Grizzco Roller
From Inkipedia, the Splatoon wiki
The Grizzco Roller is a Salmon Run Next Wave rare weapon in Splatoon 3. It appears to be an illegitimately modified[1] Dynamo Roller.
Description
The Grizzco Roller is equipped with a motor engine, providing an extremely fast roll, faster than even the Inkbrush, that deals heavy damage to any Salmonid it touches. It can perform a quick horizontal swing that deals similar damage to the base Dynamo Roller, and a very slow but highly powerful vertical swing.
Appearance
This section is incomplete or is missing information.
You can help the wiki by filling in the blanks.
The Grizzco Roller has an engine with visible wires on its side. The paint roller portion has a hexagon pattern.
Splatoon 3
Grizzco Roller
| Basic information | |
|---|---|
| Category | Main |
| Class |  Roller
|
| Specifications | |
| Base damage | 50-150 (Ground) 400-600 (Midair) 400 (Roll) |
| Ink consumption | 5% (Ground) 20% (Midair) 1.2%-6% (Roll) |
The Grizzco Roller is one of the rare weapons in Salmon Run Next Wave. It was made available for the first time at 8 June 2024 at 00:00 UTC.
Data
- The Grizzco Roller is a heavyweight weapon.
- Ink consumption per second while rolling scales from 1.2% to 6% depending on the rolling speed.
- While rolling, the player's movement speed is set to 0.128 units per frame.
- After rolling for 0.27 seconds, the player begins to dash.
- When dashing, the player's movement speed is set to 0.3 units per frame.
- Hitting an opponent while rolling deals 400 damage.
- While rolling, the Grizzco Roller leaves an ink trail that is 5.6 units wide.
Horizontal swing (from ground)
- The ink consumption of 5% allows players to attack 20 times before needing to refill the ink supply.
- When attacking, it takes 12 frames to lift the roller (0.2 seconds).
- When attacking while moving, the player's movement speed is set to 0.036 units per frame.
- After swinging, there is a 0.67 second cooldown before the ink tank starts refilling.
- Attacks have a base damage of 150.
- For normal attacks, ink loses damage based on distance traveled. Ink starts losing damage at 3.5 units and stops losing damage at 5.2 units. The minimum damage is 50.
- The lethal range is 4.6 units, as this is the farthest distance where ink deals 100 damage.
- If a glob of ink is in the air for more than 25 frames after being flung, it loses damage each frame until frame 45, at which point it will deal 50% of its original damage.
- Ink flung from the center of the roller does the greatest damage. Ink that is flung at an angle greater than 14.5 degrees to the left or right will have lower damage. This low-damage ink starts losing damage after traveling a distance of 3.0 units and stops losing damage at 5.0 units. The maximum damage is 150 and the minimum damage is 50.
Vertical swing (from air)
- The ink consumption of 20% allows players to attack 5 times before needing to refill the ink supply.
- When attacking, it takes 72 frames to lift the roller (1.2 seconds).
- When attacking while moving, the player's movement speed is set to 0.016 units per frame.
- After swinging, there is a 1.25 second cooldown before the ink tank starts refilling.
- Attacks have a base damage of 600.
- For normal attacks, ink loses damage based on distance traveled. Ink starts losing damage at 8.2 units and stops losing damage at 18.5 units. The minimum damage is 400.
- If a glob of ink is in the air for more than 30 frames after being flung, it loses damage each frame until frame 45, at which point it will deal 50% of its original damage.
- Ink flung from the center of the roller does the greatest damage. Ink that is flung at an angle greater than 5.0 degrees to the left or right will have lower damage. This low-damage ink starts losing damage after traveling a distance of 4.2 units and stops losing damage at 14.2 units. The maximum damage is 600 and the minimum damage is 400.
Availability
In Splatoon 3, the Grizzco Roller was available during the following wildcard rotations:
| Start time | Stage | Weapons | Rare weapon | |||
|---|---|---|---|---|---|---|
| 8 June 2024 at 00:00 UTC | Multiple Sites (Big Run) | 
|
|
|
|
 Grizzco Roller
|
| 21 June 2024 at 16:00 UTC | Salmonid Smokeyard | 
|
|
|
|
       Any
|
| 6 July 2024 at 16:00 UTC | Jammin' Salmon Junction |
|
|
|
|
Any
|
| 20 July 2024 at 00:00 UTC | Bonerattle Arena |
|
|
|
|
Any
|
| 2 August 2024 at 00:00 UTC | Jammin' Salmon Junction | 
|
|
|
|
Any
|
| 17 August 2024 at 08:00 UTC | Gone Fission Hydroplant | 
|
|
|
|
Any
|
| 7 September 2024 at 08:00 UTC | Grand Splatlands Bowl (Big Run) |
|
|
|
|
Any
|
| 20 September 2024 at 08:00 UTC | Bonerattle Arena | 
|
|
|
|
Any
|
| 5 October 2024 at 16:00 UTC | Marooner's Bay |
|
|
|
|
Any
|
| 19 October 2024 at 00:00 UTC | Sockeye Station | 
|
|
|
|
Any
|
Gallery
-
Promotional teaser
-
Grizzco Roller 2D icon
-
Held by a player
-
Held down by a player
-
A demonstration of the Grizzco Roller. (link to file)
Trivia
- Since momentum is kept when jumping after rolling, players are able to perform wider jumps after rolling than when swimming and jumping in swim form.
Names in other languages
| Language | Name | Meaning |
|---|---|---|
| クマサン印のローラー Kuma-san shirushi no rōrā |
Mr. Bear-branded Roller | |
| Beer & Co-roller | Grizzco Roller | |
| Rouleau M. Ours Cie | ||
| Rouleau M. Ours SA | Mr. Bear Ltd. Roller | |
| Bär-Roller | Bear-Roller | |
| Rullo Ursus | Grizzco Roller (Ursus = Mr. Grizz) | |
| Валик «Потапыч Inc.» Valik «Potapych Inc.» |
Roller «Potapych Inc.» | |
| Rodillo Don Oso | Grizzco Roller | |
| 熊先生印章滚筒 | ||
| 熊先生印章滾筒 | ||
| Mr. 베어표 롤러 Mr. Beeopyo Rolra |
Mr. Bear-branded Roller | |
| Roller_Bear_Coop[2] |
