[go: up one dir, main page]
IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v133y2011i1p423-431.html
   My bibliography  Save this article

Estimating obsolescence risk from demand data to enhance inventory control--A case study

Author

Listed:
  • van Jaarsveld, Willem
  • Dekker, Rommert
Abstract
In this paper obsolescence of service parts is analyzed in a practical environment. Based on the analysis, we propose a method that can be used to estimate the risk of obsolescence of service parts, which is subsequently used to enhance inventory control for those parts. The method distinguishes groups of service parts. For these groups, the risk of obsolescence is estimated using the behavior of similar groups of service parts in the past. The method uses demand data as main information source, and can therefore be applied without the use of an expert's opinion. We will give numerical values for the risk of obsolescence obtained with the method, and the effects of these values on inventory control will be examined.

Suggested Citation

  • van Jaarsveld, Willem & Dekker, Rommert, 2011. "Estimating obsolescence risk from demand data to enhance inventory control--A case study," International Journal of Production Economics, Elsevier, vol. 133(1), pages 423-431, September.
    • Handle: RePEc:eee:proeco:v:133:y:2011:i:1:p:423-431
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925527310002227
    Download Restriction: Full text for ScienceDirect subscribers only
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Hill, Roger M. & Omar, Mohd & Smith, David K., 1999. "Stock replenishment policies for a stochastic exponentially-declining demand process," European Journal of Operational Research, Elsevier, vol. 116(2), pages 374-388, July.
    2. Teunter, Ruud H. & Fortuin, Leonard, 1999. "End-of-life service," International Journal of Production Economics, Elsevier, vol. 59(1-3), pages 487-497, March.
    3. J P J van Kooten & T Tan, 2009. "The final order problem for repairable spare parts under condemnation," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 60(10), pages 1449-1461, October.
    4. Jing-Sheng Song & Paul Zipkin, 1993. "Inventory Control in a Fluctuating Demand Environment," Operations Research, INFORMS, vol. 41(2), pages 351-370, April.
    5. Teunter, Ruud H. & Klein Haneveld, Willem K., 2002. "Inventory control of service parts in the final phase," European Journal of Operational Research, Elsevier, vol. 137(3), pages 497-511, March.
    6. Ritchie, E. & Wilcox, P., 1977. "Renewal theory forecasting for stock control," European Journal of Operational Research, Elsevier, vol. 1(2), pages 90-93, March.
    7. Jing-Sheng Song & Paul H. Zipkin, 1996. "Managing Inventory with the Prospect of Obsolescence," Operations Research, INFORMS, vol. 44(1), pages 215-222, February.
    8. Song, Yuyue & Lau, Hoong Chuin, 2004. "A periodic-review inventory model with application to the continuous-review obsolescence problem," European Journal of Operational Research, Elsevier, vol. 159(1), pages 110-120, November.
    9. George W. Brown & John Y. Lu & Robert J. Wolfson, 1964. "Dynamic Modeling of Inventories Subject to Obsolescence," Management Science, INFORMS, vol. 11(1), pages 51-63, September.
    10. Pinçe, C. & Dekker, R., 2010. "A Continuous Review Inventory Model with Advance Policy Change and Obsolescence," Econometric Institute Research Papers EI 2009-45, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    11. Cattani, Kyle D. & Souza, Gilvan C., 2003. "Good buy? Delaying end-of-life purchases," European Journal of Operational Research, Elsevier, vol. 146(1), pages 216-228, April.
    12. John R. Moore, Jr., 1971. "Forecasting and Scheduling for Past-Model Replacement Parts," Management Science, INFORMS, vol. 18(4-Part-I), pages 200-213, December.
    13. Cobbaert, Koen & Van Oudheusden, Dirk, 1996. "Inventory models for fast moving spare parts subject to "sudden death" obsolescence," International Journal of Production Economics, Elsevier, vol. 44(3), pages 239-248, July.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Hekimoğlu, Mustafa & Karlı, Deniz, 2023. "Modeling repair demand in existence of a nonstationary installed base," International Journal of Production Economics, Elsevier, vol. 263(C).
    2. Moon, Seongmin & Hicks, Christian & Simpson, Andrew, 2012. "The development of a hierarchical forecasting method for predicting spare parts demand in the South Korean Navy—A case study," International Journal of Production Economics, Elsevier, vol. 140(2), pages 794-802.
    3. Zhu, Sha & Jaarsveld, Willem van & Dekker, Rommert, 2020. "Spare parts inventory control based on maintenance planning," Reliability Engineering and System Safety, Elsevier, vol. 193(C).
    4. Pinçe, Çerağ & Turrini, Laura & Meissner, Joern, 2021. "Intermittent demand forecasting for spare parts: A Critical review," Omega, Elsevier, vol. 105(C).
    5. Zhu, Sha & van Jaarsveld, Willem & Dekker, Rommert, 2022. "Critical project planning and spare parts inventory management in shutdown maintenance," Reliability Engineering and System Safety, Elsevier, vol. 219(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Behfard, S. & Al Hanbali, A. & van der Heijden, M.C. & Zijm, W.H.M., 2018. "Last Time Buy and repair decisions for fast moving parts," International Journal of Production Economics, Elsevier, vol. 197(C), pages 158-173.
    2. Pourakbar, Morteza & Dekker, Rommert, 2012. "Customer differentiated end-of-life inventory problem," European Journal of Operational Research, Elsevier, vol. 222(1), pages 44-53.
    3. van Jaarsveld, W.L., 2010. "Estimating obsolescence risk from demand data - a case study," Econometric Institute Research Papers EI 2010-03, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    4. J. B. G. Frenk & Sonya Javadi & Semih O. Sezer, 2019. "An optimal stopping approach for the end-of-life inventory problem," Mathematical Methods of Operations Research, Springer;Gesellschaft für Operations Research (GOR);Nederlands Genootschap voor Besliskunde (NGB), vol. 90(3), pages 329-363, December.
    5. J P J van Kooten & T Tan, 2009. "The final order problem for repairable spare parts under condemnation," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 60(10), pages 1449-1461, October.
    6. Pinçe, Çerag & Dekker, Rommert, 2011. "An inventory model for slow moving items subject to obsolescence," European Journal of Operational Research, Elsevier, vol. 213(1), pages 83-95, August.
    7. Hur, Mansik & Keskin, Burcu B. & Schmidt, Charles P., 2018. "End-of-life inventory control of aircraft spare parts under performance based logistics," International Journal of Production Economics, Elsevier, vol. 204(C), pages 186-203.
    8. Behfard, S. & van der Heijden, M.C. & Al Hanbali, A. & Zijm, W.H.M., 2015. "Last time buy and repair decisions for spare parts," European Journal of Operational Research, Elsevier, vol. 244(2), pages 498-510.
    9. Ozyoruk, Emin & Erkip, Nesim Kohen & Ararat, Çağın, 2022. "End-of-life inventory management problem: Results and insights," International Journal of Production Economics, Elsevier, vol. 243(C).
    10. Pourakbar, M. & Frenk, J.B.G. & Dekker, R., 2010. "End-of-Life Inventory Decisions for Consumer Electronics Service Parts," Econometric Institute Research Papers EI 2009-48, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    11. Frenk, J.B.G. & Javadi, S. & Pourakbar, M. & Sezer, S.O., 2019. "An exact static solution approach for the service parts end-of-life inventory problem," European Journal of Operational Research, Elsevier, vol. 272(2), pages 496-504.
    12. J. B. G. Frenk & Canan Pehlivan & Semih O. Sezer, 2019. "Order and exit decisions under non-increasing price curves for products with short life cycles," Mathematical Methods of Operations Research, Springer;Gesellschaft für Operations Research (GOR);Nederlands Genootschap voor Besliskunde (NGB), vol. 90(3), pages 365-397, December.
    13. M. Pourakbar & E. Laan & R. Dekker, 2014. "End-of-Life Inventory Problem with Phaseout Returns," Production and Operations Management, Production and Operations Management Society, vol. 23(9), pages 1561-1576, September.
    14. Opher Baron & Oded Berman & David Perry, 2010. "Continuous review inventory models for perishable items ordered in batches," Mathematical Methods of Operations Research, Springer;Gesellschaft für Operations Research (GOR);Nederlands Genootschap voor Besliskunde (NGB), vol. 72(2), pages 217-247, October.
    15. Karl Inderfurth & Rainer Kleber, 2010. "An Advanced Heuristic for Multiple-Option Spare Parts Procurement after End-of-Production," FEMM Working Papers 100005, Otto-von-Guericke University Magdeburg, Faculty of Economics and Management.
    16. Fleischhacker, Adam J. & Zhao, Yao, 2011. "Planning for demand failure: A dynamic lot size model for clinical trial supply chains," European Journal of Operational Research, Elsevier, vol. 211(3), pages 496-506, June.
    17. Shen, Yuelin & Willems, Sean P., 2014. "Modeling sourcing strategies to mitigate part obsolescence," European Journal of Operational Research, Elsevier, vol. 236(2), pages 522-533.
    18. Hu, Qiwei & Boylan, John E. & Chen, Huijing & Labib, Ashraf, 2018. "OR in spare parts management: A review," European Journal of Operational Research, Elsevier, vol. 266(2), pages 395-414.
    19. Song, Yuyue & Lau, Hoong Chuin, 2004. "A periodic-review inventory model with application to the continuous-review obsolescence problem," European Journal of Operational Research, Elsevier, vol. 159(1), pages 110-120, November.
    20. Van der Auweraer, Sarah & Boute, Robert N. & Syntetos, Aris A., 2019. "Forecasting spare part demand with installed base information: A review," International Journal of Forecasting, Elsevier, vol. 35(1), pages 181-196.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:133:y:2011:i:1:p:423-431. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.