[go: up one dir, main page]
IDEAS home Printed from https://ideas.repec.org/a/gam/jmathe/v10y2022i3p520-d743134.html
   My bibliography  Save this article

A Decision-Making Methodology Based on Expert Systems Applied to Machining Tools Condition Monitoring

Author

Listed:
  • Manuel Casal-Guisande

    (Department of Design in Engineering, University of Vigo, 36208 Vigo, Spain)

  • Alberto Comesaña-Campos

    (Department of Design in Engineering, University of Vigo, 36208 Vigo, Spain)

  • Alejandro Pereira

    (Department of Design in Engineering, University of Vigo, 36208 Vigo, Spain)

  • José-Benito Bouza-Rodríguez

    (Department of Design in Engineering, University of Vigo, 36208 Vigo, Spain)

  • Jorge Cerqueiro-Pequeño

    (Department of Design in Engineering, University of Vigo, 36208 Vigo, Spain)

Abstract
The workers operating and supervising machining tools are often in charge of monitoring a high number of parameters of the machining process, and they usually make use of, among others, cutting sound signals, for following-up and assessing that process. The interpretation of those signals is closely related to the operational conditions of the machine and to the work environment itself, because such signals are sensitive to changes in the process’ input parameters. Additionally, they could be considered as a valid indicator for detecting working conditions that either negatively affect the tools’ lifespan, or might even put the machine operators themselves at risk. In light of those circumstances, this work deals with the proposal and conceptual development of a new methodology for monitoring the work conditions of machining tools, based on expert systems that incorporate a reinforcement strategy into their knowledge base. By means of the combination of sound-processing techniques, together with the use of fuzzy-logic inference engines and hierarchization methods based on vague fuzzy numbers, it will be possible to determine existing undesirable behaviors in the machining tools, thus reducing errors, accidents and harmful failures, with consequent savings in time and costs. Aiming to show the potential for the use of this methodology, a concept test has been developed, implemented in the form of a short case study. The results obtained, even if they require more extensive validation, suggest that the methodology would allow for improving the performance and operation of machining tools, as well as the ergonomic conditions of the workplace.

Suggested Citation

  • Manuel Casal-Guisande & Alberto Comesaña-Campos & Alejandro Pereira & José-Benito Bouza-Rodríguez & Jorge Cerqueiro-Pequeño, 2022. "A Decision-Making Methodology Based on Expert Systems Applied to Machining Tools Condition Monitoring," Mathematics, MDPI, vol. 10(3), pages 1-30, February.
    • Handle: RePEc:gam:jmathe:v:10:y:2022:i:3:p:520-:d:743134
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2227-7390/10/3/520/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2227-7390/10/3/520/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. R. E. Bellman & L. A. Zadeh, 1970. "Decision-Making in a Fuzzy Environment," Management Science, INFORMS, vol. 17(4), pages 141-164, December.
    2. Bonczek, Robert H. & Holsapple, Clyde W. & Whinston, Andrew B., 1981. "Foundations of Decision Support Systems," Elsevier Monographs, Elsevier, edition 1, number 9780121130503 edited by Schmidt, J. William.
    3. Saaty, Thomas L., 1990. "How to make a decision: The analytic hierarchy process," European Journal of Operational Research, Elsevier, vol. 48(1), pages 9-26, September.
    4. Frada Burstein & Clyde Holsapple, 2008. "Handbook on Decision Support Systems 1," International Handbooks on Information Systems, Springer, number 978-3-540-48713-5, November.
    5. Opricovic, Serafim & Tzeng, Gwo-Hshiung, 2004. "Compromise solution by MCDM methods: A comparative analysis of VIKOR and TOPSIS," European Journal of Operational Research, Elsevier, vol. 156(2), pages 445-455, July.
    6. Bertrand Mareschal & Jean Pierre Brans & Philippe Vincke, 1986. "How to select and how to rank projects: the Prométhée method," ULB Institutional Repository 2013/9307, ULB -- Universite Libre de Bruxelles.
    7. Brans, J. P. & Vincke, Ph. & Mareschal, B., 1986. "How to select and how to rank projects: The method," European Journal of Operational Research, Elsevier, vol. 24(2), pages 228-238, February.
    8. Frada Burstein & Clyde Holsapple, 2008. "Handbook on Decision Support Systems 2," International Handbooks on Information Systems, Springer, number 978-3-540-48716-6, November.
    9. Behzadian, Majid & Kazemzadeh, R.B. & Albadvi, A. & Aghdasi, M., 2010. "PROMETHEE: A comprehensive literature review on methodologies and applications," European Journal of Operational Research, Elsevier, vol. 200(1), pages 198-215, January.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Manuel Casal-Guisande & Jorge Cerqueiro-Pequeño & José-Benito Bouza-Rodríguez & Alberto Comesaña-Campos, 2023. "Integration of the Wang & Mendel Algorithm into the Application of Fuzzy Expert Systems to Intelligent Clinical Decision Support Systems," Mathematics, MDPI, vol. 11(11), pages 1-33, May.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Kokaraki, Nikoleta & Hopfe, Christina J. & Robinson, Elaine & Nikolaidou, Elli, 2019. "Testing the reliability of deterministic multi-criteria decision-making methods using building performance simulation," Renewable and Sustainable Energy Reviews, Elsevier, vol. 112(C), pages 991-1007.
    2. Ioannis Sitaridis & Fotis Kitsios, 2020. "Competitiveness analysis and evaluation of entrepreneurial ecosystems: a multi-criteria approach," Annals of Operations Research, Springer, vol. 294(1), pages 377-399, November.
    3. Mahsa Ghandi & Abbas Roozbahani, 2020. "Risk Management of Drinking Water Supply in Critical Conditions Using Fuzzy PROMETHEE V Technique," Water Resources Management: An International Journal, Published for the European Water Resources Association (EWRA), Springer;European Water Resources Association (EWRA), vol. 34(2), pages 595-615, January.
    4. Aikaterini Papapostolou & Charikleia Karakosta & Kalliopi-Anastasia Kourti & Haris Doukas & John Psarras, 2019. "Supporting Europe’s Energy Policy Towards a Decarbonised Energy System: A Comparative Assessment," Sustainability, MDPI, vol. 11(15), pages 1-26, July.
    5. Roman Vavrek, 2019. "Evaluation of the Impact of Selected Weighting Methods on the Results of the TOPSIS Technique," International Journal of Information Technology & Decision Making (IJITDM), World Scientific Publishing Co. Pte. Ltd., vol. 18(06), pages 1821-1843, November.
    6. R. Pelissari & M. C. Oliveira & S. Ben Amor & A. Kandakoglu & A. L. Helleno, 2020. "SMAA methods and their applications: a literature review and future research directions," Annals of Operations Research, Springer, vol. 293(2), pages 433-493, October.
    7. Jorge Cerqueiro-Pequeño & Alberto Comesaña-Campos & Manuel Casal-Guisande & José-Benito Bouza-Rodríguez, 2020. "Design and Development of a New Methodology Based on Expert Systems Applied to the Prevention of Indoor Radon Gas Exposition Risks," IJERPH, MDPI, vol. 18(1), pages 1-32, December.
    8. Barbosa, Ailson de Souza & Shayani, Rafael Amaral & Oliveira, Marco Aurélio Gonçalves de, 2018. "A multi-criteria decision analysis method for regulatory evaluation of electricity distribution service quality," Utilities Policy, Elsevier, vol. 53(C), pages 38-48.
    9. Ateekh Ur Rehman & Syed Hammad Mian & Usama Umer & Yusuf Siraj Usmani, 2019. "Strategic Outcome Using Fuzzy-AHP-Based Decision Approach for Sustainable Manufacturing," Sustainability, MDPI, vol. 11(21), pages 1-22, October.
    10. Misbah Anjum & Vernika Agarwal & P. K. Kapur & Sunil Kumar Khatri, 2020. "Two-phase methodology for prioritization and utility assessment of software vulnerabilities," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 11(2), pages 289-300, July.
    11. Mohammad Nikoo & Nafise Khorramshokouh & Shahryar Monghasemi, 2015. "Optimal Design of Detention Rockfill Dams Using a Simulation-Based Optimization Approach with Mixed Sediment in the Flow," Water Resources Management: An International Journal, Published for the European Water Resources Association (EWRA), Springer;European Water Resources Association (EWRA), vol. 29(15), pages 5469-5488, December.
    12. József Dombi & Tamás Jónás, 2024. "Learning the weights using attribute order information for multi-criteria decision making tasks," OPSEARCH, Springer;Operational Research Society of India, vol. 61(4), pages 2379-2409, December.
    13. Fontana, Veronika & Ebner, Manuel & Schirpke, Uta & Ohndorf, Markus & Pritsch, Hanna & Tappeiner, Ulrike & Kurmayer, Rainer, 2023. "An integrative approach to evaluate ecosystem services of mountain lakes using multi-criteria decision analysis," Ecological Economics, Elsevier, vol. 204(PA).
    14. Kubińska, Elżbieta & Adamczyk-Kowalczuk, Magdalena & Andrzejewski, Mariusz & Rozakis, Stelios, 2022. "Incorporating the status quo effect into the decision making process: The case of municipal companies merger," Socio-Economic Planning Sciences, Elsevier, vol. 84(C).
    15. Rezaei, Jafar, 2015. "Best-worst multi-criteria decision-making method," Omega, Elsevier, vol. 53(C), pages 49-57.
    16. Yi Peng, 2015. "Regional earthquake vulnerability assessment using a combination of MCDM methods," Annals of Operations Research, Springer, vol. 234(1), pages 95-110, November.
    17. Qian-Yun Tan & Cui-Ping Wei & Qi Liu & Xiang-Qian Feng, 2016. "The Hesitant Fuzzy Linguistic TOPSIS Method Based on Novel Information Measures," Asia-Pacific Journal of Operational Research (APJOR), World Scientific Publishing Co. Pte. Ltd., vol. 33(05), pages 1-22, October.
    18. María Pilar de la Cruz López & Juan José Cartelle Barros & Alfredo del Caño Gochi & Manuel Lara Coira, 2021. "New Approach for Managing Sustainability in Projects," Sustainability, MDPI, vol. 13(13), pages 1-27, June.
    19. Marco Rogna, 2019. "A First-Phase Screening Device for Site Selection of Large-Scale Solar Plants with an Application to Italy," BEMPS - Bozen Economics & Management Paper Series BEMPS57, Faculty of Economics and Management at the Free University of Bozen.
    20. Ute Weißfloch & Jutta Geldermann, 2016. "Assessment of product-service systems for increasing the energy efficiency of compressed air systems," European Journal of Industrial Engineering, Inderscience Enterprises Ltd, vol. 10(3), pages 341-366.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jmathe:v:10:y:2022:i:3:p:520-:d:743134. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.