[go: up one dir, main page]
IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v183y2017ipbp394-408.html
   My bibliography  Save this article

Carbon emissions and energy effects on a two-level manufacturer-retailer closed-loop supply chain model with remanufacturing subject to different coordination mechanisms

Author

Listed:
  • Bazan, Ehab
  • Jaber, Mohamad Y.
  • Zanoni, Simone
Abstract
This paper presents two models (classical and VMI-CS coordination) for a two-level closed-loop supply chain with a manufacturer and a retailer with a facility to remanufacture used items. The paper considers three critical environmental issues, which are the energy used in production (manufacturing and remanufacturing) processes, GHG emissions from production and transportation activities (subject to a penalty tax), and the number of times to remanufacture (recover) a used item. Numerical results show that the traditional optimization approach, which minimises the sum of inventory related costs, suggested less remanufacturing, fewer recovery times and more GHG emissions and energy usage; a result of operating at high production rates. The VMI-CS model was shown to be more economical than the classical model for a wide range of manufacturing rates, but not necessarily a more environmentally responsible choice. An extensive numerical analysis was conducted to enrich the discussion and to draw some managerial insights on how to make environmentally conscious decisions.

Suggested Citation

  • Bazan, Ehab & Jaber, Mohamad Y. & Zanoni, Simone, 2017. "Carbon emissions and energy effects on a two-level manufacturer-retailer closed-loop supply chain model with remanufacturing subject to different coordination mechanisms," International Journal of Production Economics, Elsevier, vol. 183(PB), pages 394-408.
    • Handle: RePEc:eee:proeco:v:183:y:2017:i:pb:p:394-408
    DOI: 10.1016/j.ijpe.2016.07.009
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925527316301542
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ijpe.2016.07.009?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. El Saadany, Ahmed M.A. & Jaber, Mohamad Y. & Bonney, Maurice, 2013. "How many times to remanufacture?," International Journal of Production Economics, Elsevier, vol. 143(2), pages 598-604.
    2. Andriolo, Alessandro & Battini, Daria & Grubbström, Robert W. & Persona, Alessandro & Sgarbossa, Fabio, 2014. "A century of evolution from Harris׳s basic lot size model: Survey and research agenda," International Journal of Production Economics, Elsevier, vol. 155(C), pages 16-38.
    3. Biel, K. & Glock, C. H., 2014. "On the use of waste energy in a two-stage production system with controllable production rates," Publications of Darmstadt Technical University, Institute for Business Studies (BWL) 66459, Darmstadt Technical University, Department of Business Administration, Economics and Law, Institute for Business Studies (BWL).
    4. Bonney, Maurice & Jaber, Mohamad Y., 2014. "Deriving research agendas for manufacturing and logistics systems: A methodology," International Journal of Production Economics, Elsevier, vol. 157(C), pages 49-61.
    5. Jaber, M.Y. & Goyal, S.K., 2008. "Coordinating a three-level supply chain with multiple suppliers, a vendor and multiple buyers," International Journal of Production Economics, Elsevier, vol. 116(1), pages 95-103, November.
    6. Zanoni, Simone & Bettoni, Laura & Glock, Christoph H., 2014. "Energy implications in a two-stage production system with controllable production rates," International Journal of Production Economics, Elsevier, vol. 149(C), pages 164-171.
    7. Glock, C. H., 2012. "The joint economic lot size problem: a review," Publications of Darmstadt Technical University, Institute for Business Studies (BWL) 57811, Darmstadt Technical University, Department of Business Administration, Economics and Law, Institute for Business Studies (BWL).
    8. Maxim A Bushuev & Alfred Guiffrida & M. Y. Jaber & Mehmood Khan, 2015. "A review of inventory lot sizing review papers," Management Research Review, Emerald Group Publishing Limited, vol. 38(3), pages 283-298, March.
    9. Glock, Christoph H., 2012. "The joint economic lot size problem: A review," International Journal of Production Economics, Elsevier, vol. 135(2), pages 671-686.
    10. Bozorgi, Ali & Pazour, Jennifer & Nazzal, Dima, 2014. "A new inventory model for cold items that considers costs and emissions," International Journal of Production Economics, Elsevier, vol. 155(C), pages 114-125.
    11. Sarkis, Joseph & Zhu, Qinghua & Lai, Kee-hung, 2011. "An organizational theoretic review of green supply chain management literature," International Journal of Production Economics, Elsevier, vol. 130(1), pages 1-15, March.
    12. Glock, C. H. & Kim, T., 2012. "A joint economic lot sizemodel with returnable transport items," Publications of Darmstadt Technical University, Institute for Business Studies (BWL) 59079, Darmstadt Technical University, Department of Business Administration, Economics and Law, Institute for Business Studies (BWL).
    13. Bonney, Maurice & Jaber, Mohamad Y., 2011. "Environmentally responsible inventory models: Non-classical models for a non-classical era," International Journal of Production Economics, Elsevier, vol. 133(1), pages 43-53, September.
    14. de Brito, M.P. & Dekker, R., 2003. "A Framework for Reverse Logistics," ERIM Report Series Research in Management ERS-2003-045-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.
    15. Govindan, Kannan & Soleimani, Hamed & Kannan, Devika, 2015. "Reverse logistics and closed-loop supply chain: A comprehensive review to explore the future," European Journal of Operational Research, Elsevier, vol. 240(3), pages 603-626.
    16. Glock, C. H. & Jaber, M. Y. & El Saadany, A., 2013. "Supply Chain Coordination with Emission Reduction Incentives," Publications of Darmstadt Technical University, Institute for Business Studies (BWL) 57672, Darmstadt Technical University, Department of Business Administration, Economics and Law, Institute for Business Studies (BWL).
    17. El Saadany, Ahmed M.A. & Jaber, Mohamad Y., 2011. "A production/remanufacture model with returns' subassemblies managed differently," International Journal of Production Economics, Elsevier, vol. 133(1), pages 119-126, September.
    18. V. Daniel R. Guide & Luk N. Van Wassenhove, 2009. "OR FORUM---The Evolution of Closed-Loop Supply Chain Research," Operations Research, INFORMS, vol. 57(1), pages 10-18, February.
    19. Zanoni, S. & Bettoni, L. & Glock, C. H., 2014. "Energy Implications in a Two-Stage Production System with Controllable Production Rates," Publications of Darmstadt Technical University, Institute for Business Studies (BWL) 62117, Darmstadt Technical University, Department of Business Administration, Economics and Law, Institute for Business Studies (BWL).
    20. Brandenburg, Marcus & Govindan, Kannan & Sarkis, Joseph & Seuring, Stefan, 2014. "Quantitative models for sustainable supply chain management: Developments and directions," European Journal of Operational Research, Elsevier, vol. 233(2), pages 299-312.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Glock, Christoph H. & Grosse, Eric H., 2021. "The impact of controllable production rates on the performance of inventory systems: A systematic review of the literature," European Journal of Operational Research, Elsevier, vol. 288(3), pages 703-720.
    2. Jawad, Hussam & Jaber, Mohamad Y. & Nuwayhid, Rida Y., 2018. "Improving supply chain sustainability using exergy analysis," European Journal of Operational Research, Elsevier, vol. 269(1), pages 258-271.
    3. Lucio Enrico Zavanella & Beatrice Marchi & Simone Zanoni & Ivan Ferretti, 2019. "Energy considerations for the economic production quantity and the joint economic lot sizing," Journal of Business Economics, Springer, vol. 89(7), pages 845-865, September.
    4. Castellano, Davide & Gallo, Mosè & Grassi, Andrea & Santillo, Liberatina C., 2019. "The effect of GHG emissions on production, inventory replenishment and routing decisions in a single vendor-multiple buyers supply chain," International Journal of Production Economics, Elsevier, vol. 218(C), pages 30-42.
    5. Daryanto, Yosef & Wee, Hui Ming & Astanti, Ririn Diar, 2019. "Three-echelon supply chain model considering carbon emission and item deterioration," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 122(C), pages 368-383.
    6. Dhahri, Akrem & Gharbi, Ali & Ouhimmou, Mustapha, 2022. "Integrated production-delivery control policy for an unreliable manufacturing system and multiple retailers," International Journal of Production Economics, Elsevier, vol. 245(C).
    7. Vahid Reza Soleymanfar & Ahmad Makui & Ata Allah Taleizadeh & Reza Tavakkoli-Moghaddam, 2022. "Sustainable EOQ and EPQ models for a two-echelon multi-product supply chain with return policy," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 24(4), pages 5317-5343, April.
    8. Beck, Fabian G. & Glock, Christoph H. & Kim, Taebok, 2017. "Coordination of a production network with a single buyer and multiple vendors with geometrically increasing batch shipments," International Journal of Production Economics, Elsevier, vol. 193(C), pages 633-646.
    9. Konur, Dinçer, 2017. "Non-collaborative emission targets joining and quantity flow decisions in a Stackelberg setting," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 105(C), pages 60-82.
    10. Chan, Chi Kin & Fang, Fei & Langevin, André, 2018. "Single-vendor multi-buyer supply chain coordination with stochastic demand," International Journal of Production Economics, Elsevier, vol. 206(C), pages 110-133.
    11. Beullens, Patrick, 2014. "Revisiting foundations in lot sizing—Connections between Harris, Crowther, Monahan, and Clark," International Journal of Production Economics, Elsevier, vol. 155(C), pages 68-81.
    12. Wu, Kan & Yuan, Xue-Ming, 2016. "Optimal production-inventory policy for an integrated multi-stage supply chain with time-varying demandAuthor-Name: Zhao, Shi Tao," European Journal of Operational Research, Elsevier, vol. 255(2), pages 364-379.
    13. Andriolo, Alessandro & Battini, Daria & Grubbström, Robert W. & Persona, Alessandro & Sgarbossa, Fabio, 2014. "A century of evolution from Harris׳s basic lot size model: Survey and research agenda," International Journal of Production Economics, Elsevier, vol. 155(C), pages 16-38.
    14. Lucas Dias Condeixa & Pierry Silva & Diego Moah & Brenda Farias & Adriana Leiras, 2022. "Evaluating cost impacts on reverse logistics using an Economic Order Quantity (EOQ) model with environmental and social considerations," Central European Journal of Operations Research, Springer;Slovak Society for Operations Research;Hungarian Operational Research Society;Czech Society for Operations Research;Österr. Gesellschaft für Operations Research (ÖGOR);Slovenian Society Informatika - Section for Operational Research;Croatian Operational Research Society, vol. 30(3), pages 921-940, September.
    15. Kim, Taebok & Glock, Christoph H., 2018. "Production planning for a two-stage production system with multiple parallel machines and variable production rates," International Journal of Production Economics, Elsevier, vol. 196(C), pages 284-292.
    16. Yosef Daryanto & Hui Ming Wee & Gede Agus Widyadana, 2019. "Low Carbon Supply Chain Coordination for Imperfect Quality Deteriorating Items," Mathematics, MDPI, vol. 7(3), pages 1-24, March.
    17. Mostafa Parsa & Ali Shahandeh Nookabadi & Zümbül Atan & Yaser Malekian, 2022. "An optimal inventory policy for a multi-echelon closed-loop supply chain of postconsumer recycled content products," Operational Research, Springer, vol. 22(3), pages 1887-1938, July.
    18. Bazan, Ehab & Jaber, Mohamad Y. & Zanoni, Simone & Zavanella, Lucio E., 2014. "Vendor Managed Inventory (VMI) with Consignment Stock (CS) agreement for a two-level supply chain with an imperfect production process with/without restoration interruptions," International Journal of Production Economics, Elsevier, vol. 157(C), pages 289-301.
    19. Glock, Christoph H. & Grosse, Eric H. & Ries, Jörg M., 2017. "Reprint of “Decision support models for supplier development: Systematic literature review and research agenda”," International Journal of Production Economics, Elsevier, vol. 194(C), pages 246-260.
    20. Tarhini, Hussein & Karam, Mario & Jaber, Mohamad Y., 2020. "An integrated single-vendor multi-buyer production inventory model with transshipments between buyers," International Journal of Production Economics, Elsevier, vol. 225(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:183:y:2017:i:pb:p:394-408. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.