[go: up one dir, main page]
IDEAS home Printed from https://ideas.repec.org/a/inm/ormnsc/v45y1999i5p733-747.html
   My bibliography  Save this article

Inventory Control in Hybrid Systems with Remanufacturing

Author

Listed:
  • Erwin van der Laan

    (Erasmus University, P.O. Box 1738, NL-3000 DR Rotterdam, The Netherlands)

  • Marc Salomon

    (Tilburg University, P.O. Box 90153, NL-5000 LE Tilburg, The Netherlands)

  • Rommert Dekker

    (Erasmus University, P.O. Box 1738, NL-3000 DR Rotterdam, The Netherlands)

  • Luk Van Wassenhove

    (INSEAD, Boulevard de Constance, F-77305 Fontainebleau, France)

Abstract
This paper is on production planning and inventory control in systems where manufacturing and remanufacturing operations occur simultaneously. Typical for these hybridsystems is, that both the output of the manufacturing process and the output of the remanufacturing process can be used to fulfill customer demands. Here, we consider a relatively simple hybrid system, related to a single component durable product. For this system, we present a methodology to analyse a PUSH control strategy (in which all returned products are remanufactured as early as possible) and a PULL control strategy (in which all returned products are remanufactured as late as is convenient). The main contributions of this paper are (i) to compare traditional systems without remanufacturing to PUSH and to PULL controlled systems with remanufacturing, and (ii) to derive managerial insights into the inventory related effects of remanufacturing.

Suggested Citation

  • Erwin van der Laan & Marc Salomon & Rommert Dekker & Luk Van Wassenhove, 1999. "Inventory Control in Hybrid Systems with Remanufacturing," Management Science, INFORMS, vol. 45(5), pages 733-747, May.
    • Handle: RePEc:inm:ormnsc:v:45:y:1999:i:5:p:733-747
    DOI: 10.1287/mnsc.45.5.733
    as

    Download full text from publisher

    File URL: http://dx.doi.org/10.1287/mnsc.45.5.733
    Download Restriction: no
    File URL: https://libkey.io/10.1287/mnsc.45.5.733?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. van der Laan, Erwin & Dekker, Rommert & Salomon, Marc & Ridder, Ad, 1996. "An (s, Q) inventory model with remanufacturing and disposal," International Journal of Production Economics, Elsevier, vol. 46(1), pages 339-350, December.
    2. Kamran Moinzadeh & Steven Nahmias, 1988. "A Continuous Review Model for an Inventory System with Two Supply Modes," Management Science, INFORMS, vol. 34(6), pages 761-773, June.
    3. George M. Constantinides & Scott F. Richard, 1978. "Existence of Optimal Simple Policies for Discounted-Cost Inventory and Cash Management in Continuous Time," Operations Research, INFORMS, vol. 26(4), pages 620-636, August.
    4. Ronald W. Wolff, 1982. "Poisson Arrivals See Time Averages," Operations Research, INFORMS, vol. 30(2), pages 223-231, April.
    5. van der Laan, Erwin & Salomon, Marc, 1997. "Production planning and inventory control with remanufacturing and disposal," European Journal of Operational Research, Elsevier, vol. 102(2), pages 264-278, October.
    6. Cho, Danny I. & Parlar, Mahmut, 1991. "A survey of maintenance models for multi-unit systems," European Journal of Operational Research, Elsevier, vol. 51(1), pages 1-23, March.
    7. Vincent P. Simpson, 1978. "Optimum Solution Structure for a Repairable Inventory Problem," Operations Research, INFORMS, vol. 26(2), pages 270-281, April.
    8. van der Laan, Erwin & Salomon, Marc & Dekker, Rommert, 1999. "An investigation of lead-time effects in manufacturing/remanufacturing systems under simple PUSH and PULL control strategies," European Journal of Operational Research, Elsevier, vol. 115(1), pages 195-214, May.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Pinçe, Çerag & Gürler, Ülkü & Berk, Emre, 2008. "A continuous review replenishment-disposal policy for an inventory system with autonomous supply and fixed disposal costs," European Journal of Operational Research, Elsevier, vol. 190(2), pages 421-442, October.
    2. Fleischmann, Moritz & Bloemhof-Ruwaard, Jacqueline M. & Dekker, Rommert & van der Laan, Erwin & van Nunen, Jo A. E. E. & Van Wassenhove, Luk N., 1997. "Quantitative models for reverse logistics: A review," European Journal of Operational Research, Elsevier, vol. 103(1), pages 1-17, November.
    3. Bayindir, Z. Pelin & Erkip, Nesim & Gullu, Refik, 2003. "A model to evaluate inventory costs in a remanufacturing environment," International Journal of Production Economics, Elsevier, vol. 81(1), pages 597-607, January.
    4. Vercraene, Samuel & Gayon, Jean-Philippe & Flapper, Simme Douwe, 2014. "Coordination of manufacturing, remanufacturing and returns acceptance in hybrid manufacturing/remanufacturing systems," International Journal of Production Economics, Elsevier, vol. 148(C), pages 62-70.
    5. Hsueh, Che-Fu, 2011. "An inventory control model with consideration of remanufacturing and product life cycle," International Journal of Production Economics, Elsevier, vol. 133(2), pages 645-652, October.
    6. Kiesmuller, G. P., 2003. "Optimal control of a one product recovery system with leadtimes," International Journal of Production Economics, Elsevier, vol. 81(1), pages 333-340, January.
    7. Fleischmann, Moritz & Kuik, Roelof, 2003. "On optimal inventory control with independent stochastic item returns," European Journal of Operational Research, Elsevier, vol. 151(1), pages 25-37, November.
    8. Bayindir, Z.P. & Erkip, N. & Gullu, R., 2003. "Assessing the benefits of remanufacturing option under one-way substitution and capacity constraint," Econometric Institute Research Papers EI 2003-19, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    9. Z P Bayındır & N Erkip & R Güllü, 2005. "Assessing the benefits of remanufacturing option under one-way substitution," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 56(3), pages 286-296, March.
    10. Gregory A. DeCroix, 2006. "Optimal Policy for a Multiechelon Inventory System with Remanufacturing," Operations Research, INFORMS, vol. 54(3), pages 532-543, June.
    11. Poles, Roberto, 2013. "System Dynamics modelling of a production and inventory system for remanufacturing to evaluate system improvement strategies," International Journal of Production Economics, Elsevier, vol. 144(1), pages 189-199.
    12. Vercraene, Samuel & Gayon, Jean-Philippe, 2013. "Optimal control of a production-inventory system with productreturns," International Journal of Production Economics, Elsevier, vol. 142(2), pages 302-310.
    13. Ahiska, S. Sebnem & King, Russell E., 2010. "Life cycle inventory policy characterizations for a single-product recoverable system," International Journal of Production Economics, Elsevier, vol. 124(1), pages 51-61, March.
    14. Gayon, Jean-Philippe & Vercraene, Samuel & Flapper, Simme Douwe P., 2017. "Optimal control of a production-inventory system with product returns and two disposal options," European Journal of Operational Research, Elsevier, vol. 262(2), pages 499-508.
    15. Jian Yang & Boaz Golany & Gang Yu, 2005. "A concave‐cost production planning problem with remanufacturing options," Naval Research Logistics (NRL), John Wiley & Sons, vol. 52(5), pages 443-458, August.
    16. Kiesmuller, G. P., 2003. "A new approach for controlling a hybrid stochastic manufacturing/remanufacturing system with inventories and different leadtimes," European Journal of Operational Research, Elsevier, vol. 147(1), pages 62-71, May.
    17. Kim, Eungab & Saghafian, Soroush & Van Oyen, Mark P., 2013. "Joint control of production, remanufacturing, and disposal activities in a hybrid manufacturing–remanufacturing system," European Journal of Operational Research, Elsevier, vol. 231(2), pages 337-348.
    18. Inderfurth, Karl & van der Laan, Erwin, 2001. "Leadtime effects and policy improvement for stochastic inventory control with remanufacturing," International Journal of Production Economics, Elsevier, vol. 71(1-3), pages 381-390, May.
    19. Nenes, George & Panagiotidou, Sofia & Dekker, Rommert, 2010. "Inventory control policies for inspection and remanufacturing of returns: A case study," International Journal of Production Economics, Elsevier, vol. 125(2), pages 300-312, June.
    20. Mahadevan, B. & Pyke, David F. & Fleischmann, Moritz, 2003. "Periodic review, push inventory policies for remanufacturing," European Journal of Operational Research, Elsevier, vol. 151(3), pages 536-551, December.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:inm:ormnsc:v:45:y:1999:i:5:p:733-747. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Chris Asher (email available below). General contact details of provider: https://edirc.repec.org/data/inforea.html .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.