⇁ HARPOON 2

This is a deprecated and all future changes will be to the branch harpoon2.

Harpoon 2

STATUS: Merging into mainline April 20th or June 9th (nice)

---

Legacy Harpoon README

Harpoon

Getting you where you want with the fewest keystrokes.

-- image provided by Bob Rust

⇁ WIP

This is not fully baked, though used by several people. If you experience any issues, see some improvement you think would be amazing, or just have some feedback for harpoon (or me), make an issue!

⇁ The Problems:

1. You're working on a codebase. medium, large, tiny, whatever. You find yourself frequenting a small set of files and you are tired of using a fuzzy finder, :bnext & :bprev are getting too repetitive, alternate file doesn't quite cut it, etc etc.
2. You want to execute some project specific commands or have any number of persistent terminals that can be easily navigated to.

⇁ The Solutions:

1. The ability to specify, or on the fly, mark and create persisting key strokes to go to the files you want.
2. Unlimited terminals and navigation.

⇁ Installation

• neovim 0.5.0+ required
• install using your favorite plugin manager (vim-plug in this example)

Plug 'nvim-lua/plenary.nvim' " don't forget to add this one if you don't have it yet!
Plug 'ThePrimeagen/harpoon'

• install using lazy.nvim

{
    "ThePrimeagen/harpoon",  branch = "harpoon2",
    dependencies = { "nvim-lua/plenary.nvim" }
}

⇁ Harpooning

here we'll explain how to wield the power of the harpoon:

Marks

you mark files you want to revisit later on

:lua require("harpoon.mark").add_file()

File Navigation

view all project marks with:

:lua require("harpoon.ui").toggle_quick_menu()

you can go up and down the list, enter, delete or reorder. q and <ESC> exit and save the menu

you also can switch to any mark without bringing up the menu, use the below with the desired mark index

:lua require("harpoon.ui").nav_file(3)                  -- navigates to file 3

you can also cycle the list in both directions

:lua require("harpoon.ui").nav_next()                   -- navigates to next mark
:lua require("harpoon.ui").nav_prev()                   -- navigates to previous mark

from the quickmenu, open a file in: a vertical split with control+v, a horizontal split with control+x, a new tab with control+t

Terminal Navigation

this works like file navigation except that if there is no terminal at the specified index a new terminal is created.

lua require("harpoon.term").gotoTerminal(1)             -- navigates to term 1

Commands to Terminals

commands can be sent to any terminal

lua require("harpoon.term").sendCommand(1, "ls -La")    -- sends ls -La to tmux window 1

further more commands can be stored for later quick

lua require('harpoon.cmd-ui').toggle_quick_menu()       -- shows the commands menu
lua require("harpoon.term").sendCommand(1, 1)           -- sends command 1 to term 1

Tmux Support

tmux is supported out of the box and can be used as a drop-in replacement to normal terminals by simply switching 'term' with 'tmux' like so

lua require("harpoon.tmux").gotoTerminal(1)             -- goes to the first tmux window
lua require("harpoon.tmux").sendCommand(1, "ls -La")    -- sends ls -La to tmux window 1
lua require("harpoon.tmux").sendCommand(1, 1)           -- sends command 1 to tmux window 1

sendCommand and goToTerminal also accept any valid tmux pane identifier.

lua require("harpoon.tmux").gotoTerminal("{down-of}")   -- focus the pane directly below
lua require("harpoon.tmux").sendCommand("%3", "ls")     -- send a command to the pane with id '%3'

Once you switch to a tmux window you can always switch back to neovim, this is a little bash script that will switch to the window which is running neovim.

In your tmux.conf (or anywhere you have keybinds), add this

bind-key -r G run-shell "path-to-harpoon/harpoon/scripts/tmux/switch-back-to-nvim"

Telescope Support

1st register harpoon as a telescope extension

require("telescope").load_extension('harpoon')

currently only marks are supported in telescope

:Telescope harpoon marks

⇁ Configuration

if configuring harpoon is desired it must be done through harpoons setup function

require("harpoon").setup({ ... })

Global Settings

here are all the available global settings with their default values

global_settings = {
    -- sets the marks upon calling `toggle` on the ui, instead of require `:w`.
    save_on_toggle = false,

    -- saves the harpoon file upon every change. disabling is unrecommended.
    save_on_change = true,

    -- sets harpoon to run the command immediately as it's passed to the terminal when calling `sendCommand`.
    enter_on_sendcmd = false,

    -- closes any tmux windows harpoon that harpoon creates when you close Neovim.
    tmux_autoclose_windows = false,

    -- filetypes that you want to prevent from adding to the harpoon list menu.
    excluded_filetypes = { "harpoon" },

    -- set marks specific to each git branch inside git repository
    mark_branch = false,

    -- enable tabline with harpoon marks
    tabline = false,
    tabline_prefix = "   ",
    tabline_suffix = "   ",
}

Preconfigured Terminal Commands

to preconfigure terminal commands for later use

projects = {
    -- Yes $HOME works
    ["$HOME/personal/vim-with-me/server"] = {
        term = {
            cmds = {
                "./env && npx ts-node src/index.ts"
            }
        }
    }
}

⇁ Logging

• logs are written to harpoon.log within the nvim cache path (:echo stdpath("cache"))
• available log levels are trace, debug, info, warn, error, or fatal. warn is default
• log level can be set with vim.g.harpoon_log_level (must be before setup())
• launching nvim with HARPOON_LOG=debug nvim takes precedence over vim.g.harpoon_log_level.
• invalid values default back to warn.

⇁ Others

How do Harpoon marks differ from vim global marks

they serve a similar purpose however harpoon marks differ in a few key ways:

1. They auto update their position within the file
2. They are saved per project.
3. They can be hand edited vs replaced (swapping is easier)

The Motivation behind Harpoon terminals

1. I want to use the terminal since I can gF and gF to any errors arising from execution that are within the terminal that are not appropriate for something like dispatch. (not just running tests but perhaps a server that runs for X amount of time before crashing).
2. I want the terminal to be persistent and I can return to one of many terminals with some finger wizardry and reparse any of the execution information that was not necessarily error related.
3. I would like to have commands that can be tied to terminals and sent them without much thinking. Some sort of middle ground between vim-test and just typing them into a terminal (configuring netflix's television project isn't quite building and there are tons of ways to configure).

Use a dynamic width for the Harpoon popup menu

Sometimes the default width of 60 is not wide enough. The following example demonstrates how to configure a custom width by setting the menu's width relative to the current window's width.

require("harpoon").setup({
    menu = {
        width = vim.api.nvim_win_get_width(0) - 4,
    }
})

Tabline

By default, the tabline will use the default theme of your theme. You can customize by editing the following highlights:

• HarpoonInactive
• HarpoonActive
• HarpoonNumberActive
• HarpoonNumberInactive

Example to make it cleaner:

vim.cmd('highlight! HarpoonInactive guibg=NONE guifg=#63698c')
vim.cmd('highlight! HarpoonActive guibg=NONE guifg=white')
vim.cmd('highlight! HarpoonNumberActive guibg=NONE guifg=#7aa2f7')
vim.cmd('highlight! HarpoonNumberInactive guibg=NONE guifg=#7aa2f7')
vim.cmd('highlight! TabLineFill guibg=NONE guifg=white')

Result:

⇁ Social

For questions about Harpoon, there's a #harpoon channel on the Primeagen's Discord server.

• Discord
• Twitch
• Twitter