[go: up one dir, main page]
IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v91y2015icp350-362.html
   My bibliography  Save this article

Production of waste energy and heat in hospital facilities

Author

Listed:
  • Bujak, Janusz Wojciech
Abstract
Highly efficient utilization of the energy potential of waste is a crucial matter in the process of thermal conversion. A vast majority of research studies published to this date on electrical energy and heat recovery have been concerned with large MSW (municipal solid waste) incineration systems. Only few of the publications presented the research on electrical energy and heat recovery in small and medium incinerating plants. They were focused on the production of syngas (waste gasification) and its combustion in gas engines. The research studies described in the article included electrical energy and heat recovery from the medical waste incineration installation with the efficiency of 220 kg/h. The research was carried out in a large hospital facility. The tested installation consisted of three basic elements: HSRG (heat recovery steam generator), MT (microturbine) producing electrical energy and steam/water heat exchanger. The efficiency values of individual units were high: HRSG–78%, MT-79% and HT-99%. The total disposable enthalpy flux of steam entering the turbine was low and it was not possible to produce a sufficient amount of electricity. The average electrical energy flux produced during the tests amounted to Ėue-MT = 31.6 kWe, which constituted 4.2% of the total flux of usable energy recovered by the installation. The rest was the enthalpy flux of hot water – Ėue-HE = 729 kW (95.8%). Such installations can be used, provided that there are systems that are capable of receiving that type of heat throughout the entire calendar year. It was proven that the experimental installation had small impact on the environment. The SPB (simple payback period) of the investment expenditures incurred in order to complete the installation amounted to 3.1 years.

Suggested Citation

  • Bujak, Janusz Wojciech, 2015. "Production of waste energy and heat in hospital facilities," Energy, Elsevier, vol. 91(C), pages 350-362.
    • Handle: RePEc:eee:energy:v:91:y:2015:i:c:p:350-362
    DOI: 10.1016/j.energy.2015.08.053
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544215011287
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2015.08.053?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Murphy, J.D. & McKeogh, E., 2004. "Technical, economic and environmental analysis of energy production from municipal solid waste," Renewable Energy, Elsevier, vol. 29(7), pages 1043-1057.
    2. Arena, Umberto & Di Gregorio, Fabrizio, 2014. "Energy generation by air gasification of two industrial plastic wastes in a pilot scale fluidized bed reactor," Energy, Elsevier, vol. 68(C), pages 735-743.
    3. Li, A.M & Li, X.D & Li, S.Q & Ren, Y & Shang, N & Chi, Y & Yan, J.H & Cen, K.F, 1999. "Experimental studies on municipal solid waste pyrolysis in a laboratory-scale rotary kiln," Energy, Elsevier, vol. 24(3), pages 209-218.
    4. Mani, M. & Nagarajan, G. & Sampath, S., 2011. "Characterisation and effect of using waste plastic oil and diesel fuel blends in compression ignition engine," Energy, Elsevier, vol. 36(1), pages 212-219.
    5. Poma, Christian & Verda, Vittorio & Consonni, Stefano, 2010. "Design and performance evaluation of a waste-to-energy plant integrated with a combined cycle," Energy, Elsevier, vol. 35(2), pages 786-793.
    6. Wallman, P.H & Thorsness, C.B & Winter, J.D, 1998. "Hydrogen production from wastes," Energy, Elsevier, vol. 23(4), pages 271-278.
    7. Insa, E. & Zamorano, M. & López, R., 2010. "Critical review of medical waste legislation in Spain," Resources, Conservation & Recycling, Elsevier, vol. 54(12), pages 1048-1059.
    8. Nixon, J.D. & Dey, P.K. & Ghosh, S.K. & Davies, P.A., 2013. "Evaluation of options for energy recovery from municipal solid waste in India using the hierarchical analytical network process," Energy, Elsevier, vol. 59(C), pages 215-223.
    9. Münster, Marie & Meibom, Peter, 2011. "Optimization of use of waste in the future energy system," Energy, Elsevier, vol. 36(3), pages 1612-1622.
    10. Mori, Yasuhumi & Kikegawa, Yukihiro & Uchida, Hiroyuki, 2007. "A model for detailed evaluation of fossil-energy saving by utilizing unused but possible energy-sources on a city scale," Applied Energy, Elsevier, vol. 84(9), pages 921-935, September.
    11. Lee, Jung Soo & Kim, Sang Done, 1996. "Gasification kinetics of waste tire-char with CO2 in a thermobalance reactor," Energy, Elsevier, vol. 21(5), pages 343-352.
    12. Tabasová, Andrea & Kropáč, Jiří & Kermes, Vít & Nemet, Andreja & Stehlík, Petr, 2012. "Waste-to-energy technologies: Impact on environment," Energy, Elsevier, vol. 44(1), pages 146-155.
    13. Bujak, J., 2009. "Experimental study of the energy efficiency of an incinerator for medical waste," Applied Energy, Elsevier, vol. 86(11), pages 2386-2393, November.
    14. Di Gregorio, F. & Zaccariello, Lucio, 2012. "Fluidized bed gasification of a packaging derived fuel: energetic, environmental and economic performances comparison for waste-to-energy plants," Energy, Elsevier, vol. 42(1), pages 331-341.
    15. Chiarioni, A. & Reverberi, A.P. & Fabiano, B. & Dovì, V.G., 2006. "An improved model of an ASR pyrolysis reactor for energy recovery," Energy, Elsevier, vol. 31(13), pages 2460-2468.
    16. Mani, M. & Nagarajan, G., 2009. "Influence of injection timing on performance, emission and combustion characteristics of a DI diesel engine running on waste plastic oil," Energy, Elsevier, vol. 34(10), pages 1617-1623.
    17. Miranda, Miguel & Cabrita, I. & Pinto, Filomena & Gulyurtlu, I., 2013. "Mixtures of rubber tyre and plastic wastes pyrolysis: A kinetic study," Energy, Elsevier, vol. 58(C), pages 270-282.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Klemeš, Jiří Jaromír & Fan, Yee Van & Jiang, Peng, 2020. "The energy and environmental footprints of COVID-19 fighting measures – PPE, disinfection, supply chains," Energy, Elsevier, vol. 211(C).
    2. Rosa Francesca De Masi & Nicoletta Del Regno & Antonio Gigante & Silvia Ruggiero & Alessandro Russo & Francesco Tariello & Giuseppe Peter Vanoli, 2023. "The Importance of Investing in the Energy Refurbishment of Hospitals: Results of a Case Study in a Mediterranean Climate," Sustainability, MDPI, vol. 15(14), pages 1-20, July.
    3. Ruan, Jujun & Huang, Zhe & Huang, Jiaxin & Yuan, Zhihui & Huang, Mingzhi & Du, Changming & Zhang, Tao & Qiu, Rongliang, 2018. "A novel pneumatic separator for separating diode and CD capacitance of waste printed circuit boards," Energy, Elsevier, vol. 142(C), pages 191-195.
    4. Janusz Bujak & Piotr Sitarz & Rafał Pasela, 2021. "Possibilities for Reducing CO and TOC Emissions in Thermal Waste Treatment Plants: A Case Study," Energies, MDPI, vol. 14(10), pages 1-11, May.
    5. Konečná, Eva & Teng, Sin Yong & Máša, Vítězslav, 2020. "New insights into the potential of the gas microturbine in microgrids and industrial applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 134(C).
    6. Małgorzata Cygańska & Magdalena Kludacz-Alessandri, 2021. "Determinants of Electrical and Thermal Energy Consumption in Hospitals According to Climate Zones in Poland," Energies, MDPI, vol. 14(22), pages 1-24, November.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Bujak, Janusz Wojciech, 2015. "Heat recovery from thermal treatment of medical waste," Energy, Elsevier, vol. 90(P2), pages 1721-1732.
    2. Bujak, Janusz Wojciech, 2015. "Thermal utilization (treatment) of plastic waste," Energy, Elsevier, vol. 90(P2), pages 1468-1477.
    3. Miranda, Miguel & Cabrita, I. & Pinto, Filomena & Gulyurtlu, I., 2013. "Mixtures of rubber tyre and plastic wastes pyrolysis: A kinetic study," Energy, Elsevier, vol. 58(C), pages 270-282.
    4. Sri Devi Kumari, T. & Jebaraj, Adriel J.J. & Raj, T. Antony & Jeyakumar, D. & Kumar, T. Prem, 2016. "A kish graphitic lithium-insertion anode material obtained from non-biodegradable plastic waste," Energy, Elsevier, vol. 95(C), pages 483-493.
    5. Balcazar, Juan Galvarino Cerda & Dias, Rubens Alves & Balestieri, José Antonio Perrella, 2013. "Analysis of hybrid waste-to-energy for medium-sized cities," Energy, Elsevier, vol. 55(C), pages 728-741.
    6. Das, Amar Kumar & Hansdah, Dulari & Panda, Achyut Kumar, 2021. "Thermal balancing and exergetic performance evaluation of a compression ignition engine fuelled with waste plastic pyrolytic oil and different fuel additives," Energy, Elsevier, vol. 229(C).
    7. Hossein Nami & Amjad Anvari-Moghaddam & Ahmad Arabkoohsar & Amir Reza Razmi, 2020. "4E Analyses of a Hybrid Waste-Driven CHP–ORC Plant with Flue Gas Condensation," Sustainability, MDPI, vol. 12(22), pages 1-21, November.
    8. Georgios Giakoumakis & Dorothea Politi & Dimitrios Sidiras, 2021. "Medical Waste Treatment Technologies for Energy, Fuels, and Materials Production: A Review," Energies, MDPI, vol. 14(23), pages 1-30, December.
    9. Das, Amar Kumar & Sahu, Santosh Kumar & Panda, Achyut Kumar, 2022. "Current status and prospects of alternate liquid transportation fuels in compression ignition engines: A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 161(C).
    10. Milutinović, Biljana & Stefanović, Gordana & Dassisti, Michele & Marković, Danijel & Vučković, Goran, 2014. "Multi-criteria analysis as a tool for sustainability assessment of a waste management model," Energy, Elsevier, vol. 74(C), pages 190-201.
    11. Ardolino, Filomena & Lodato, Concetta & Astrup, Thomas F. & Arena, Umberto, 2018. "Energy recovery from plastic and biomass waste by means of fluidized bed gasification: A life cycle inventory model," Energy, Elsevier, vol. 165(PB), pages 299-314.
    12. Di Maria, Francesco & Sisani, Federico & Contini, Stefano, 2018. "Are EU waste-to-energy technologies effective for exploiting the energy in bio-waste?," Applied Energy, Elsevier, vol. 230(C), pages 1557-1572.
    13. Inayat, Muddasser & Sulaiman, Shaharin A. & Kurnia, Jundika Candra & Shahbaz, Muhammad, 2019. "Effect of various blended fuels on syngas quality and performance in catalytic co-gasification: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 105(C), pages 252-267.
    14. Herlander Mata-Lima & Deborah Wollmann Silva & Deborah Cristina Nardi & Samanta Andrize Klering & Thays Car Feliciano de Oliveira & Fernando Morgado-Dias, 2021. "Waste-to-Energy: An Opportunity to Increase Renewable Energy Share and Reduce Ecological Footprint in Small Island Developing States (SIDS)," Energies, MDPI, vol. 14(22), pages 1-20, November.
    15. Mancarella, Pierluigi, 2014. "MES (multi-energy systems): An overview of concepts and evaluation models," Energy, Elsevier, vol. 65(C), pages 1-17.
    16. Lopez, Gartzen & Artetxe, Maite & Amutio, Maider & Bilbao, Javier & Olazar, Martin, 2017. "Thermochemical routes for the valorization of waste polyolefinic plastics to produce fuels and chemicals. A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 346-368.
    17. Kalargaris, Ioannis & Tian, Guohong & Gu, Sai, 2017. "The utilisation of oils produced from plastic waste at different pyrolysis temperatures in a DI diesel engine," Energy, Elsevier, vol. 131(C), pages 179-185.
    18. Heena Panchasara & Nanjappa Ashwath, 2021. "Effects of Pyrolysis Bio-Oils on Fuel Atomisation—A Review," Energies, MDPI, vol. 14(4), pages 1-22, February.
    19. Konstantinos Petridis & Prasanta Kumar Dey, 2018. "Measuring incineration plants’ performance using combined data envelopment analysis, goal programming and mixed integer linear programming," Annals of Operations Research, Springer, vol. 267(1), pages 467-491, August.
    20. Rezaei, Mahdi & Ghobadian, Barat & Samadi, Seyed Hashem & Karimi, Samira, 2018. "Electric power generation from municipal solid waste: A techno-economical assessment under different scenarios in Iran," Energy, Elsevier, vol. 152(C), pages 46-56.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:91:y:2015:i:c:p:350-362. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.