[go: up one dir, main page]
IDEAS home Printed from https://ideas.repec.org/a/zib/zjmerd/v42y2019i3p06-09.html
   My bibliography  Save this article

Drop Test Simulation of Glass Fiber Reinforced Plastic (GFRP) Modular Pontoon Unit

Author

Listed:
  • Nikolay E. Razinkin

    (Department of Technology of Transport Processes, Institute of Applied Technologies, Russian University of Transport, 14 Kuchin Lane, Moscow, Russian Federation)

  • Nina I. Voronova

    (Department of Technology of Transport Processes, Institute of Applied Technologies, Russian University of Transport, 14 Kuchin Lane, Moscow, Russian Federation)

  • Yaroslav D. Podlesnikov

    (Department of Technology of Transport Processes, Institute of Applied Technologies, Russian University of Transport, 14 Kuchin Lane, Moscow, Russian Federation)

  • Sergey N. Danilov

    (Department of Technology of Transport Processes, Institute of Applied Technologies, Russian University of Transport, 14 Kuchin Lane, Moscow, Russian Federation)

Abstract
The importance of the problem under study is related to the need to solve a number of problems arising with the formation of long-freight trains. The purpose of the article is to analyze various brake systems of wagons of various lengths. The primary method for studying this problem is modeling, which permits to consider this problem. The article presents the results of studies of gas-dynamic processes taking place in the brake line of the train during braking, as well as the results of calculations of the instantaneous values of forces in the automatic coupling devices of rolling stock in the train during braking. The study results can be used to analyze the formation schemes of freight trains, especially long-base ones, and developing a new design of a freight-type air distributor.

Suggested Citation

  • Nikolay E. Razinkin & Nina I. Voronova & Yaroslav D. Podlesnikov & Sergey N. Danilov, 2019. "Drop Test Simulation of Glass Fiber Reinforced Plastic (GFRP) Modular Pontoon Unit," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(3), pages 06-09, March.
    • Handle: RePEc:zib:zjmerd:v:42:y:2019:i:3:p:06-09
    DOI: 10.26480/jmerd.03.2019.06.09
    as

    Download full text from publisher

    File URL: https://jmerd.org.my/download/3103/
    Download Restriction: no
    File URL: https://libkey.io/10.26480/jmerd.03.2019.06.09?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. Jugal Kishor Gupta & S.K. Gupta, 2019. "A Comparative Study Of Crowd Counting And Profiling Through Visual And Non-Visual Sensors," Acta Informatica Malaysia (AIM), Zibeline International Publishing, vol. 3(1), pages 4-6, January.
    2. Luo Xu, 2018. "Study on PC Continuous Girder mechanical properties Based on Tendon Tensioning Pattern," Acta Mechanica Malaysia (AMM), Zibeline International Publishing, vol. 1(1), pages 8-11, February.
    3. Rohit Rana & Rajendra Kumar, 2019. "Performance Analysis Of Aodv In Presence Of Malicious Node," Acta Electronica Malaysia (AEM), Zibeline International Publishing, vol. 3(1), pages 1-5, January.
    4. Luo Xu, 2018. "Static Characteristic Analysis of Concrete-filled Steel Tube Tied arch bridge," Acta Mechanica Malaysia (AMM), Zibeline International Publishing, vol. 1(1), pages 12-15, February.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Vu Anh Tuan & Nguyen Duong Nam & Pham Ngoc Vuong & Mai Van Thi & Pham Mai Khanh, 2019. "Influence Of Nickel On The Microstructure And Mechanical Properties Of Aluminum Copper Alloy," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(2), pages 84-86, March.
    2. Luo Xu, 2018. "Study on PC Continuous Girder mechanical properties Based on Tendon Tensioning Pattern," Acta Mechanica Malaysia (AMM), Zibeline International Publishing, vol. 1(1), pages 8-11, February.
    3. Gaurav Sharma & Anil Kumar Kapil, 2021. "Intrusion Detection And Prevention Framework Using Data Mining Techniques For Financial Sector," Acta Informatica Malaysia (AIM), Zibeline International Publishing, vol. 5(2), pages 58-61, December.
    4. Agarwal A. & Seretse O.M. & Letsatsi M.T. & Maele L.T. & Koketso D., 2019. "Performance Evolution Of An Improved Solar Thermal Hot Air Heating System For Drying Ground-Nut," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(3), pages 01-05, March.
    5. Luo Xu, 2018. "Static Characteristic Analysis of Concrete-filled Steel Tube Tied arch bridge," Acta Mechanica Malaysia (AMM), Zibeline International Publishing, vol. 1(1), pages 12-15, February.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:zib:zjmerd:v:42:y:2019:i:3:p:06-09. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Zibeline International Publishing (email available below). General contact details of provider: https://jmerd.org.my/ .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.