[go: up one dir, main page]
IDEAS home Printed from https://ideas.repec.org/a/eee/jomega/v28y2000i2p195-213.html
   My bibliography  Save this article

Towards a taxonomy of search patterns of manufacturing flexibility in small and medium-sized firms

Author

Listed:
  • Braglia, Marcello
  • Petroni, Alberto
Abstract
Manufacturing organizations are experiencing a wide range of forces which make it necessary for them to continuously adapt their operations and consider the consequences of their production activities on customer expectations, supplier constraints and changes in the law. This paper presents an empirical verification of knowledge levels and the perceived strategic relevance of manufacturing flexibility. A questionnaire survey was conducted with a sample of 89 manufacturing firms located in the area around Brescia, one of the most industrialized areas in Europe. Initial results gave a better understanding of which type of flexibility is preferred when facing different environmental challenges. In addition, insights into managerial approaches were brought out through clustering and discriminant analysis which have made it possible to emphasize some significant differences between firms in the search patterns of manufacturing flexibility.

Suggested Citation

  • Braglia, Marcello & Petroni, Alberto, 2000. "Towards a taxonomy of search patterns of manufacturing flexibility in small and medium-sized firms," Omega, Elsevier, vol. 28(2), pages 195-213, April.
    • Handle: RePEc:eee:jomega:v:28:y:2000:i:2:p:195-213
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0305-0483(99)00044-4
    Download Restriction: Full text for ScienceDirect subscribers only
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Fernando F. Suarez & Michael A. Cusumano & Charles H. Fine, 1996. "An Empirical Study of Manufacturing Flexibility in Printed Circuit Board Assembly," Operations Research, INFORMS, vol. 44(1), pages 223-240, February.
    2. Boyer, Kenneth K. & Leong, G. Keong, 1996. "Manufacturing flexibility at the plant level," Omega, Elsevier, vol. 24(5), pages 495-510, October.
    3. Paul M. Swamidass & William T. Newell, 1987. "Manufacturing Strategy, Environmental Uncertainty and Performance: A Path Analytic Model," Management Science, INFORMS, vol. 33(4), pages 509-524, April.
    4. Donald Gerwin, 1993. "Manufacturing Flexibility: A Strategic Perspective," Management Science, INFORMS, vol. 39(4), pages 395-410, April.
    5. Gupta, Yash P. & Goyal, Sameer, 1989. "Flexibility of manufacturing systems: Concepts and measurements," European Journal of Operational Research, Elsevier, vol. 43(2), pages 119-135, November.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Gong, Zhejun & Hu, Sun, 2008. "An economic evaluation model of product mix flexibility," Omega, Elsevier, vol. 36(5), pages 852-864, October.
    2. Chang, Shih-Chia & Yang, Chen-Lung & Cheng, Hsin-Chia & Sheu, Chwen, 2003. "Manufacturing flexibility and business strategy: An empirical study of small and medium sized firms," International Journal of Production Economics, Elsevier, vol. 83(1), pages 13-26, January.
    3. Amoako-Gyampah, Kwasi, 2003. "The relationships among selected business environment factors and manufacturing strategy: insights from an emerging economy," Omega, Elsevier, vol. 31(4), pages 287-301, August.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Hallgren, Mattias & Olhager, Jan, 2009. "Flexibility configurations: Empirical analysis of volume and product mix flexibility," Omega, Elsevier, vol. 37(4), pages 746-756, August.
    2. Thomé, Antonio Márcio T. & Scavarda, Luiz Felipe & Pires, Sílvio R.I. & Ceryno, Paula & Klingebiel, Katja, 2014. "A multi-tier study on supply chain flexibility in the automotive industry," International Journal of Production Economics, Elsevier, vol. 158(C), pages 91-105.
    3. Elena Katok & William Tarantino & Terry P. Harrison, 2003. "Investment in production resource flexibility: An empirical investigation of methods for planning under uncertainty," Naval Research Logistics (NRL), John Wiley & Sons, vol. 50(2), pages 105-129, March.
    4. Chang, Shih-Chia & Yang, Chen-Lung & Cheng, Hsin-Chia & Sheu, Chwen, 2003. "Manufacturing flexibility and business strategy: An empirical study of small and medium sized firms," International Journal of Production Economics, Elsevier, vol. 83(1), pages 13-26, January.
    5. Yu, Kangkang & Cadeaux, Jack & Luo, Ben Nanfeng, 2015. "Operational flexibility: Review and meta-analysis," International Journal of Production Economics, Elsevier, vol. 169(C), pages 190-202.
    6. Mohamed Mahjoub Dhiaf & Abdellatif Benabdelhafid & Fakher Jaoua, 2012. "Supply Chain Flexibility And Balanced Scorecard: Conceptual Model And Empirical Study In Tunisian Companies Launched Upgrading Program," Polish Journal of Management Studies, Czestochowa Technical University, Department of Management, vol. 5(1), pages 34-59, June.
    7. Borenstein, Denis, 2000. "A directed acyclic graph representation of routing manufacturing flexibility," European Journal of Operational Research, Elsevier, vol. 127(1), pages 78-93, November.
    8. Allam Yousuf & Hossam Haddad & Miklos Pakurar & Serhii Kozlovskyi & Anastasiia Mohylova & Oksana Shlapak & Felfoldi Janos, 2019. "The Effect of Operational Flexibility on Performance: A Field Study on Small and Medium-sized Industrial Companies in Jordan," Montenegrin Journal of Economics, Economic Laboratory for Transition Research (ELIT), vol. 15(1), pages 47-60.
    9. Tachizawa, Elcio M. & Gimenez, Cristina, 2010. "Supply flexibility strategies in Spanish firms: Results from a survey," International Journal of Production Economics, Elsevier, vol. 124(1), pages 214-224, March.
    10. Larry J. Menor & M. Murat Kristal & Eve D. Rosenzweig, 2007. "Examining the Influence of Operational Intellectual Capital on Capabilities and Performance," Manufacturing & Service Operations Management, INFORMS, vol. 9(4), pages 559-578, May.
    11. Pradeep Kumar & Sasadhar Bera & Tanusree Dutta & Shibashish Chakraborty, 2018. "Auxiliary Flexibility in Healthcare Delivery System: An Integrative Framework and Implications," Global Journal of Flexible Systems Management, Springer;Global Institute of Flexible Systems Management, vol. 19(2), pages 173-186, June.
    12. Marta Pérez Pérez & Ana María Serrano Bedia & María Concepción López Fernández, 2016. "A review of manufacturing flexibility: systematising the concept," International Journal of Production Research, Taylor & Francis Journals, vol. 54(10), pages 3133-3148, May.
    13. Beach, R. & Muhlemann, A. P. & Price, D. H. R. & Paterson, A. & Sharp, J. A., 2000. "A review of manufacturing flexibility," European Journal of Operational Research, Elsevier, vol. 122(1), pages 41-57, April.
    14. Gong, Zhejun & Hu, Sun, 2008. "An economic evaluation model of product mix flexibility," Omega, Elsevier, vol. 36(5), pages 852-864, October.
    15. Enrique, Daisy Valle & Lerman, Laura Visintainer & Sousa, Paulo Renato de & Benitez, Guilherme Brittes & Bigares Charrua Santos, Fernando M. & Frank, Alejandro G., 2022. "Being digital and flexible to navigate the storm: How digital transformation enhances supply chain flexibility in turbulent environments," International Journal of Production Economics, Elsevier, vol. 250(C).
    16. Yang, L. & Ng, C.T. & Cheng, T.C.E., 2011. "Optimal production strategy under demand fluctuations: Technology versus capacity," European Journal of Operational Research, Elsevier, vol. 214(2), pages 393-402, October.
    17. Enrico Teich & Thorsten Claus, 2017. "Measurement of Load and Capacity Flexibility in Manufacturing," Global Journal of Flexible Systems Management, Springer;Global Institute of Flexible Systems Management, vol. 18(4), pages 291-302, December.
    18. Moshfique Uddin & Anup Chowdhury & Geoffrey Wood, 2022. "The resilience of the British and European goods industry: Challenge of Brexit," Industrial and Corporate Change, Oxford University Press and the Associazione ICC, vol. 31(4), pages 934-954.
    19. Dangayach, G.S. & Deshmukh, S.G., 2006. "An exploratory study of manufacturing strategy practices of machinery manufacturing companies in India," Omega, Elsevier, vol. 34(3), pages 254-273, June.
    20. Fazal Haleem & Muhammad Jehangir & Asia Baig, 2017. "Operations Strategy Practices of SMEs," Global Economics Review, Humanity Only, vol. 2(1), pages 12-23, December.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:jomega:v:28:y:2000:i:2:p:195-213. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/375/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.