[go: up one dir, main page]
IDEAS home Printed from https://ideas.repec.org/p/gro/rugggd/200047.html
   My bibliography  Save this paper

Multilateralisation of manufacturing sector comparisons : issues, methods and empirical results

Author

Listed:
  • Prasada Rao, D.S.
  • Timmer, Marcel

    (Groningen University)

Abstract
This paper examines the feasibility of constructing a consistent set of multilateral comparisons of manufacturing sector output and productivity within the framework of the ICOP project. A major objective of the paper is to construct truly multilateral comparisons using the existing data base of the ICOP project. This data base consists of data constructed essentially on the basis of detailed bilateral comparisons. Multilateral unit value ratios are built up from the lowest level possible (the product level). The second objective of the paper is to examine in-depth the problem of aggregation of unit value ratios. Various aggregation methods, both well-known methods and new ones, are applied and sensitivity of the results is examined. New multilateral aggregation methods are developed which take into account differences in number of matches of the underlying binary comparisons, as well as the Laspeyres-Paasche spread which is considered to be a general indicator of reliability. Finally, the paper presents empirical results derived from the application of the above procedures to data for eight countries for the 1987 benchmark year.

Suggested Citation

  • Prasada Rao, D.S. & Timmer, Marcel, 2000. "Multilateralisation of manufacturing sector comparisons : issues, methods and empirical results," GGDC Research Memorandum 200047, Groningen Growth and Development Centre, University of Groningen.
    • Handle: RePEc:gro:rugggd:200047
    as

    Download full text from publisher

    File URL: http://irs.ub.rug.nl/ppn/242561683
    Download Restriction: no
    ---><---

    Other versions of this item:

    References listed on IDEAS

    as
    1. R. G. D. Allen, 1975. "Index Numbers in Theory and Practice," Palgrave Macmillan Books, Palgrave Macmillan, number 978-1-349-02312-7, March.
    2. van Ark, Bart & Maddison, Angus, 1988. "Comparisons of real output in manufacturing," Policy Research Working Paper Series 5, The World Bank.
    3. repec:dgr:rugggd:199627 is not listed on IDEAS
    4. repec:bla:revinw:v:42:y:1996:i:2:p:113-30 is not listed on IDEAS
    5. Bart van Ark & Erik Monnikhof & Nanno Mulder, 1999. "Productivity in services: an international comparative perspective," Canadian Journal of Economics, Canadian Economics Association, vol. 32(2), pages 471-499, April.
    6. Marcel P. Timmer, 2000. "The Dynamics of Asian Manufacturing," Books, Edward Elgar Publishing, number 1927.
    7. Dirk Pilat, 1994. "The Economics Of Rapid Growth," Books, Edward Elgar Publishing, number 360.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. repec:dgr:rugggd:200362 is not listed on IDEAS
    2. Castaldi, Carolina & Sapio, Sandro, 2006. "The Properties of Sectoral Growth: Evidence from Four Large European Economies," GGDC Research Memorandum GD-88, Groningen Growth and Development Centre, University of Groningen.
    3. repec:dgr:rugggd:gd-88 is not listed on IDEAS
    4. repec:dgr:rugsom:03c20 is not listed on IDEAS
    5. Bart van Ark & Marcel Timmer, 2001. "The ICOP Manufacturing Database: International Comparisons of Productivity Levels," International Productivity Monitor, Centre for the Study of Living Standards, vol. 3, pages 44-51, Fall.
    6. Robert J. Hill, 2004. "Constructing Price Indexes across Space and Time: The Case of the European Union," American Economic Review, American Economic Association, vol. 94(5), pages 1379-1410, December.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. repec:dgr:rugggd:200047 is not listed on IDEAS
    2. Boon Lee & William Shepherd, 2000. "Output and Productivity Comparisons of the Transport and Communication Sectors of South Korea and Australia, 1990 to 1998," School of Economics and Finance Discussion Papers and Working Papers Series 081, School of Economics and Finance, Queensland University of Technology.
    3. Timmer, Marcel P., 1999. "Climbing the Technology Ladder Too Fast? An International Comparison of Productivity in South and East- Asian Manufacturing, 1963-1993," Working Papers 99.2, Eindhoven Center for Innovation Studies.
    4. Timmer, Marcel & Ypma, Gerard & van Ark, Bart van, 2007. "PPPs for Industry Output: A New Dataset for International Comparisons," GGDC Research Memorandum GD-82, Groningen Growth and Development Centre, University of Groningen.
    5. repec:dgr:rugggd:200251 is not listed on IDEAS
    6. Lee, Boon & Shepherd, William, 2002. "Comparative Analysis of Transport and Communications Korea and Australia," MPRA Paper 10412, University Library of Munich, Germany.
    7. repec:dgr:rugggd:gd-82 is not listed on IDEAS
    8. Boon Lee & William Shepherd, 2002. "Comparative Analysis of Output and Productivity in the Transport and Communication Sector: South Korea and Australia, 1990 to 1999," Journal of Economic Development, Chung-Ang Unviersity, Department of Economics, vol. 27(1), pages 53-75, June.
    9. Boon L. Lee & William Shepherd, 2009. "Output and Productivity Performance of Hong Kong and Singapore's Transport and Communications Sector, 1990 to 2005," Asian Economic Journal, East Asian Economic Association, vol. 23(1), pages 65-91, March.
    10. repec:dgr:rugccs:199919 is not listed on IDEAS
    11. Ark, Bart van & Timmer, Marcel & Inklaar, Robert, 2002. "The Canada-U.S. manufacturing productivity gap revisited: new ICOP results," GGDC Research Memorandum 200251, Groningen Growth and Development Centre, University of Groningen.
    12. Adam Szirmai, 2011. "Manufacturing and Economic Development," WIDER Working Paper Series wp-2011-075, World Institute for Development Economic Research (UNU-WIDER).
    13. repec:dgr:rugggd:199729 is not listed on IDEAS
    14. Boon Lee, 2011. "Distribution Trade Sector Output and Productivity Performance: A Case Study of Singapore and Hong Kong 2001-2008," School of Economics and Finance Discussion Papers and Working Papers Series 270, School of Economics and Finance, Queensland University of Technology.
    15. repec:dgr:rugggd:200258 is not listed on IDEAS
    16. Lee, Boon L. & Rao, D.S. Prasada & Shepherd, William, 2007. "Comparisons of real output and productivity of Chinese and Indian manufacturing, 1980-2002," Journal of Development Economics, Elsevier, vol. 84(1), pages 378-416, September.
    17. Bart van Ark & Marcel Timmer, 2001. "The ICOP Manufacturing Database: International Comparisons of Productivity Levels," International Productivity Monitor, Centre for the Study of Living Standards, vol. 3, pages 44-51, Fall.
    18. Szirmai, Adam, 2011. "Manufacturing and Economic Development," WIDER Working Paper Series 075, World Institute for Development Economic Research (UNU-WIDER).
    19. Boon Lee, 2002. "Output and Productivity Comparisons of the Wholesale and Retail Trade Sector: US and Australia, 1991 to 1999," School of Economics and Finance Discussion Papers and Working Papers Series 125, School of Economics and Finance, Queensland University of Technology.
    20. Yuan, Tangjun & Fukao, Kyoji & Wu, Harry X., 2010. "Comparative output and labor productivity in manufacturing between China, Japan, Korea and the United States for ca. 1935 - A production-side PPP approach," Explorations in Economic History, Elsevier, vol. 47(3), pages 325-346, July.
    21. Yamfwa, F. & Szirmai, A.S. & Chibwe Lamba, 2002. "Zambian Manufacturing Performance in Comparative Perspective," Working Papers 02.21, Eindhoven Center for Innovation Studies.
    22. Ypma, Gerard, 2007. "Productivity Levels in Transport, Storage and Communication: A New ICOP 1997 Data Set," GGDC Research Memorandum GD-85, Groningen Growth and Development Centre, University of Groningen.
    23. Verspagen, Bart, 2000. "Growth and Structural Change: Trends, Patterns and Policy Options," Research Memorandum 015, Maastricht University, Maastricht Economic Research Institute on Innovation and Technology (MERIT).
    24. repec:dgr:rugggd:200253 is not listed on IDEAS
    25. Michiel VAN Dijk, 2003. "South African Manufacturing Performance In International Perspective 1970–1999," South African Journal of Economics, Economic Society of South Africa, vol. 71(1), pages 119-142, March.
    26. Szirmai, Adam, 2012. "Industrialisation as an engine of growth in developing countries, 1950–2005," Structural Change and Economic Dynamics, Elsevier, vol. 23(4), pages 406-420.
    27. Marcel Timmer & Adam Szirmai, 1999. "Comparative productivity performance in manufacturing in South and East Asia, 1960-93," Oxford Development Studies, Taylor & Francis Journals, vol. 27(1), pages 57-79.

    More about this item

    JEL classification:

    • C43 - Mathematical and Quantitative Methods - - Econometric and Statistical Methods: Special Topics - - - Index Numbers and Aggregation
    • O47 - Economic Development, Innovation, Technological Change, and Growth - - Economic Growth and Aggregate Productivity - - - Empirical Studies of Economic Growth; Aggregate Productivity; Cross-Country Output Convergence
    • O57 - Economic Development, Innovation, Technological Change, and Growth - - Economywide Country Studies - - - Comparative Studies of Countries

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gro:rugggd:200047. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Hanneke Tamling (email available below). General contact details of provider: https://edirc.repec.org/data/ferugnl.html .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.