[go: up one dir, main page]
IDEAS home Printed from https://ideas.repec.org/p/nbr/nberwo/27436.html
   My bibliography  Save this paper

‘Mechanization Takes Command’: Inanimate Power and Labor Productivity in Late Nineteenth Century American Manufacturing

Author

Listed:
  • Jeremy Atack
  • Robert A. Margo
  • Paul Rhode
Abstract
During the nineteenth century, the US manufacturing sector shifted away from the “hand labor” mode of production, characteristic of artisan shops, to the “machine labor” of the factory. This was the focus of an extremely detailed but extraordinarily complex study by the Commissioner of Labor published in 1899 that has until now defied systematic analysis. Here, we explore the overall productivity gains associated with these changes in production methods and the specific, causal role of inanimate power. Under the machine labor mode, the time necessary to complete production tasks declined by 85 percent, a remarkable gain in labor productivity. We also present OLS and IV estimates of the effects of using inanimate power, such as steam, at the production operation level Our IV is based on the gerunds describing the various production activities. Treating our IV estimates as causal, about one-third of the higher productivity of machine labor is attributed to greater use of inanimate power per se.

Suggested Citation

  • Jeremy Atack & Robert A. Margo & Paul Rhode, 2020. "‘Mechanization Takes Command’: Inanimate Power and Labor Productivity in Late Nineteenth Century American Manufacturing," NBER Working Papers 27436, National Bureau of Economic Research, Inc.
    • Handle: RePEc:nbr:nberwo:27436
    Note: DAE
    as

    Download full text from publisher

    File URL: http://www.nber.org/papers/w27436.pdf
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Richard Hornbeck & Martin Rotemberg, 2019. "Railroads, Reallocation, and the Rise of American Manufacturing," NBER Working Papers 26594, National Bureau of Economic Research, Inc.
    2. Atack, Jeremy & Bateman, Fred & Margo, Robert A., 2003. "Productivity in manufacturing and the length of the working day: evidence from the 1880 census of manufactures," Explorations in Economic History, Elsevier, vol. 40(2), pages 170-194, April.
    3. Jeremy Atack & Fred Bateman & Robert A. Margo, 2005. "Capital deepening and the rise of the factory: the American experience during the nineteenth century," Economic History Review, Economic History Society, vol. 58(3), pages 586-595, August.
    4. Jeremy Atack & Robert A. Margo & Paul W. Rhode, 2019. ""Automation" of Manufacturing in the Late Nineteenth Century: The Hand and Machine Labor Study," Journal of Economic Perspectives, American Economic Association, vol. 33(2), pages 51-70, Spring.
    5. Broadberry, Stephen N., 1998. "How Did the United States and Germany Overtake Britian? A Sectoral Analysis of Comparative Productivity Levels, 1870–1990," The Journal of Economic History, Cambridge University Press, vol. 58(2), pages 375-407, June.
    6. Taylor, Frederick Winslow, 1911. "The Principles of Scientific Management," History of Economic Thought Books, McMaster University Archive for the History of Economic Thought, number taylor1911.
    7. Matthew Gentzkow & Bryan Kelly & Matt Taddy, 2019. "Text as Data," Journal of Economic Literature, American Economic Association, vol. 57(3), pages 535-574, September.
    8. Atack, Jeremy & Bateman, Fred & Weiss, Thomas, 1980. "The Regional Diffusion and Adoption of the Steam Engine in American Manufacturing," The Journal of Economic History, Cambridge University Press, vol. 40(2), pages 281-308, June.
    9. Kim, Sukkoo, 2005. "Industrialization and urbanization: Did the steam engine contribute to the growth of cities in the United States?," Explorations in Economic History, Elsevier, vol. 42(4), pages 586-598, October.
    10. Angrist, J D & Imbens, G W & Krueger, A B, 1999. "Jackknife Instrumental Variables Estimation," Journal of Applied Econometrics, John Wiley & Sons, Ltd., vol. 14(1), pages 57-67, Jan.-Feb..
    11. Devine, Warren D., 1983. "From Shafts to Wires: Historical Perspective on Electrification," The Journal of Economic History, Cambridge University Press, vol. 43(2), pages 347-372, June.
    12. Temin, Peter, 1966. "Steam and Waterpower in the Early Nineteenth Century," The Journal of Economic History, Cambridge University Press, vol. 26(2), pages 187-205, June.
    13. William J. Collins & Robert A. Margo, 2015. "Enterprising America: Businesses, Banks, and Credit Markets in Historical Perspective," NBER Books, National Bureau of Economic Research, Inc, number coll13-1.
    14. Sukkoo Kim, 2005. "Industrialization and Urbanization: Did the Steam Engine Contribute to the Growth of Cities in the United States?," NBER Working Papers 11206, National Bureau of Economic Research, Inc.
    15. Atack, Jeremy, 1979. "Fact in fiction? The relative costs of steam and water power: a simulation approach," Explorations in Economic History, Elsevier, vol. 16(4), pages 409-437, October.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Atack, Jeremy & Margo, Robert A. & Rhode, Paul W., 2022. "Industrialization and urbanization in nineteenth century America," Regional Science and Urban Economics, Elsevier, vol. 94(C).
    2. Jacopo Staccioli & Maria Enrica Virgillito, 2021. "Back to the past: the historical roots of labor-saving automation," Eurasian Business Review, Springer;Eurasia Business and Economics Society, vol. 11(1), pages 27-57, March.
    3. Jacopo Staccioli & Maria Enrica Virgillito, 2020. "The present, past, and future of labor-saving technologies," LEM Papers Series 2020/37, Laboratory of Economics and Management (LEM), Sant'Anna School of Advanced Studies, Pisa, Italy.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Atack, Jeremy & Bateman, Fred & Margo, Robert A., 2008. "Steam power, establishment size, and labor productivity growth in nineteenth century American manufacturing," Explorations in Economic History, Elsevier, vol. 45(2), pages 185-198, April.
    2. Alex W. Chernoff, 2021. "Firm heterogeneity, technology adoption and the spatial distribution of population: Theory and measurement," Canadian Journal of Economics/Revue canadienne d'économique, John Wiley & Sons, vol. 54(2), pages 475-521, May.
    3. Atack, Jeremy & Margo, Robert A. & Rhode, Paul W., 2022. "Industrialization and urbanization in nineteenth century America," Regional Science and Urban Economics, Elsevier, vol. 94(C).
    4. Jeremy Atack & Robert A. Margo & Paul W. Rhode, 2019. ""Automation" of Manufacturing in the Late Nineteenth Century: The Hand and Machine Labor Study," Journal of Economic Perspectives, American Economic Association, vol. 33(2), pages 51-70, Spring.
    5. Shih-tse Lo & Dhanoos Sutthiphisal, 2008. "Crossover Inventions And Knowledge Diffusion Of General Purpose Technologies? Evidence From The Electrical Technology," NBER Working Papers 14043, National Bureau of Economic Research, Inc.
    6. Kim, Sukkoo, 2004. "Industrialization and Urbanization: Did the Steam Engine Contribute to the Growth of Cities in the United States?," Institute of European Studies, Working Paper Series qt4hd75171, Institute of European Studies, UC Berkeley.
    7. Sukkoo Kim, 2007. "Immigration, Industrial Revolution and Urban Growth in the United States, 1820-1920: Factor Endowments, Technology and Geography," NBER Working Papers 12900, National Bureau of Economic Research, Inc.
    8. Theresa Gutberlet, 2014. "Mechanization and the spatial distribution of industries in the German Empire, 1875 to 1907," Economic History Review, Economic History Society, vol. 67(2), pages 463-491, May.
    9. Atack, Jeremy & Margo, Robert A. & Rhode, Paul W., 2024. "De-skilling: Evidence from late nineteenth century American manufacturing," Explorations in Economic History, Elsevier, vol. 91(C).
    10. Nathan Rosenberg & Manuel Trajtenberg, 2001. "A General Purpose Technology at Work: The Corliss Steam Engine in the late 19th Century US," NBER Working Papers 8485, National Bureau of Economic Research, Inc.
    11. Harald Edquist & Magnus Henrekson, 2006. "Technological Breakthroughs and Productivity Growth," Research in Economic History, in: Research in Economic History, pages 1-53, Emerald Group Publishing Limited.
    12. Jeremy Atack & Robert A. Margo & Paul W. Rhode, 2024. "Wage Inequality in American Manufacturing, 1820–1940: New Evidence," NBER Chapters, in: The Economic History of American Inequality: New Evidence and Perspectives, National Bureau of Economic Research, Inc.
    13. Kim, Sukkoo, 2005. "Industrialization and urbanization: Did the steam engine contribute to the growth of cities in the United States?," Explorations in Economic History, Elsevier, vol. 42(4), pages 586-598, October.
    14. Alan L. Olmstead & Paul W. Rhode, 2014. "Were Antebellum Cotton Plantations Factories in the Field?," NBER Chapters, in: Enterprising America: Businesses, Banks, and Credit Markets in Historical Perspective, pages 245-276, National Bureau of Economic Research, Inc.
    15. Avi Goldfarb, 2024. "Pause artificial intelligence research? Understanding AI policy challenges," Canadian Journal of Economics/Revue canadienne d'économique, John Wiley & Sons, vol. 57(2), pages 363-377, May.
    16. Long Zhou & Guoqiang Shen & Yao Wu & Robert Brown & Tian Chen & Chenyu Wang, 2018. "Urban Form, Growth, and Accessibility in Space and Time: Anatomy of Land Use at the Parcel-Level in a Small to Medium-Sized American City," Sustainability, MDPI, vol. 10(12), pages 1-24, December.
    17. Md Shahab Uddin & Mokbul Morshed Ahmad & Pennung Warnitchai, 2018. "Surge dynamics of disaster displaced populations in temporary urban shelters: future challenges and management issues," Natural Hazards: Journal of the International Society for the Prevention and Mitigation of Natural Hazards, Springer;International Society for the Prevention and Mitigation of Natural Hazards, vol. 94(1), pages 201-225, October.
    18. Yongseung Han & Arthur Snow & Ronald S. Warren, 2021. "Changes in the productive efficiency of U.S. flour mills in the late nineteenth century: an input-distance-function approach," Journal of Productivity Analysis, Springer, vol. 56(2), pages 115-132, December.
    19. Sukkoo Kim, 2005. "Industrialization and Urbanization: Did the Steam Engine Contribute to the Growth of Cities in the United States?," NBER Working Papers 11206, National Bureau of Economic Research, Inc.
    20. Charles W. Calomiris & Christopher Hanes, 1994. "Historical Macroeconomics and American Macroeconomic History," NBER Working Papers 4935, National Bureau of Economic Research, Inc.

    More about this item

    JEL classification:

    • N61 - Economic History - - Manufacturing and Construction - - - U.S.; Canada: Pre-1913
    • O14 - Economic Development, Innovation, Technological Change, and Growth - - Economic Development - - - Industrialization; Manufacturing and Service Industries; Choice of Technology
    • O33 - Economic Development, Innovation, Technological Change, and Growth - - Innovation; Research and Development; Technological Change; Intellectual Property Rights - - - Technological Change: Choices and Consequences; Diffusion Processes

    NEP fields

    This paper has been announced in the following NEP Reports:

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:nbr:nberwo:27436. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: the person in charge (email available below). General contact details of provider: https://edirc.repec.org/data/nberrus.html .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.