[go: up one dir, main page]
IDEAS home Printed from https://ideas.repec.org/a/zib/zjmerd/v42y2019i3p24-29.html
   My bibliography  Save this article

Development Of Effective Technology Of Deep Water Treatment From Suspended Solid Particles For Formation Pressure Maintenance At The Oil Fields

Author

Listed:
  • Dayrabay Zh. Abdeli

    (Department of Petroleum Engineering, Kazakh National Research Technical University named after K.I. Satpayev, 050013, 22a Satpayev Str., Almaty, Republic of Kazakhstan)

  • Wisup Bae

    (Department of Mineral and Resources Engineering, Sejong University, 143-747(05006), 209 Neungdong-ro, Gwangjin-gu, Seoul, South Korea)

  • Assel B. Seiden

    (Department of Petroleum Engineering, Kazakh National Research Technical University named after K.I. Satpayev, 050013, 22a Satpayev Str., Almaty, Republic of Kazakhstan)

  • Adi Novriansyah

    (Department of Mineral and Resources Engineering, Sejong University, 143-747(05006), 209 Neungdong-ro, Gwangjin-gu, Seoul, South Korea)

Abstract
Using for example Uzen oil and gas field, this article explores the peculiarities of oil production at fields located at the middle and late stages of development. Particular attention is paid to the need to pump water into the reservoir to maintain reservoir pressure. The main methods of purification of oilfield wastewater are considered. The Uzen field was analyzed in detail, the requirements for water quality to maintain reservoir pressure, as well as presented results of monitoring of solids and oil products in the injected water of the Uzen field. According to the injected reservoir water data at the Uzen field, we have built a projection model that takes into account the content of mechanical additions. The tests made in the reservoir of wastewater pumped at Uzen formation proposed experimental setup for water purification to maintain reservoir pressure. Experiments on water purification showed significant results.

Suggested Citation

  • Dayrabay Zh. Abdeli & Wisup Bae & Assel B. Seiden & Adi Novriansyah, 2019. "Development Of Effective Technology Of Deep Water Treatment From Suspended Solid Particles For Formation Pressure Maintenance At The Oil Fields," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(3), pages 24-29, March.
    • Handle: RePEc:zib:zjmerd:v:42:y:2019:i:3:p:24-29
    DOI: 10.26480/jmerd.03.2019.24.29
    as

    Download full text from publisher

    File URL: https://jmerd.org.my/download/3111/
    Download Restriction: no
    File URL: https://libkey.io/10.26480/jmerd.03.2019.24.29?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. Ahmed Abugalia & Mohamed Shaglouf, 2018. "Analysis Of Different Models Of Moa Surge Arrester For The Transformer Protection," Acta Mechanica Malaysia (AMM), Zibeline International Publishing, vol. 1(2), pages 19-21, July.
    2. Zhonghua Yan, 2018. "Modeling And Kinematics Simulation Of Plane Ten-Bar Mechanism Of Warp Knitting Machine Based On Simcape/Multibody," Acta Mechanica Malaysia (AMM), Zibeline International Publishing, vol. 1(2), pages 15-18, January.
    3. Shahajada Mahmudul Hasan & Shahed Hasan Khan Tushar & Md. Hafizur Rahman & Anisur Rahman Shimu, 2019. "An Optimized Design Of Electromagnet And Float For A Magnetic Suspension System," Acta Electronica Malaysia (AEM), Zibeline International Publishing, vol. 3(1), pages 14-18, January.
    4. Alizah Ali & Tan Luck LEE & Ng Khar Thoe & Noraini Ismail & Siti Zarikh Sofiah Abu Bakar, 2019. "Transforming Pu blic Libraries Into Digital Knowledge Dissemination Centre In Supporting Lifelong Blended Learning Programmes For Rural Youths," Acta Informatica Malaysia (AIM), Zibeline International Publishing, vol. 3(1), pages 16-20, February.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Van Vang Le & Lan Huong Nguyen, 2019. "Design And Fabrication Of Distillation Equipment Of Fresh Water From The Seawater By The Use Of The Waste Heat From Diesel Engines," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(2), pages 79-83, March.
    2. Tran Thi Thanh Van & Tran Ngoc Thanh & Phạm Ngoc Vuong & Nguyen Duong Nam, 2019. "Calculation Of Cylindrical Products Made Of Composite Materials Using Wrap Technology," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(2), pages 76-78, March.
    3. Vu Anh Tuan & Nguyen Duong Nam & Pham Ngoc Vuong & Mai Van Thi & Pham Mai Khanh, 2019. "Influence Of Nickel On The Microstructure And Mechanical Properties Of Aluminum Copper Alloy," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(2), pages 84-86, March.
    4. Van Viet Pham, 2019. "Correlation Of Overall Heat Transfer Coefficient In The Three Zones Of Wire And Tube Condenser," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(2), pages 87-97, March.
    5. Hoang Thi Ngoc Quyen & Nguyen Hong Hai & Vu Viet Quyen & Nguyen Van Bach & Nguyen Duong Nam, 2019. "Study On The Breakdown Of Milling Balls Made Of 13%Cr White Cast-Iron Working In Strong Abrasive And Clash Conditions," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(2), pages 98-100, March.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:zib:zjmerd:v:42:y:2019:i:3:p:24-29. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Zibeline International Publishing (email available below). General contact details of provider: https://jmerd.org.my/ .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.