[go: up one dir, main page]
IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v213y2019icp108-123.html
   My bibliography  Save this article

Channel structure and pricing in a dual-channel closed-loop supply chain with government subsidy

Author

Listed:
  • He, Peng
  • He, Yong
  • Xu, Henry
Abstract
This paper considers a dual-channel closed-loop supply chain (CLSC) where a manufacturer can distribute new products through an independent retailer and sell remanufactured products via a third-party firm or platform (3P) in the presence of possible government subsidy. The two main themes of this research are to explore channel structure and pricing decisions for the manufacturer and government's subsidy policy with competing new and remanufactured products. Three possible channel structures for manufacturer are investigated: (1) no direct sales (Structure D); (2) selling new products directly but distributing remanufactured products through the 3P (Structure MN); (3) selling remanufactured products directly but distributing new products via the retailer (Structure MR). We derive the manufacturer's optimal channel structure and pricing decisions, and government's optimal subsidy level under these three channel structures. We find that government can encourage the manufacturer to adopt desired channel structures by setting appropriate subsidy levels. Furthermore, higher subsidy level always benefits consumers and the whole supply chain, but not always so to the environment. Moreover, when government aims to minimize the environmental impact and subsidy expenditure, the manufacturer and government have different channel structure preferences when the cost saving from remanufacturing is very low or high. However, under a moderate cost saving, they have identical channel structure preference: both prefer Structure MN when the environmental impact discount is relatively high; otherwise, both prefer Structure MR.

Suggested Citation

  • He, Peng & He, Yong & Xu, Henry, 2019. "Channel structure and pricing in a dual-channel closed-loop supply chain with government subsidy," International Journal of Production Economics, Elsevier, vol. 213(C), pages 108-123.
    • Handle: RePEc:eee:proeco:v:213:y:2019:i:c:p:108-123
    DOI: 10.1016/j.ijpe.2019.03.013
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925527319300994
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ijpe.2019.03.013?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Ma, Wei-min & Zhao, Zhang & Ke, Hua, 2013. "Dual-channel closed-loop supply chain with government consumption-subsidy," European Journal of Operational Research, Elsevier, vol. 226(2), pages 221-227.
    2. Xiong, Yu & Zhou, Yu & Li, Gendao & Chan, Hing-Kai & Xiong, Zhongkai, 2013. "Don’t forget your supplier when remanufacturing," European Journal of Operational Research, Elsevier, vol. 230(1), pages 15-25.
    3. Cai, Gangshu (George), 2010. "Channel Selection and Coordination in Dual-Channel Supply Chains," Journal of Retailing, Elsevier, vol. 86(1), pages 22-36.
    4. Yan, Wei & Xiong, Yu & Xiong, Zhongkai & Guo, Nian, 2015. "Bricks vs. clicks: Which is better for marketing remanufactured products?," European Journal of Operational Research, Elsevier, vol. 242(2), pages 434-444.
    5. Benrong Zheng & Chao Yang & Jun Yang & Min Zhang, 2017. "Dual-channel closed loop supply chains: forward channel competition, power structures and coordination," International Journal of Production Research, Taylor & Francis Journals, vol. 55(12), pages 3510-3527, June.
    6. Yenipazarli, Arda, 2016. "Managing new and remanufactured products to mitigate environmental damage under emissions regulation," European Journal of Operational Research, Elsevier, vol. 249(1), pages 117-130.
    7. Geraldo Ferrer & Jayashankar M. Swaminathan, 2006. "Managing New and Remanufactured Products," Management Science, INFORMS, vol. 52(1), pages 15-26, January.
    8. Yunchuan Liu & Sunil Gupta & Z. John Zhang, 2006. "Note on Self-Restraint as an Online Entry-Deterrence Strategy," Management Science, INFORMS, vol. 52(11), pages 1799-1809, November.
    9. Chuang, Chia-Hung & Wang, Charles X. & Zhao, Yabing, 2014. "Closed-loop supply chain models for a high-tech product under alternative reverse channel and collection cost structures," International Journal of Production Economics, Elsevier, vol. 156(C), pages 108-123.
    10. Ferrer, Geraldo & Swaminathan, Jayashankar M., 2010. "Managing new and differentiated remanufactured products," European Journal of Operational Research, Elsevier, vol. 203(2), pages 370-379, June.
    11. Liu, Huihui & Lei, Ming & Deng, Honghui & Keong Leong, G. & Huang, Tao, 2016. "A dual channel, quality-based price competition model for the WEEE recycling market with government subsidy," Omega, Elsevier, vol. 59(PB), pages 290-302.
    12. Liu, Zhiyong & Li, Minqiang & Kou, Jisong, 2015. "Selling information products: Sale channel selection and versioning strategy with network externality," International Journal of Production Economics, Elsevier, vol. 166(C), pages 1-10.
    13. Huang, Min & Song, Min & Lee, Loo Hay & Ching, Wai Ki, 2013. "Analysis for strategy of closed-loop supply chain with dual recycling channel," International Journal of Production Economics, Elsevier, vol. 144(2), pages 510-520.
    14. V. Daniel R. Guide, Jr. & Ruud H. Teunter & Luk N. Van Wassenhove, 2003. "Matching Demand and Supply to Maximize Profits from Remanufacturing," Manufacturing & Service Operations Management, INFORMS, vol. 5(4), pages 303-316, October.
    15. Gan, Shu-San & Pujawan, I. Nyoman & Suparno, & Widodo, Basuki, 2017. "Pricing decision for new and remanufactured product in a closed-loop supply chain with separate sales-channel," International Journal of Production Economics, Elsevier, vol. 190(C), pages 120-132.
    16. Zhang, Peng & He, Yong & Shi, Chunming (Victor), 2017. "Retailer's channel structure choice: Online channel, offline channel, or dual channels?," International Journal of Production Economics, Elsevier, vol. 191(C), pages 37-50.
    17. Wang, Wei & Li, Gang & Cheng, T.C.E., 2016. "Channel selection in a supply chain with a multi-channel retailer: The role of channel operating costs," International Journal of Production Economics, Elsevier, vol. 173(C), pages 54-65.
    18. Mitra, Supriya & Webster, Scott, 2008. "Competition in remanufacturing and the effects of government subsidies," International Journal of Production Economics, Elsevier, vol. 111(2), pages 287-298, February.
    19. Hong, Xianpei & Xu, Lei & Du, Peng & Wang, Wenjuan, 2015. "Joint advertising, pricing and collection decisions in a closed-loop supply chain," International Journal of Production Economics, Elsevier, vol. 167(C), pages 12-22.
    20. Laurens G. Debo & L. Beril Toktay & Luk N. Van Wassenhove, 2005. "Market Segmentation and Product Technology Selection for Remanufacturable Products," Management Science, INFORMS, vol. 51(8), pages 1193-1205, August.
    21. Sheu, Jiuh-Biing, 2011. "Bargaining framework for competitive green supply chains under governmental financial intervention," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 47(5), pages 573-592, September.
    22. Meng, Xiaoge & Yao, Zhong & Nie, Jiajia & Zhao, Yingxue, 2018. "Make or buy? It is the question: A study in the presence of carbon tax," International Journal of Production Economics, Elsevier, vol. 195(C), pages 328-337.
    23. Liang, Yijiong & Pokharel, Shaligram & Lim, Geok Hian, 2009. "Pricing used products for remanufacturing," European Journal of Operational Research, Elsevier, vol. 193(2), pages 390-395, March.
    24. R. Canan Savaskan & Shantanu Bhattacharya & Luk N. Van Wassenhove, 2004. "Closed-Loop Supply Chain Models with Product Remanufacturing," Management Science, INFORMS, vol. 50(2), pages 239-252, February.
    25. Marcel Corstjens & Peter Doyle, 1979. "Channel Optimization in Complex Marketing Systems," Management Science, INFORMS, vol. 25(10), pages 1014-1025, October.
    26. Wu, Cheng-Han, 2012. "Price and service competition between new and remanufactured products in a two-echelon supply chain," International Journal of Production Economics, Elsevier, vol. 140(1), pages 496-507.
    27. Rajiv Lal & Miklos Sarvary, 1999. "When and How Is the Internet Likely to Decrease Price Competition?," Marketing Science, INFORMS, vol. 18(4), pages 485-503.
    28. Han, Xiaohua & Wu, Haiyan & Yang, Qianxia & Shang, Jennifer, 2016. "Reverse channel selection under remanufacturing risks: Balancing profitability and robustness," International Journal of Production Economics, Elsevier, vol. 182(C), pages 63-72.
    29. Khouja, Moutaz & Park, Sungjune & Cai, Gangshu (George), 2010. "Channel selection and pricing in the presence of retail-captive consumers," International Journal of Production Economics, Elsevier, vol. 125(1), pages 84-95, May.
    30. Ma, Zu-Jun & Zhou, Qin & Dai, Ying & Sheu, Jiuh-Biing, 2017. "Optimal pricing decisions under the coexistence of “trade old for new” and “trade old for remanufactured” programs," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 106(C), pages 337-352.
    31. Hafezalkotob, Ashkan, 2017. "Competition, cooperation, and coopetition of green supply chains under regulations on energy saving levels," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 97(C), pages 228-250.
    32. R. Canan Savaskan & Luk N. Van Wassenhove, 2006. "Reverse Channel Design: The Case of Competing Retailers," Management Science, INFORMS, vol. 52(1), pages 1-14, January.
    33. Chen, Xu & Wang, Xiaojun, 2015. "Free or bundled: Channel selection decisions under different power structures," Omega, Elsevier, vol. 53(C), pages 11-20.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ehsan Shekarian & Simme Douwe Flapper, 2021. "Analyzing the Structure of Closed-Loop Supply Chains: A Game Theory Perspective," Sustainability, MDPI, vol. 13(3), pages 1-32, January.
    2. Syed Asif Raza, 2022. "A bibliometric analysis of pricing models in supply chain," Journal of Revenue and Pricing Management, Palgrave Macmillan, vol. 21(2), pages 228-251, April.
    3. Pietro Giovanni & Georges Zaccour, 2019. "A selective survey of game-theoretic models of closed-loop supply chains," 4OR, Springer, vol. 17(1), pages 1-44, March.
    4. De, Arijit & Ray, Ankita & Kundu, Tanmoy & Sheu, Jiuh-Biing, 2023. "Is it wise to compete or to collaborate? Remanufacturing business models under collective extended producer responsibility legislation," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 179(C).
    5. Benrong Zheng & Chao Yang & Jun Yang & Min Zhang, 2017. "Dual-channel closed loop supply chains: forward channel competition, power structures and coordination," International Journal of Production Research, Taylor & Francis Journals, vol. 55(12), pages 3510-3527, June.
    6. Taleizadeh, Ata Allah & Sadeghi, Razieh, 2019. "Pricing strategies in the competitive reverse supply chains with traditional and e-channels: A game theoretic approach," International Journal of Production Economics, Elsevier, vol. 215(C), pages 48-60.
    7. Lijun Meng & Qiang Qiang & Zuqing Huang & Baoyou Zhang & Yuxiang Yang, 2020. "Optimal Pricing Strategy and Government Consumption Subsidy Policy in Closed-Loop Supply Chain with Third-Party Remanufacturer," Sustainability, MDPI, vol. 12(6), pages 1-29, March.
    8. Pietro De Giovanni & Georges Zaccour, 2022. "A selective survey of game-theoretic models of closed-loop supply chains," Annals of Operations Research, Springer, vol. 314(1), pages 77-116, July.
    9. Matsui, Kenji, 2022. "Optimal timing of acquisition price announcement for used products in a dual-recycling channel reverse supply chain," European Journal of Operational Research, Elsevier, vol. 300(2), pages 615-632.
    10. Ma, Peng & Gong, Yeming & Mirchandani, Prakash, 2020. "Trade-in for remanufactured products: Pricing with double reference effects," International Journal of Production Economics, Elsevier, vol. 230(C).
    11. Matsui, Kenji, 2023. "Dual-recycling channel reverse supply chain design of recycling platforms under acquisition price competition," International Journal of Production Economics, Elsevier, vol. 259(C).
    12. Yang, Lei & Hu, Yijuan & Huang, Lijuan, 2020. "Collecting mode selection in a remanufacturing supply chain under cap-and-trade regulation," European Journal of Operational Research, Elsevier, vol. 287(2), pages 480-496.
    13. Ze-Bin Wang & Yao-Yu Wang & Jian-Cai Wang, 2016. "Optimal distribution channel strategy for new and remanufactured products," Electronic Commerce Research, Springer, vol. 16(2), pages 269-295, June.
    14. Zhou, Qin & Meng, Chao & Yuen, Kum Fai, 2021. "Remanufacturing authorization strategy for competition among OEM, authorized remanufacturer, and unauthorized remanufacturer," International Journal of Production Economics, Elsevier, vol. 242(C).
    15. Hong, Xianpei & Xu, Lei & Du, Peng & Wang, Wenjuan, 2015. "Joint advertising, pricing and collection decisions in a closed-loop supply chain," International Journal of Production Economics, Elsevier, vol. 167(C), pages 12-22.
    16. Huang, Yanting & Wang, Zongjun, 2017. "Information sharing in a closed-loop supply chain with technology licensing," International Journal of Production Economics, Elsevier, vol. 191(C), pages 113-127.
    17. Kleber, Rainer & Reimann, Marc & Souza, Gilvan C. & Zhang, Weihua, 2020. "Two-sided competition with vertical differentiation in both acquisition and sales in remanufacturing," European Journal of Operational Research, Elsevier, vol. 284(2), pages 572-587.
    18. He, Qidong & Wang, Nengmin & Yang, Zhen & He, Zhengwen & Jiang, Bin, 2019. "Competitive collection under channel inconvenience in closed-loop supply chain," European Journal of Operational Research, Elsevier, vol. 275(1), pages 155-166.
    19. Ramani, Vinay & De Giovanni, Pietro, 2017. "A two-period model of product cannibalization in an atypical Closed-loop Supply Chain with endogenous returns: The case of DellReconnect," European Journal of Operational Research, Elsevier, vol. 262(3), pages 1009-1027.
    20. He, Qidong & Wang, Nengmin & Browning, Tyson R. & Jiang, Bin, 2022. "Competitive collection with convenience-perceived customers," European Journal of Operational Research, Elsevier, vol. 303(1), pages 239-254.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:213:y:2019:i:c:p:108-123. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.