[go: up one dir, main page]
IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v180y2019icp873-880.html
   My bibliography  Save this article

Thermal behavior of polyethylene glycol based phase change materials for thermal energy storage with multiwall carbon nanotubes additives

Author

Listed:
  • Wang, Chaoming
  • Chen, Ke
  • Huang, Jun
  • Cai, Zhengyu
  • Hu, Zhanjiang
  • Wang, Tingjun
Abstract
A series of nanocomposite phase change materials (PCMs) were prepared by dispersing sodium dodecyl sulfate (SDS) functionalized multiwall carbon nanotubes (MWCNTs) in liquid polyethylene glycol 8000 (PEG8000) with various mass fraction loadings (0, 0.5, 1, 2, and 5%). The effects of functionalized MWCNTs on form-stability, and thermal behaviors, such as latent heat, thermal stability, thermal reliability, thermal conductivity, and thermal storage/release rate, of PEG8000 were investigated experimentally. The results showed that the melting peak temperatures and latent heat of melting of the nanocomposite PCMs decreased slightly from 63.9 to 61.9 °C and 165 to 150 J/g when the mass fraction of functionalized MWCNTs increased from 0 to 5% gradually. The nanocomposite PCM showed excellent form-stability with 2% MWCNTs loading even when the temperature was about 36 °C (100 °C) higher than the melting peak temperature of pure PEG8000 (63.9 °C). In addition, the thermal conductivities of nanocomposite PCMs were increased from 0.295 to 0.531W m-1 K−1 progressively by adding 0.5 wt% to 5 wt% MWCNTs, respectively. Moreover, the thermal performance tests indicated that the thermal storage and release rates of the as-prepared nanocomposite PCMs increased due to the addition of small amount of MWCNTs. The PEG8000/MWCNTs nanocomposite PCMs showed a proper thermal behavior for thermal energy storage applications.

Suggested Citation

  • Wang, Chaoming & Chen, Ke & Huang, Jun & Cai, Zhengyu & Hu, Zhanjiang & Wang, Tingjun, 2019. "Thermal behavior of polyethylene glycol based phase change materials for thermal energy storage with multiwall carbon nanotubes additives," Energy, Elsevier, vol. 180(C), pages 873-880.
    • Handle: RePEc:eee:energy:v:180:y:2019:i:c:p:873-880
    DOI: 10.1016/j.energy.2019.05.163
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S036054421931045X
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2019.05.163?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Li, Chuanchang & Xie, Baoshan & Chen, Deliang & Chen, Jian & Li, Wei & Chen, Zhongsheng & Gibb, Stuart W. & Long, Yi, 2019. "Ultrathin graphite sheets stabilized stearic acid as a composite phase change material for thermal energy storage," Energy, Elsevier, vol. 166(C), pages 246-255.
    2. Liu, Huan & Wang, Xiaodong & Wu, Dezhen & Ji, Shengfu, 2019. "Morphology-controlled synthesis of microencapsulated phase change materials with TiO2 shell for thermal energy harvesting and temperature regulation," Energy, Elsevier, vol. 172(C), pages 599-617.
    3. Li, TingXian & Lee, Ju-Hyuk & Wang, RuZhu & Kang, Yong Tae, 2013. "Enhancement of heat transfer for thermal energy storage application using stearic acid nanocomposite with multi-walled carbon nanotubes," Energy, Elsevier, vol. 55(C), pages 752-761.
    4. Zhai, X.Q. & Wang, X.L. & Wang, T. & Wang, R.Z., 2013. "A review on phase change cold storage in air-conditioning system: Materials and applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 22(C), pages 108-120.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Paul, John & Pandey, A.K. & Mishra, Yogeshwar Nath & Said, Zafar & Mishra, Yogendra Kumar & Ma, Zhenjun & Jacob, Jeeja & Kadirgama, K. & Samykano, M. & Tyagi, V.V., 2022. "Nano-enhanced organic form stable PCMs for medium temperature solar thermal energy harvesting: Recent progresses, challenges, and opportunities," Renewable and Sustainable Energy Reviews, Elsevier, vol. 161(C).
    2. Dubey, Abhayjeet kumar & Sun, Jingyi & Choudhary, Tushar & Dash, Madhusmita & Rakshit, Dibakar & Ansari, M Zahid & Ramakrishna, Seeram & Liu, Yong & Nanda, Himansu Sekhar, 2023. "Emerging phase change materials with improved thermal efficiency for a clean and sustainable environment: An approach towards net zero," Renewable and Sustainable Energy Reviews, Elsevier, vol. 182(C).
    3. Wang, Jin & Yu, Kai & Duan, Runze & Xie, Gongnan & Sundén, Bengt, 2021. "Enhanced thermal management by introducing nanoparticle composite phase change materials for cooling multiple heat sources systems," Energy, Elsevier, vol. 227(C).
    4. Cheng, Jiaji & Niu, Shaoshuai & Kang, Moyun & Liu, Yuqi & Zhang, Feng & Qu, Wenjuan & Guan, Yu & Li, Shaoxiang, 2022. "The thermal behavior and flame retardant performance of phase change material microcapsules with modified carbon nanotubes," Energy, Elsevier, vol. 240(C).
    5. Atinafu, Dimberu G. & Wi, Seunghwan & Yun, Beom Yeol & Kim, Sumin, 2021. "Engineering biochar with multiwalled carbon nanotube for efficient phase change material encapsulation and thermal energy storage," Energy, Elsevier, vol. 216(C).
    6. Chinnasamy, Veerakumar & Heo, Jaehyeok & Jung, Sungyong & Lee, Hoseong & Cho, Honghyun, 2023. "Shape stabilized phase change materials based on different support structures for thermal energy storage applications–A review," Energy, Elsevier, vol. 262(PB).
    7. Mishra, Amit Kumar & Lahiri, B.B. & Philip, John, 2020. "Carbon black nano particle loaded lauric acid-based form-stable phase change material with enhanced thermal conductivity and photo-thermal conversion for thermal energy storage," Energy, Elsevier, vol. 191(C).
    8. Li, Jiayin & Hu, Xiaowu & Zhang, Chuge & Luo, Wenxing & Jiang, Xiongxin, 2021. "Enhanced thermal performance of phase-change materials supported by mesoporous silica modified with polydopamine/nano-metal particles for thermal energy storage," Renewable Energy, Elsevier, vol. 178(C), pages 118-127.
    9. Quan, Bingqing & Wang, Jinzhi & Li, Yi & Sui, Miao & Xie, Heng & Liu, Zhigang & Wu, Hao & Lu, Xiang & Tong, Yi, 2023. "Cellulose nanofibrous/MXene aerogel encapsulated phase change composites with excellent thermal energy conversion and storage capacity," Energy, Elsevier, vol. 262(PB).
    10. Sarı, Ahmet & Hekimoğlu, Gökhan & Karabayır, Yasemin & Sharma, R.K. & Arslanoğlu, Hasan & Gencel, Osman & Tyagi, V.V., 2022. "Capric-stearic acid mixture impregnated carbonized waste sugar beet pulp as leak-resistive composite phase change material with effective thermal conductivity and thermal energy storage performance," Energy, Elsevier, vol. 247(C).
    11. Qiu, Lin & Yan, Kening & Feng, Yanhui & Liu, Xianglei, 2023. "Nano additives-enhanced PEG /AlN composites with high cycle stability to improve thermal and heat storage properties," Energy, Elsevier, vol. 278(C).
    12. Jiang, Liang & Lei, Yuan & Liu, Qinfeng & Lei, Jingxin, 2020. "Polyethylene glycol based self-luminous phase change materials for both thermal and light energy storage," Energy, Elsevier, vol. 193(C).
    13. Sarı, Ahmet & Hekimoğlu, Gökhan & Tyagi, V.V. & Sharma, R.K., 2020. "Evaluation of pumice for development of low-cost and energy-efficient composite phase change materials and lab-scale thermoregulation performances of its cementitious plasters," Energy, Elsevier, vol. 207(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Paul, John & Pandey, A.K. & Mishra, Yogeshwar Nath & Said, Zafar & Mishra, Yogendra Kumar & Ma, Zhenjun & Jacob, Jeeja & Kadirgama, K. & Samykano, M. & Tyagi, V.V., 2022. "Nano-enhanced organic form stable PCMs for medium temperature solar thermal energy harvesting: Recent progresses, challenges, and opportunities," Renewable and Sustainable Energy Reviews, Elsevier, vol. 161(C).
    2. Chen, Guijun & Su, Yunpeng & Jiang, Dongyue & Pan, Lujun & Li, Shuai, 2020. "An experimental and numerical investigation on a paraffin wax/graphene oxide/carbon nanotubes composite material for solar thermal storage applications," Applied Energy, Elsevier, vol. 264(C).
    3. Zhang, Xialan & Lin, Qilang & Luo, Huijun & Luo, Shiyuan, 2020. "Three-dimensional graphitic hierarchical porous carbon/stearic acid composite as shape-stabilized phase change material for thermal energy storage," Applied Energy, Elsevier, vol. 260(C).
    4. Rajendran Prabakaran & Shaji Sidney & Dhasan Mohan Lal & C. Selvam & Sivasankaran Harish, 2019. "Solidification of Graphene-Assisted Phase Change Nanocomposites inside a Sphere for Cold Storage Applications," Energies, MDPI, vol. 12(18), pages 1-16, September.
    5. Zhang, Nan & Yuan, Yanping & Du, Yanxia & Cao, Xiaoling & Yuan, Yaguang, 2014. "Preparation and properties of palmitic-stearic acid eutectic mixture/expanded graphite composite as phase change material for energy storage," Energy, Elsevier, vol. 78(C), pages 950-956.
    6. Tao, Y.B. & He, Ya-Ling, 2018. "A review of phase change material and performance enhancement method for latent heat storage system," Renewable and Sustainable Energy Reviews, Elsevier, vol. 93(C), pages 245-259.
    7. Liang, Yuntao & Wang, Ting & He, Zhenglong & Sun, Yong & Song, Shuanglin & Cui, Xinfeng & Cao, Yingjiazi, 2023. "High thermal storage capacity phase change microcapsules for heat transfer enhancement through hydroxylated-silanized nano-silicon carbide," Energy, Elsevier, vol. 285(C).
    8. Cheng, Xiwen & Zhai, Xiaoqiang, 2018. "Thermal performance analysis and optimization of a cascaded packed bed cool thermal energy storage unit using multiple phase change materials," Applied Energy, Elsevier, vol. 215(C), pages 566-576.
    9. Yue, Gentian & Wang, Lei & Zhang, Xin'an & Wu, Jihuai & Jiang, Qiwei & Zhang, Weifeng & Huang, Miaoliang & Lin, Jianming, 2014. "Fabrication of high performance multi-walled carbon nanotubes/polypyrrole counter electrode for dye-sensitized solar cells," Energy, Elsevier, vol. 67(C), pages 460-467.
    10. He, Tianbiao & Chong, Zheng Rong & Zheng, Junjie & Ju, Yonglin & Linga, Praveen, 2019. "LNG cold energy utilization: Prospects and challenges," Energy, Elsevier, vol. 170(C), pages 557-568.
    11. Yang, Haiyue & Wang, Yazhou & Yu, Qianqian & Cao, Guoliang & Sun, Xiaohan & Yang, Rue & Zhang, Qiong & Liu, Feng & Di, Xin & Li, Jian & Wang, Chengyu & Li, Guoliang, 2018. "Low-cost, three-dimension, high thermal conductivity, carbonized wood-based composite phase change materials for thermal energy storage," Energy, Elsevier, vol. 159(C), pages 929-936.
    12. Zhang, Guozhu & Cao, Ziming & Xiao, Suguang & Guo, Yimu & Li, Chenglin, 2022. "A promising technology of cold energy storage using phase change materials to cool tunnels with geothermal hazards," Renewable and Sustainable Energy Reviews, Elsevier, vol. 163(C).
    13. Amaral, C. & Vicente, R. & Marques, P.A.A.P. & Barros-Timmons, A., 2017. "Phase change materials and carbon nanostructures for thermal energy storage: A literature review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 79(C), pages 1212-1228.
    14. Zhang, Ya & Liu, Huan & Niu, Jinfei & Wang, Xiaodong & Wu, Dezhen, 2020. "Development of reversible and durable thermochromic phase-change microcapsules for real-time indication of thermal energy storage and management," Applied Energy, Elsevier, vol. 264(C).
    15. Amin, N.A.M. & Belusko, M. & Bruno, F., 2014. "An effectiveness-NTU model of a packed bed PCM thermal storage system," Applied Energy, Elsevier, vol. 134(C), pages 356-362.
    16. Wang, Huiru & Liu, Zhenyu & Wu, Huiying, 2017. "Entransy dissipation-based thermal resistance optimization of slab LHTES system with multiple PCMs arranged in a 2D array," Energy, Elsevier, vol. 138(C), pages 739-751.
    17. Gao, Huan & Bing, Naici & Xie, Huaqing & Yu, Wei, 2022. "Energy harvesting and storage blocks based on 3D oriented expanded graphite and stearic acid with high thermal conductivity for solar thermal application," Energy, Elsevier, vol. 254(PA).
    18. Ibrahim, Nasiru I. & Al-Sulaiman, Fahad A. & Rahman, Saidur & Yilbas, Bekir S. & Sahin, Ahmet Z., 2017. "Heat transfer enhancement of phase change materials for thermal energy storage applications: A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 74(C), pages 26-50.
    19. Tao, Y.B. & Carey, V.P., 2016. "Effects of PCM thermophysical properties on thermal storage performance of a shell-and-tube latent heat storage unit," Applied Energy, Elsevier, vol. 179(C), pages 203-210.
    20. Zhang, P. & Xiao, X. & Ma, Z.W., 2016. "A review of the composite phase change materials: Fabrication, characterization, mathematical modeling and application to performance enhancement," Applied Energy, Elsevier, vol. 165(C), pages 472-510.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:180:y:2019:i:c:p:873-880. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.