterface {
  @Override
  public String hello() {
    return "Hello";
  }
}

// In the base module, where we want to access the feature module code
String stringFromModule =
   ((MyInterface) Class.forName("com.package.module.MyInterfaceImpl").getConstructor().newInstance()).hello();

Access resources and assets from a different module

Once a module is installed, you can access resources and assets within the module in the standard way, with two caveats:

• If you are accessing a resource from a different module, the module will not have access to the resource identifier, though the resource can still be accessed by name. Note that the package to use to reference the resource is the package of the module where the resource is defined.
• If you want to access assets or resources that exist in a newly installed module from a different installed module of your app, you must do so using the application context. The context of the component that's trying to access the resources will not yet be updated. Alternatively, you can recreate that component (for instance calling Activity.recreate()) or reinstall SplitCompat on it after the feature module installation.

Load native code in an app using on-demand delivery

We recommend using ReLinker to load all your native libraries when using on-demand delivery of feature modules. ReLinker fixes an issue in loading native libraries after the installation of a feature module. You can learn more about ReLinker in the Android JNI Tips.

Load native code from an optional module

Once a split is installed, we recommend loading its native code through ReLinker. For instant apps you should use this special method.

If you are using System.loadLibrary() to load your native code and your native library has a dependency on another library in the module, you must manually load that other library first. If you are using ReLinker, the equivalent operation is Relinker.recursively().loadLibrary().

If you are using dlopen() in native code to load a library defined in an optional module, it will not work with relative library paths. The best solution is to retrieve the absolute path of the library from Java code via ClassLoader.findLibrary() and then use it in your dlopen() call. Do this before entering the native code or use a JNI call from your native code into Java.

Access installed Android Instant Apps

After an Android Instant App module reports as INSTALLED, you can access its code and resources using a refreshed app Context. A context that your app creates before installing a module (for example, one that's already stored in a variable) does not contain the content of the new module. But a fresh context does—this can be obtained, for example, using createPackageContext.

// Generate a new context as soon as a request for a new module
// reports as INSTALLED.
override fun onStateUpdate(state: SplitInstallSessionState ) {
    if (state.sessionId() == mySessionId) {
        when (state.status()) {
            ...
            SplitInstallSessionStatus.INSTALLED -> {
                val newContext = context.createPackageContext(context.packageName, 0)
                // If you use AssetManager to access your app’s raw asset files, you’ll need
                // to generate a new AssetManager instance from the updated context.
                val am = newContext.assets
            }
        }
    }
}

// Generate a new context as soon as a request for a new module
// reports as INSTALLED.
@Override
public void onStateUpdate(SplitInstallSessionState state) {
    if (state.sessionId() == mySessionId) {
        switch (state.status()) {
            ...
            case SplitInstallSessionStatus.INSTALLED:
                Context newContext = context.createPackageContext(context.getPackageName(), 0);
                // If you use AssetManager to access your app’s raw asset files, you’ll need
                // to generate a new AssetManager instance from the updated context.
                AssetManager am = newContext.getAssets();
        }
    }
}

Android Instant Apps on Android 8.0 and higher

When requesting an on demand module for an Android Instant App on Android 8.0 (API level 26) and higher, after an install request reports as INSTALLED, you need to update the app with the context of the new module through a call to SplitInstallHelper.updateAppInfo(Context context). Otherwise, the app is not yet aware of the module’s code and resources. After updating the app’s metadata, you should load the module’s contents during the next main thread event by invoking a new Handler, as shown below:

override fun onStateUpdate(state: SplitInstallSessionState ) {
    if (state.sessionId() == mySessionId) {
        when (state.status()) {
            ...
            SplitInstallSessionStatus.INSTALLED -> {
                // You need to perform the following only for Android Instant Apps
                // running on Android 8.0 (API level 26) and higher.
                if (BuildCompat.isAtLeastO()) {
                    // Updates the app’s context with the code and resources of the
                    // installed module.
                    SplitInstallHelper.updateAppInfo(context)
                    Handler().post {
                        // Loads contents from the module using AssetManager
                        val am = context.assets
                        ...
                    }
                }
            }
        }
    }
}

@Override
public void onStateUpdate(SplitInstallSessionState state) {
    if (state.sessionId() == mySessionId) {
        switch (state.status()) {
            ...
            case SplitInstallSessionStatus.INSTALLED:
            // You need to perform the following only for Android Instant Apps
            // running on Android 8.0 (API level 26) and higher.
            if (BuildCompat.isAtLeastO()) {
                // Updates the app’s context with the code and resources of the
                // installed module.
                SplitInstallHelper.updateAppInfo(context);
                new Handler().post(new Runnable() {
                    @Override public void run() {
                        // Loads contents from the module using AssetManager
                        AssetManager am = context.getAssets();
                        ...
                    }
                });
            }
        }
    }
}

Load C/C++ libraries

If you want to load C/C++ libraries from a module that the device has already downloaded in an Instant App, use SplitInstallHelper.loadLibrary(Context context, String libName), as shown below:

override fun onStateUpdate(state: SplitInstallSessionState) {
    if (state.sessionId() == mySessionId) {
        when (state.status()) {
            SplitInstallSessionStatus.INSTALLED -> {
                // Updates the app’s context as soon as a module is installed.
                val newContext = context.createPackageContext(context.packageName, 0)
                // To load C/C++ libraries from an installed module, use the following API
                // instead of System.load().
                SplitInstallHelper.loadLibrary(newContext, “my-cpp-lib”)
                ...
            }
        }
    }
}

public void onStateUpdate(SplitInstallSessionState state) {
    if (state.sessionId() == mySessionId) {
        switch (state.status()) {
            case SplitInstallSessionStatus.INSTALLED:
                // Updates the app’s context as soon as a module is installed.
                Context newContext = context.createPackageContext(context.getPackageName(), 0);
                // To load C/C++ libraries from an installed module, use the following API
                // instead of System.load().
                SplitInstallHelper.loadLibrary(newContext, “my-cpp-lib”);
                ...
        }
    }
}

Known limitations

• It isn't possible to use Android WebView in an activity that accesses resources or assets from an optional module. This is due to an incompatibility between WebView and SplitCompat on Android API level 28 and lower.
• You can't cache Android ApplicationInfo objects, their contents, or objects that contain them within your app. You should always fetch these objects as needed from an app context. Caching such objects could cause the app to crash when installing a feature module.

Manage installed modules

To check which feature modules are currently installed on the device, you can call SplitInstallManager.getInstalledModules(), which returns a Set<String> of the names of the installed modules, as shown below.

val installedModules: Set<String> = splitInstallManager.installedModules

Set<String> installedModules = splitInstallManager.getInstalledModules();

Uninstall modules

You can request the device to uninstall modules by invoking SplitInstallManager.deferredUninstall(List<String> moduleNames), as shown below.

// Specifies two feature modules for deferred uninstall.
splitInstallManager.deferredUninstall(listOf("pictureMessages", "promotionalFilters"))

// Specifies two feature modules for deferred uninstall.
splitInstallManager.deferredUninstall(Arrays.asList("pictureMessages", "promotionalFilters"));

Module uninstalls do not occur immediately. That is, the device uninstalls them in the background as needed to save storage space. You can confirm that the device has deleted a module by invoking SplitInstallManager.getInstalledModules() and inspecting the result, as described in the previous section.

Download additional language resources

With app bundles, devices download only the code and resources they require to run your app. So, for language resources, a user’s device downloads only your app’s language resources that match the one or more languages currently selected in the device’s settings.

If you want your app to have access to additional language resources—for example, to implement an in-app language picker, you can use the Play Feature Delivery Library to download them on demand. The process is similar to that of downloading a feature module, as shown below.

// Captures the user’s preferred language and persists it
// through the app’s SharedPreferences.
sharedPrefs.edit().putString(LANGUAGE_SELECTION, "fr").apply()
...

// Creates a request to download and install additional language resources.
val request = SplitInstallRequest.newBuilder()
        // Uses the addLanguage() method to include French language resources in the request.
        // Note that country codes are ignored. That is, if your app
        // includes resources for “fr-FR” and “fr-CA”, resources for both
        // country codes are downloaded when requesting resources for "fr".
        .addLanguage(Locale.forLanguageTag(sharedPrefs.getString(LANGUAGE_SELECTION)))
        .build()

// Submits the request to install the additional language resources.
splitInstallManager.startInstall(request)

// Captures the user’s preferred language and persists it
// through the app’s SharedPreferences.
sharedPrefs.edit().putString(LANGUAGE_SELECTION, "fr").apply();
...

// Creates a request to download and install additional language resources.
SplitInstallRequest request =
    SplitInstallRequest.newBuilder()
        // Uses the addLanguage() method to include French language resources in the request.
        // Note that country codes are ignored. That is, if your app
        // includes resources for “fr-FR” and “fr-CA”, resources for both
        // country codes are downloaded when requesting resources for "fr".
        .addLanguage(Locale.forLanguageTag(sharedPrefs.getString(LANGUAGE_SELECTION)))
        .build();

// Submits the request to install the additional language resources.
splitInstallManager.startInstall(request);

The request is handled as if it were a request for a feature module. That is, you can monitor the request state like you normally would.

If your app doesn't require the additional language resources immediately, you can defer the installation for when the app is in the background, as shown below.

splitInstallManager.deferredLanguageInstall(
    Locale.forLanguageTag(sharedPrefs.getString(LANGUAGE_SELECTION)))

splitInstallManager.deferredLanguageInstall(
    Locale.forLanguageTag(sharedPrefs.getString(LANGUAGE_SELECTION)));

Access downloaded language resources

To gain access to downloaded language resources, your app needs to run the SplitCompat.installActivity() method within the attachBaseContext() method of each activity that requires access to those resources, as shown below.

override fun attachBaseContext(base: Context) {
  super.attachBaseContext(base)
  SplitCompat.installActivity(this)
}

@Override
protected void attachBaseContext(Context base) {
  super.attachBaseContext(base);
  SplitCompat.installActivity(this);
}

For each activity you want to use language resources your app has downloaded, update the base context and set a new locale through its Configuration:

override fun attachBaseContext(base: Context) {
  val configuration = Configuration()
  configuration.setLocale(Locale.forLanguageTag(sharedPrefs.getString(LANGUAGE_SELECTION)))
  val context = base.createConfigurationContext(configuration)
  super.attachBaseContext(context)
  SplitCompat.install(this)
}

@Override
protected void attachBaseContext(Context base) {
  Configuration configuration = new Configuration();
  configuration.setLocale(Locale.forLanguageTag(sharedPrefs.getString(LANGUAGE_SELECTION)));
  Context context = base.createConfigurationContext(configuration);
  super.attachBaseContext(context);
  SplitCompat.install(this);
}

In order for these changes to take effect, you have to recreate your activity after the new language is installed and ready to use. You can use the Activity#recreate() method.

when (state.status()) {
  SplitInstallSessionStatus.INSTALLED -> {
      // Recreates the activity to load resources for the new language
      // preference.
      activity.recreate()
  }
  ...
}

switch (state.status()) {
  case SplitInstallSessionStatus.INSTALLED:
      // Recreates the activity to load resources for the new language
      // preference.
      activity.recreate();
  ...
}

Uninstall additional language resources

Similar to feature modules, you can uninstall additional resources at any time. Before requesting an uninstall, you may want to first determine which languages are currently installed, as follows.

val installedLanguages: Set<String> = splitInstallManager.installedLanguages

Set<String> installedLanguages = splitInstallManager.getInstalledLanguages();

You can then decide which languages to uninstall using the deferredLanguageUninstall() method, as shown below.

splitInstallManager.deferredLanguageUninstall(
    Locale.forLanguageTag(sharedPrefs.getString(LANGUAGE_SELECTION)))

splitInstallManager.deferredLanguageUninstall(
    Locale.forLanguageTag(sharedPrefs.getString(LANGUAGE_SELECTION)));

Locally test module installs

The Play Feature Delivery Library allows you to locally test your app’s ability to do the following, without connecting to the Play Store:

• Request and monitor module installs.
• Handle install errors.
• Use SplitCompat to access modules.

This page describes how to deploy your app's split APKs to your test device so that Play Feature Delivery automatically uses those APKs to simulate requesting, downloading, and installing modules from the Play Store.

Although you don't need to make any changes to your app's logic, you need to meet the following requirements:

• Download and install the latest version of bundletool. You need bundletool to build a new set of installable APKs from your app's bundle.

Build a set of APKs

If you haven't already done so, build your app’s split APKs, as follows:

1. Build an app bundle for your app using one of the following methods:
   • Use Android Studio and the Android plugin for Gradle to build and sign an Android App Bundle.
   • Build your app bundle from the command line.

2. Use bundletool to generate a set of APKs for all device configurations with the following command:

   bundletool build-apks --local-testing
     --bundle my_app.aab
     --output my_app.apks
   

The --local-testing flag includes meta-data in your APKs' manifests that lets the Play Feature Delivery Library know to use the local split APKs to test installing feature modules, without connecting to the Play Store.

Deploy your app to the device

After you build a set of APKs using the --local-testing flag, use bundletool to install the base version of your app and transfer additional APKs to your device's local storage. You can perform both actions with the following command:

bundletool install-apks --apks my_app.apks

Now, when you start your app and complete the user flow to download and install a feature module, the Play Feature Delivery Library uses the APKs that bundletool transferred to the device's local storage.

Simulate a network error

To simulate module installs from the Play Store, the Play Feature Delivery Library uses an alternative to the SplitInstallManager, called FakeSplitInstallManager, to request the module. When you use bundletool with the --local-testing flag to build a set of APKs and deploy them to your test device, it includes metadata that instructs the Play Feature Delivery Library to automatically switch your app's API calls to invoke FakeSplitInstallManager, instead of SplitInstallManager.

FakeSplitInstallManager includes a boolean flag that you can enable to simulate a network error the next time your app requests to install a module. To access FakeSplitInstallManager in your tests, you can get an instance of it using the FakeSplitInstallManagerFactory, as shown below:

// Creates an instance of FakeSplitInstallManager with the app's context.
val fakeSplitInstallManager = FakeSplitInstallManagerFactory.create(context)
// Tells Play Feature Delivery Library to force the next module request to
// result in a network error.
fakeSplitInstallManager.setShouldNetworkError(true)

// Creates an instance of FakeSplitInstallManager with the app's context.
FakeSplitInstallManager fakeSplitInstallManager =
    FakeSplitInstallManagerFactory.create(context);
// Tells Play Feature Delivery Library to force the next module request to
// result in a network error.
fakeSplitInstallManager.setShouldNetworkError(true);