[go: up one dir, main page]
IDEAS home Printed from https://ideas.repec.org/a/spr/envpol/v17y2015i3p407-429.html
   My bibliography  Save this article

Comparative studies on the driving factors of resource flows in Myanmar, the Philippines, and Bangladesh

Author

Listed:
  • Kyaw Maung
  • Marianne Martinico-Perez
  • Takahiro Komatsu
  • Sujauddin Mohammad
  • Shinsuke Murakami
  • Hiroki Tanikawa
Abstract
This study explores the driving factors of resource consumption patterns in order to identify historical trends in population, affluence, and technology that affect environmental impact reduction through low resource consumption. While such assessments have been conducted in many industrialized countries, similar studies have yet to be conducted in developing countries. This study compares the material flow and accumulation trends of Myanmar, the Philippines, and Bangladesh for three periods spanning 1985–2010. It uses an analytical framework to identify the impacts of human activities on the environment via the following formula: Impact = Population × Affluence × Technology. The Philippines is a newly industrialized country, Bangladesh a resource importer, and Myanmar a primary resource provider and, thus, the fundamental differences in their development and economic structures provide a strong foundation for comparing the driving factors of their resource use. This study finds that efficiency improvement results in reduced resource consumption. This indicates that stronger technology improvement policies are required to mitigate environmental impacts. The capture of real trends from driving factors can ensure that development policies result in a sustainable future for the Asia–Pacific region. Copyright Springer Japan 2015

Suggested Citation

  • Kyaw Maung & Marianne Martinico-Perez & Takahiro Komatsu & Sujauddin Mohammad & Shinsuke Murakami & Hiroki Tanikawa, 2015. "Comparative studies on the driving factors of resource flows in Myanmar, the Philippines, and Bangladesh," Environmental Economics and Policy Studies, Springer;Society for Environmental Economics and Policy Studies - SEEPS, vol. 17(3), pages 407-429, July.
    • Handle: RePEc:spr:envpol:v:17:y:2015:i:3:p:407-429
    DOI: 10.1007/s10018-014-0087-9
    as

    Download full text from publisher

    File URL: http://hdl.handle.net/10.1007/s10018-014-0087-9
    Download Restriction: Access to full text is restricted to subscribers.
    File URL: https://libkey.io/10.1007/s10018-014-0087-9?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Robert U. Ayres & Benjamin Warr, 2009. "The Economic Growth Engine," Books, Edward Elgar Publishing, number 13324.
    2. Helga Weisz & Heinz Schandl, 2008. "Materials Use Across World Regions," Journal of Industrial Ecology, Yale University, vol. 12(5-6), pages 629-636, October.
    3. Ming XU & Tianzhu ZHANG, 2007. "Material Flows and Economic Growth in Developing China," Journal of Industrial Ecology, Yale University, vol. 11(1), pages 121-140, January.
    4. Krausmann, Fridolin & Gingrich, Simone & Eisenmenger, Nina & Erb, Karl-Heinz & Haberl, Helmut & Fischer-Kowalski, Marina, 2009. "Growth in global materials use, GDP and population during the 20th century," Ecological Economics, Elsevier, vol. 68(10), pages 2696-2705, August.
    5. Steinberger, Julia K. & Krausmann, Fridolin & Eisenmenger, Nina, 2010. "Global patterns of materials use: A socioeconomic and geophysical analysis," Ecological Economics, Elsevier, vol. 69(5), pages 1148-1158, March.
    6. Raihan, Selim, 2013. "The Political Economy of Food Price Policy: The Case of Bangladesh," WIDER Working Paper Series 002, World Institute for Development Economic Research (UNU-WIDER).
    7. Kudo, Toshihiro & Mieno, Fumiharu, 2007. "Trade, Foreign Investment and Myanmar's Economic Development during the Transition to an Open Economy," IDE Discussion Papers 116, Institute of Developing Economies, Japan External Trade Organization(JETRO).
    8. West, James & Schandl, Heinz, 2013. "Material use and material efficiency in Latin America and the Caribbean," Ecological Economics, Elsevier, vol. 94(C), pages 19-27.
    9. World Bank, 2011. "Introducing Energy-efficient Clean Technologies in the Brick Sector of Bangladesh," World Bank Publications - Reports 2797, The World Bank Group.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Hossain, Syed Raihan & Ahmed, Istiak & Azad, Ferdous S. & Monjurul Hasan, A S M, 2020. "Empirical investigation of energy management practices in cement industries of Bangladesh," Energy, Elsevier, vol. 212(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Fishman, Tomer & Schandl, Heinz & Tanikawa, Hiroki, 2015. "The socio-economic drivers of material stock accumulation in Japan's prefectures," Ecological Economics, Elsevier, vol. 113(C), pages 76-84.
    2. Marina Fischer-Kowalski & Daniel Hausknost, 2014. "Large-scale Societal Transitions in the Past. WWWforEurope Working Paper No. 55," WIFO Studies, WIFO, number 47187, March.
    3. Lutter, Stephan & Giljum, Stefan & Bruckner, Martin, 2016. "A review and comparative assessment of existing approaches to calculate material footprints," Ecological Economics, Elsevier, vol. 127(C), pages 1-10.
    4. Marco Bianchi & Carlos Tapia & Ikerne del Valle, 2020. "Monitoring domestic material consumption at lower territorial levels: A novel data downscaling method," Journal of Industrial Ecology, Yale University, vol. 24(5), pages 1074-1087, October.
    5. Brand-Correa, Lina I. & Steinberger, Julia K., 2017. "A Framework for Decoupling Human Need Satisfaction From Energy Use," Ecological Economics, Elsevier, vol. 141(C), pages 43-52.
    6. Wendler, Tobias & Töbelmann, Daniel & Günther, Jutta, 2021. "Natural resources and technology - on the mitigating effect of green tech," VfS Annual Conference 2021 (Virtual Conference): Climate Economics 242416, Verein für Socialpolitik / German Economic Association.
    7. Julia K Steinberger & Fridolin Krausmann & Michael Getzner & Heinz Schandl & Jim West, 2013. "Development and Dematerialization: An International Study," PLOS ONE, Public Library of Science, vol. 8(10), pages 1-11, October.
    8. Mathieu, Valentin & Roda, Jean-Marc, 2023. "A meta-analysis on wood trade flow modeling concepts," Forest Policy and Economics, Elsevier, vol. 149(C).
    9. Yoshida, Keisuke & Fishman, Tomer & Okuoka, Keijiro & Tanikawa, Hiroki, 2017. "Material stock's overburden: Automatic spatial detection and estimation of domestic extraction and hidden material flows," Resources, Conservation & Recycling, Elsevier, vol. 123(C), pages 165-175.
    10. Wang, Zhiping & Feng, Chao & Chen, Jinyu & Huang, Jianbai, 2017. "The driving forces of material use in China: An index decomposition analysis," Resources Policy, Elsevier, vol. 52(C), pages 336-348.
    11. Raupova, Ozoda & Kamahara, Hirotsugu & Goto, Naohiro, 2014. "Assessment of physical economy through economy-wide material flow analysis in developing Uzbekistan," Resources, Conservation & Recycling, Elsevier, vol. 89(C), pages 76-85.
    12. Tobias Wendler, 2019. "About the Relationship Between Green Technology and Material Usage," Environmental & Resource Economics, Springer;European Association of Environmental and Resource Economists, vol. 74(3), pages 1383-1423, November.
    13. Latorre, Sara & Farrell, Katharine N. & Martínez-Alier, Joan, 2015. "The commodification of nature and socio-environmental resistance in Ecuador: An inventory of accumulation by dispossession cases, 1980–2013," Ecological Economics, Elsevier, vol. 116(C), pages 58-69.
    14. Stefan Giljum & Monika Dittrich & Mirko Lieber & Stephan Lutter, 2014. "Global Patterns of Material Flows and their Socio-Economic and Environmental Implications: A MFA Study on All Countries World-Wide from 1980 to 2009," Resources, MDPI, vol. 3(1), pages 1-21, March.
    15. Shupa Rahman & Simron Singh & Cameron McCordic, 2022. "Can the Caribbean localize its food system?: Evidence from biomass flow accounting," Journal of Industrial Ecology, Yale University, vol. 26(3), pages 1025-1039, June.
    16. Schaffartzik, Anke & Mayer, Andreas & Eisenmenger, Nina & Krausmann, Fridolin, 2016. "Global patterns of metal extractivism, 1950–2010: Providing the bones for the industrial society's skeleton," Ecological Economics, Elsevier, vol. 122(C), pages 101-110.
    17. Christa Liedtke & Katrin Bienge & Klaus Wiesen & Jens Teubler & Kathrin Greiff & Michael Lettenmeier & Holger Rohn, 2014. "Resource Use in the Production and Consumption System—The MIPS Approach," Resources, MDPI, vol. 3(3), pages 1-31, August.
    18. Kalimeris, Panos & Bithas, Kostas & Richardson, Clive & Nijkamp, Peter, 2020. "Hidden linkages between resources and economy: A “Beyond-GDP” approach using alternative welfare indicators," Ecological Economics, Elsevier, vol. 169(C).
    19. Mayer, Andreas & Haas, Willi & Wiedenhofer, Dominik, 2017. "How Countries' Resource Use History Matters for Human Well-being – An Investigation of Global Patterns in Cumulative Material Flows from 1950 to 2010," Ecological Economics, Elsevier, vol. 134(C), pages 1-10.
    20. Song, Yi & Cheng, Jinhua & Zhang, Yijun & Dai, Tao & Huang, Jianbai, 2021. "Direct and indirect effects of heterogeneous technical change on metal consumption intensity: Evidence from G7 and BRICS countries," Resources Policy, Elsevier, vol. 71(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:spr:envpol:v:17:y:2015:i:3:p:407-429. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.springer.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.