[go: up one dir, main page]
IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v163y2015icp48-60.html
   My bibliography  Save this article

Acquisition pricing and remanufacturing decisions in a closed-loop supply chain

Author

Listed:
  • He, Yuanjie
Abstract
This paper models a closed-loop supply chain (CLSC) with a manufacturer and its supply channels – recycle channel and reliable supply channel. We assume that the manufacturer may reuse the recycled main product component and remanufacture the product. The recycle channel shows stochastic recovery rate. Both the centralized (integrated) recycle channel CLSC and the decentralized recycle channel CLSC are studied. The optimal production decision and the optimal acquisition pricing decision are obtained for both the deterministic demand and the stochastic demand cases. Further, the paper discusses the supply chain inefficiency in this CLSC. It is shown that under decentralized recycle channel structure, the optimal acquisition price is always lower than the optimal acquisition price under centralized recycle channel structure, causing reduced recycle quantity and lower remanufactured quantity, which is similar to the effect of double marginalization in the normal forward supply chain. The cost difference between the two supply channels also increases such double marginalization impact. In order to reduce such supply chain inefficiency, two contracts (complete compensation and partial compensation) are proposed. It is shown that under certain conditions, both contracts are Pareto improving for the decentralized supply chain and can be used to coordinate the CLSC. Numerical examples are used to illustrate the results. The numerical examples show the different preferences of supply chain parties on different risk reductions in the decentralized system. In general, the interests on demand risk reduction is aligned between the recycle channel supplier and the manufacturer with the manufacturer showing higher motivation; on the other hand, recycle channel supplier and the manufacturer may have conflict of interests in supply risk reduction when the supply risk is low, and their interests are aligned when the supply risk is high.

Suggested Citation

  • He, Yuanjie, 2015. "Acquisition pricing and remanufacturing decisions in a closed-loop supply chain," International Journal of Production Economics, Elsevier, vol. 163(C), pages 48-60.
    • Handle: RePEc:eee:proeco:v:163:y:2015:i:c:p:48-60
    DOI: 10.1016/j.ijpe.2015.02.002
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925527315000365
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ijpe.2015.02.002?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Ma, Wei-min & Zhao, Zhang & Ke, Hua, 2013. "Dual-channel closed-loop supply chain with government consumption-subsidy," European Journal of Operational Research, Elsevier, vol. 226(2), pages 221-227.
    2. Xiong, Yu & Zhou, Yu & Li, Gendao & Chan, Hing-Kai & Xiong, Zhongkai, 2013. "Don’t forget your supplier when remanufacturing," European Journal of Operational Research, Elsevier, vol. 230(1), pages 15-25.
    3. Josephine Clemens & Karl Inderfurth, 2014. "Supply Chain coordination by contracts underbinomial production yield," FEMM Working Papers 140011, Otto-von-Guericke University Magdeburg, Faculty of Economics and Management.
    4. He, Yuanjie & Zhang, Jiang, 2008. "Random yield risk sharing in a two-level supply chain," International Journal of Production Economics, Elsevier, vol. 112(2), pages 769-781, April.
    5. Georgiadis, Patroklos & Athanasiou, Efstratios, 2013. "Flexible long-term capacity planning in closed-loop supply chains with remanufacturing," European Journal of Operational Research, Elsevier, vol. 225(1), pages 44-58.
    6. Chuang, Chia-Hung & Wang, Charles X. & Zhao, Yabing, 2014. "Closed-loop supply chain models for a high-tech product under alternative reverse channel and collection cost structures," International Journal of Production Economics, Elsevier, vol. 156(C), pages 108-123.
    7. Jen-Ming Chen & Chia-I Chang, 2012. "The economics of hybrid manufacturing systems in a closed-loop supply chain," Netnomics, Springer, vol. 13(2), pages 79-91, July.
    8. Kumar Jena, Sarat & Sarmah, S.P, 2014. "Price competition and co-operation in a duopoly closed-loop supply chain," International Journal of Production Economics, Elsevier, vol. 156(C), pages 346-360.
    9. Gopalakrishnan Easwaran & Halit Üster, 2010. "A closed-loop supply chain network design problem with integrated forward and reverse channel decisions," IISE Transactions, Taylor & Francis Journals, vol. 42(11), pages 779-792.
    10. J-M Chen & C-I Chang, 2012. "The economics of a closed-loop supply chain with remanufacturing," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 63(10), pages 1323-1335, October.
    11. Huang, Min & Song, Min & Lee, Loo Hay & Ching, Wai Ki, 2013. "Analysis for strategy of closed-loop supply chain with dual recycling channel," International Journal of Production Economics, Elsevier, vol. 144(2), pages 510-520.
    12. V. Daniel R. Guide, Jr. & Ruud H. Teunter & Luk N. Van Wassenhove, 2003. "Matching Demand and Supply to Maximize Profits from Remanufacturing," Manufacturing & Service Operations Management, INFORMS, vol. 5(4), pages 303-316, October.
    13. Cai, Xiaoqiang & Lai, Minghui & Li, Xiang & Li, Yongjian & Wu, Xianyi, 2014. "Optimal acquisition and production policy in a hybrid manufacturing/remanufacturing system with core acquisition at different quality levels," European Journal of Operational Research, Elsevier, vol. 233(2), pages 374-382.
    14. Sean X. Zhou & Yikun Yu, 2011. "TECHNICAL NOTE---Optimal Product Acquisition, Pricing, and Inventory Management for Systems with Remanufacturing," Operations Research, INFORMS, vol. 59(2), pages 514-521, April.
    15. Hammond, David & Beullens, Patrick, 2007. "Closed-loop supply chain network equilibrium under legislation," European Journal of Operational Research, Elsevier, vol. 183(2), pages 895-908, December.
    16. Mark Ferguson & V. Daniel R. Guide , Jr. & Gilvan C. Souza, 2006. "Supply Chain Coordination for False Failure Returns," Manufacturing & Service Operations Management, INFORMS, vol. 8(4), pages 376-393, August.
    17. Choi, Tsan-Ming & Li, Yongjian & Xu, Lei, 2013. "Channel leadership, performance and coordination in closed loop supply chains," International Journal of Production Economics, Elsevier, vol. 146(1), pages 371-380.
    18. R. Canan Savaskan & Shantanu Bhattacharya & Luk N. Van Wassenhove, 2004. "Closed-Loop Supply Chain Models with Product Remanufacturing," Management Science, INFORMS, vol. 50(2), pages 239-252, February.
    19. Yang, P.C. & Chung, S.L. & Wee, H.M. & Zahara, E. & Peng, C.Y., 2013. "Collaboration for a closed-loop deteriorating inventory supply chain with multi-retailer and price-sensitive demand," International Journal of Production Economics, Elsevier, vol. 143(2), pages 557-566.
    20. Lundin, Johan F., 2012. "Redesigning a closed-loop supply chain exposed to risks," International Journal of Production Economics, Elsevier, vol. 140(2), pages 596-603.
    21. Ketzenberg, Michael, 2009. "The value of information in a capacitated closed loop supply chain," European Journal of Operational Research, Elsevier, vol. 198(2), pages 491-503, October.
    22. Georgiadis, Patroklos & Vlachos, Dimitrios, 2004. "The effect of environmental parameters on product recovery," European Journal of Operational Research, Elsevier, vol. 157(2), pages 449-464, September.
    23. Östlin, Johan & Sundin, Erik & Björkman, Mats, 2008. "Importance of closed-loop supply chain relationships for product remanufacturing," International Journal of Production Economics, Elsevier, vol. 115(2), pages 336-348, October.
    24. De Giovanni, Pietro & Zaccour, Georges, 2014. "A two-period game of a closed-loop supply chain," European Journal of Operational Research, Elsevier, vol. 232(1), pages 22-40.
    25. Brandenburg, Marcus & Govindan, Kannan & Sarkis, Joseph & Seuring, Stefan, 2014. "Quantitative models for sustainable supply chain management: Developments and directions," European Journal of Operational Research, Elsevier, vol. 233(2), pages 299-312.
    26. Saibal Ray & Tamer Boyaci & Necati Aras, 2005. "Optimal Prices and Trade-in Rebates for Durable, Remanufacturable Products," Manufacturing & Service Operations Management, INFORMS, vol. 7(3), pages 208-228, January.
    27. Pan, Zhendong & Tang, Jiafu & Liu, Ou, 2009. "Capacitated dynamic lot sizing problems in closed-loop supply chain," European Journal of Operational Research, Elsevier, vol. 198(3), pages 810-821, November.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. He, Yuanjie, 2017. "Supply risk sharing in a closed-loop supply chain," International Journal of Production Economics, Elsevier, vol. 183(PA), pages 39-52.
    2. Matsui, Kenji, 2022. "Optimal timing of acquisition price announcement for used products in a dual-recycling channel reverse supply chain," European Journal of Operational Research, Elsevier, vol. 300(2), pages 615-632.
    3. Feng, Lipan & Govindan, Kannan & Li, Chunfa, 2017. "Strategic planning: Design and coordination for dual-recycling channel reverse supply chain considering consumer behavior," European Journal of Operational Research, Elsevier, vol. 260(2), pages 601-612.
    4. Pietro Giovanni & Georges Zaccour, 2019. "A selective survey of game-theoretic models of closed-loop supply chains," 4OR, Springer, vol. 17(1), pages 1-44, March.
    5. Ehsan Shekarian & Simme Douwe Flapper, 2021. "Analyzing the Structure of Closed-Loop Supply Chains: A Game Theory Perspective," Sustainability, MDPI, vol. 13(3), pages 1-32, January.
    6. Bo Wang & Ning Wang, 2022. "Decision Models for a Dual-Recycling Channel Reverse Supply Chain with Consumer Strategic Behavior," Sustainability, MDPI, vol. 14(17), pages 1-18, August.
    7. Pietro De Giovanni & Georges Zaccour, 2022. "A selective survey of game-theoretic models of closed-loop supply chains," Annals of Operations Research, Springer, vol. 314(1), pages 77-116, July.
    8. Yande Gong & Mengze Chen & Yuliang Zhuang, 2019. "Decision-Making and Performance Analysis of Closed-Loop Supply Chain under Different Recycling Modes and Channel Power Structures," Sustainability, MDPI, vol. 11(22), pages 1-26, November.
    9. Jochen Gönsch & Nora Dörmann, 2021. "On the influence of collection cost on reverse channel configuration," Journal of Business Economics, Springer, vol. 91(2), pages 179-213, March.
    10. Matsui, Kenji, 2023. "Dual-recycling channel reverse supply chain design of recycling platforms under acquisition price competition," International Journal of Production Economics, Elsevier, vol. 259(C).
    11. Wang, Wenbin & Zhang, Yu & Zhang, Kai & Bai, Tuo & Shang, Jennifer, 2015. "Reward–penalty mechanism for closed-loop supply chains under responsibility-sharing and different power structures," International Journal of Production Economics, Elsevier, vol. 170(PA), pages 178-190.
    12. Zhang, Abraham & Wang, Jason X. & Farooque, Muhammad & Wang, Yulan & Choi, Tsan-Ming, 2021. "Multi-dimensional circular supply chain management: A comparative review of the state-of-the-art practices and research," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 155(C).
    13. Maiti, T. & Giri, B.C., 2017. "Two-way product recovery in a closed-loop supply chain with variable markup under price and quality dependent demand," International Journal of Production Economics, Elsevier, vol. 183(PA), pages 259-272.
    14. Tong Shu & Yongjian Wang & Shou Chen & Shouyang Wang & Kin Keung Lai & Yan Yang, 2017. "Decisions on Remanufacturing with WTP Disparity and Recycling Competition under Government Subsidies," Sustainability, MDPI, vol. 9(9), pages 1-29, August.
    15. Felix T.S. Chan & Nan Li & S.H. Chung & Mozafar Saadat, 2017. "Management of sustainable manufacturing systems-a review on mathematical problems," International Journal of Production Research, Taylor & Francis Journals, vol. 55(4), pages 1210-1225, February.
    16. Huang, Yanting & Wang, Zongjun, 2017. "Information sharing in a closed-loop supply chain with technology licensing," International Journal of Production Economics, Elsevier, vol. 191(C), pages 113-127.
    17. He, Peng & He, Yong & Xu, Henry, 2019. "Channel structure and pricing in a dual-channel closed-loop supply chain with government subsidy," International Journal of Production Economics, Elsevier, vol. 213(C), pages 108-123.
    18. Min Huang & Pengxing Yi & TieLin Shi, 2017. "Triple Recycling Channel Strategies for Remanufacturing of Construction Machinery in a Retailer-Dominated Closed-Loop Supply Chain," Sustainability, MDPI, vol. 9(12), pages 1-19, December.
    19. He, Qidong & Wang, Nengmin & Yang, Zhen & He, Zhengwen & Jiang, Bin, 2019. "Competitive collection under channel inconvenience in closed-loop supply chain," European Journal of Operational Research, Elsevier, vol. 275(1), pages 155-166.
    20. Shizhen Bai & Ling Ge & Xuelian Zhang, 2022. "Platform or direct channel: government-subsidized recycling strategies for WEEE," Information Systems and e-Business Management, Springer, vol. 20(2), pages 347-369, June.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:163:y:2015:i:c:p:48-60. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.