[go: up one dir, main page]
IDEAS home Printed from https://ideas.repec.org/a/eee/ejores/v230y2013i1p15-25.html
   My bibliography  Save this article

Don’t forget your supplier when remanufacturing

Author

Listed:
  • Xiong, Yu
  • Zhou, Yu
  • Li, Gendao
  • Chan, Hing-Kai
  • Xiong, Zhongkai
Abstract
A popular assumption in the current literature on remanufacturing is that the whole new product is produced by an integrated manufacturer, which is inconsistent with most industries. In this paper, we model a decentralised closed-loop supply chain consisting of a key component supplier and a non-integrated manufacturer, and demonstrate that the interaction between these players significantly impacts the economic and environmental implications of remanufacturing. In our model, the non-integrated manufacturer can purchase new components from the supplier to produce new products, and remanufacture used components to produce remanufactured products. Thus, the non-integrated manufacturer is not only a buyer but also a rival to the supplier. In a steady state period, we analyse the performances of an integrated manufacturer and the decentralised supply chain. We find that, although the integrated manufacturer always benefits from remanufacturing, the remanufacturing opportunity may constitute a lose–lose situation to the supplier and the non-integrated manufacturer, making their profits be lower than in an identical supply chain without remanufacturing. In addition, the non-integrated manufacturer may be worse off with a lower remanufacturing cost or a larger return rate of used products due to the interaction with the supplier. We further demonstrate that the government-subsidised remanufacturing in the non-integrated (integrated) manufacturer is detrimental (beneficial) to the environment.

Suggested Citation

  • Xiong, Yu & Zhou, Yu & Li, Gendao & Chan, Hing-Kai & Xiong, Zhongkai, 2013. "Don’t forget your supplier when remanufacturing," European Journal of Operational Research, Elsevier, vol. 230(1), pages 15-25.
    • Handle: RePEc:eee:ejores:v:230:y:2013:i:1:p:15-25
    DOI: 10.1016/j.ejor.2013.03.034
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0377221713002671
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ejor.2013.03.034?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Ma, Wei-min & Zhao, Zhang & Ke, Hua, 2013. "Dual-channel closed-loop supply chain with government consumption-subsidy," European Journal of Operational Research, Elsevier, vol. 226(2), pages 221-227.
    2. Roland Geyer & Luk N. Van Wassenhove & Atalay Atasu, 2007. "The Economics of Remanufacturing Under Limited Component Durability and Finite Product Life Cycles," Management Science, INFORMS, vol. 53(1), pages 88-100, January.
    3. Giutini, Ron & Gaudette, Kevin, 2003. "Remanufacturing: The next great opportunity for boosting US productivity," Business Horizons, Elsevier, vol. 46(6), pages 41-48.
    4. Atalay Atasu & Miklos Sarvary & Luk N. Van Wassenhove, 2008. "Remanufacturing as a Marketing Strategy," Management Science, INFORMS, vol. 54(10), pages 1731-1746, October.
    5. Anil Arya & Brian Mittendorf & Dae-Hee Yoon, 2008. "Friction in Related-Party Trade When a Rival Is Also a Customer," Management Science, INFORMS, vol. 54(11), pages 1850-1860, November.
    6. Moritz Fleischmann & Jo A. E. E. van Nunen & Ben Gräve, 2003. "Integrating Closed-Loop Supply Chains and Spare-Parts Management at IBM," Interfaces, INFORMS, vol. 33(6), pages 44-56, December.
    7. Geraldo Ferrer & Jayashankar M. Swaminathan, 2006. "Managing New and Remanufactured Products," Management Science, INFORMS, vol. 52(1), pages 15-26, January.
    8. Hammond, David & Beullens, Patrick, 2007. "Closed-loop supply chain network equilibrium under legislation," European Journal of Operational Research, Elsevier, vol. 183(2), pages 895-908, December.
    9. Mitra, Supriya & Webster, Scott, 2008. "Competition in remanufacturing and the effects of government subsidies," International Journal of Production Economics, Elsevier, vol. 111(2), pages 287-298, February.
    10. Laurens G. Debo & L. Beril Toktay & Luk N. Van Wassenhove, 2005. "Market Segmentation and Product Technology Selection for Remanufacturable Products," Management Science, INFORMS, vol. 51(8), pages 1193-1205, August.
    11. R. Canan Savaskan & Shantanu Bhattacharya & Luk N. Van Wassenhove, 2004. "Closed-Loop Supply Chain Models with Product Remanufacturing," Management Science, INFORMS, vol. 50(2), pages 239-252, February.
    12. Ferrer, Geraldo & Swaminathan, Jayashankar M., 2010. "Managing new and differentiated remanufactured products," European Journal of Operational Research, Elsevier, vol. 203(2), pages 370-379, June.
    13. Vishal V. Agrawal & Mark Ferguson & L. Beril Toktay & Valerie M. Thomas, 2012. "Is Leasing Greener Than Selling?," Management Science, INFORMS, vol. 58(3), pages 523-533, March.
    14. Deishin Lee, 2012. "Turning Waste into By-Product," Manufacturing & Service Operations Management, INFORMS, vol. 14(1), pages 115-127, January.
    15. Kaya, Onur, 2010. "Incentive and production decisions for remanufacturing operations," European Journal of Operational Research, Elsevier, vol. 201(2), pages 442-453, March.
    16. Wu, Cheng-Han, 2012. "Product-design and pricing strategies with remanufacturing," European Journal of Operational Research, Elsevier, vol. 222(2), pages 204-215.
    17. Lim, Wei Shi & Tan, Soo Jiuan, 2010. "Outsourcing suppliers as downstream competitors: Biting the hand that feeds," European Journal of Operational Research, Elsevier, vol. 203(2), pages 360-369, June.
    18. Heese, Hans S. & Cattani, Kyle & Ferrer, Geraldo & Gilland, Wendell & Roth, Aleda V., 2005. "Competitive advantage through take-back of used products," European Journal of Operational Research, Elsevier, vol. 164(1), pages 143-157, July.
    19. Östlin, Johan & Sundin, Erik & Björkman, Mats, 2008. "Importance of closed-loop supply chain relationships for product remanufacturing," International Journal of Production Economics, Elsevier, vol. 115(2), pages 336-348, October.
    20. Teunter, Ruud H. & Flapper, Simme Douwe P., 2011. "Optimal core acquisition and remanufacturing policies under uncertain core quality fractions," European Journal of Operational Research, Elsevier, vol. 210(2), pages 241-248, April.
    21. V. Daniel R. Guide, Jr. & Ruud H. Teunter & Luk N. Van Wassenhove, 2003. "Matching Demand and Supply to Maximize Profits from Remanufacturing," Manufacturing & Service Operations Management, INFORMS, vol. 5(4), pages 303-316, October.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Han, Xiaohua & Yang, Qianxia & Shang, Jennifer & Pu, Xujin, 2017. "Optimal strategies for trade-old-for-remanufactured programs: Receptivity, durability, and subsidy," International Journal of Production Economics, Elsevier, vol. 193(C), pages 602-616.
    2. Xiaohua Han & Ying Shen & Yiwen Bian, 2020. "Optimal recovery strategy of manufacturers: Remanufacturing products or recycling materials?," Annals of Operations Research, Springer, vol. 290(1), pages 463-489, July.
    3. Zhou, Yu & Xiong, Yu & Jin, Minyue, 2021. "Less is more: Consumer education in a closed-loop supply chain with remanufacturing," Omega, Elsevier, vol. 101(C).
    4. Wu, Cheng-Han, 2015. "Strategic and operational decisions under sales competition and collection competition for end-of-use products in remanufacturing," International Journal of Production Economics, Elsevier, vol. 169(C), pages 11-20.
    5. Ma, Peng & Gong, Yeming & Mirchandani, Prakash, 2020. "Trade-in for remanufactured products: Pricing with double reference effects," International Journal of Production Economics, Elsevier, vol. 230(C).
    6. Wu, Xiaole & Zhou, Yu, 2019. "Buyer-specific versus uniform pricing in a closed-loop supply chain with third-party remanufacturing," European Journal of Operational Research, Elsevier, vol. 273(2), pages 548-560.
    7. Cheng-Han Wu, 2021. "Production-quality policy for a make-from-stock remanufacturing system," Flexible Services and Manufacturing Journal, Springer, vol. 33(2), pages 425-456, June.
    8. Zheng, Xiong & Govindan, Kannan & Deng, Qianzhou & Feng, Lipan, 2019. "Effects of design for the environment on firms’ production and remanufacturing strategies," International Journal of Production Economics, Elsevier, vol. 213(C), pages 217-228.
    9. Genc, Talat S. & Giovanni, Pietro De, 2017. "Trade-in and save: A two-period closed-loop supply chain game with price and technology dependent returns," International Journal of Production Economics, Elsevier, vol. 183(PB), pages 514-527.
    10. Xue, Dongmei & Teunter, Ruud H. & Zhu, Stuart X. & Zhou, Weihua, 2021. "Entering the high-end market by collecting and remanufacturing a competitor’s high-end cores," Omega, Elsevier, vol. 99(C).
    11. Ehsan Shekarian & Simme Douwe Flapper, 2021. "Analyzing the Structure of Closed-Loop Supply Chains: A Game Theory Perspective," Sustainability, MDPI, vol. 13(3), pages 1-32, January.
    12. Kangzhou Wang & Yingxue Zhao & Yonghong Cheng & Tsan-Ming Choi, 2014. "Cooperation or Competition? Channel Choice for a Remanufacturing Fashion Supply Chain with Government Subsidy," Sustainability, MDPI, vol. 6(10), pages 1-19, October.
    13. Huang, Yanting & Wang, Zongjun, 2017. "Values of information sharing: A comparison of supplier-remanufacturing and manufacturer-remanufacturing scenarios," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 106(C), pages 20-44.
    14. Chen, Jen-Ming & Chang, Chia-I, 2012. "The co-opetitive strategy of a closed-loop supply chain with remanufacturing," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 48(2), pages 387-400.
    15. Cetin, Can Baris & Zaccour, Georges, 2023. "Remanufacturing with innovative features: A strategic analysis," European Journal of Operational Research, Elsevier, vol. 310(2), pages 655-669.
    16. Lili Dai & Tong Shu & Shou Chen & Shouyang Wang & Kin Keung Lai, 2020. "CSR Remanufacturing Supply Chains under WTP Differentiation," Sustainability, MDPI, vol. 12(6), pages 1-19, March.
    17. De Giovanni, Pietro & Zaccour, Georges, 2019. "Optimal quality improvements and pricing strategies with active and passive product returns," Omega, Elsevier, vol. 88(C), pages 248-262.
    18. Huang, Yanting & Wang, Zongjun, 2017. "Information sharing in a closed-loop supply chain with technology licensing," International Journal of Production Economics, Elsevier, vol. 191(C), pages 113-127.
    19. Ghosh, Debabrata & Gouda, Sirish & Shankar, Ravi & Swami, Sanjeev & Thomas, Vinu Cheruvil, 2018. "Strategic decision making under subscription-based contracts for remanufacturing," International Journal of Production Economics, Elsevier, vol. 200(C), pages 134-150.
    20. He, Peng & He, Yong & Xu, Henry, 2019. "Channel structure and pricing in a dual-channel closed-loop supply chain with government subsidy," International Journal of Production Economics, Elsevier, vol. 213(C), pages 108-123.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:ejores:v:230:y:2013:i:1:p:15-25. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/eor .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.