v2.5.10 Release Notes - September 20, 2024

v2.5.10 updates code dependencies.

Dependencies

Fabric v2.5.10 has been tested with the following dependencies:

• Go 1.23.1
• CouchDB v3.3.3

Fabric docker images on dockerhub utilize Ubuntu 20.04.

Deprecations (existing)

Ordering service system channel is deprecated

v2.3 introduced the ability to manage an ordering service without a system channel.
Managing an ordering service without a system channel has privacy, scalability,
and operational benefits. The use of a system channel is deprecated and may be removed in a future release.
For information about removal of the system channel, see the Create a channel without system channel documentation.

FAB-15754: The 'Solo' consensus type is deprecated.

The 'Solo' consensus type has always been marked non-production and should be in
use only in test environments; however, for compatibility it is still available,
but may be removed entirely in a future release.

FAB-16408: The 'Kafka' consensus type is deprecated.

The 'Raft' consensus type was introduced in v1.4.1 and has become the preferred
production consensus type. There is a documented and tested migration path from
Kafka to Raft, and existing users should migrate to the newer Raft consensus type.
For compatibility with existing deployments, Kafka is still supported,
but may be removed entirely in a future release.
Additionally, the fabric-kafka and fabric-zookeeper docker images are no longer updated, maintained, or published.

Fabric CouchDB image is deprecated

v2.2.0 added support for CouchDB 3.1.0 as the recommended and tested version of CouchDB.
If prior versions are utilized, a Warning will appear in the peer log.
Note that CouchDB 3.1.0 requires that an admin username and password be set,
while this was optional in CouchDB v2.x. See the
Fabric CouchDB documentation
for configuration details.
Also note that CouchDB 3.1.0 default max_document_size is reduced to 8MB. Set a higher value if needed in your environment.
Finally, the fabric-couchdb docker image will not be updated to v3.1.0 and will no longer be updated, maintained, or published.
Users can utilize the official CouchDB docker image maintained by the Apache CouchDB project instead.

FAB-7559: Support for specifying orderer endpoints at the global level in channel configuration is deprecated.

Utilize the new 'OrdererEndpoints' stanza within the channel configuration of an organization instead.
Configuring orderer endpoints at the organization level accommodates
scenarios where orderers are run by different organizations. Using
this configuration ensures that only the TLS CA certificates of that organization
are used for orderer communications; in contrast to the global channel level endpoints which
would cause an aggregation of all orderer TLS CA certificates across
all orderer organizations to be used for orderer communications.

FAB-17428: Support for configtxgen flag --outputAnchorPeersUpdate is deprecated.

The --outputAnchorPeersUpdate mechanism for updating anchor peers has always had
limitations (for instance, it only works the first time anchor peers are updated).
Instead, anchor peer updates should be performed through channel configuration updates.

FAB-15406: The fabric-tools docker image is deprecated

The fabric-tools docker image will not be published in future Fabric releases.
Instead of using the fabric-tools docker image, users should utilize the
published Fabric binaries. The Fabric binaries can be used to make client calls
to Fabric runtime components, regardless of where the Fabric components are running.

FAB-15317: Block dissemination via gossip is deprecated

Block dissemination via gossip is deprecated and may be removed in a future release.
Fabric peers can be configured to receive blocks directly from an ordering service
node, and not gossip blocks, by using the following configuration:

peer.gossip.orgLeader: true
peer.gossip.useLeaderElection: false
peer.gossip.state.enabled: false
peer.deliveryclient.blockGossipEnabled: false

FAB-15061: Legacy chaincode lifecycle is deprecated

The legacy chaincode lifecycle from v1.x is deprecated and will be removed
in a future release. To prepare for the eventual removal, utilize the v2.x
chaincode lifecycle instead, by enabling V2_0 application capability on all
channels, and redeploying all chaincodes using the v2.x lifecycle. The new
chaincode lifecycle provides a more flexible and robust governance model
for chaincodes. For more details see the
documentation for enabling the new lifecycle.

v3.0.0 Release Notes - September 17, 2024

New features

Byzantine Fault Tolerant (BFT) ordering service

Hyperledger Fabric has utilized a Raft crash fault tolerant (CFT) ordering service since version v1.4.1.
A Byzantine Fault Tolerant (BFT) ordering service can withstand not only crash failures, but also a subset of nodes behaving maliciously.
Fabric v3.0.0 provides a BFT ordering service based on the SmartBFT consensus library.
Consider using the BFT orderer if true decentralization is required, where up to and not including a third of the parties running the orderers may not be trusted due to malicious intent or being compromised.
Channel capability V3_0 must be enabled to utilize SmartBFT consensus.
For more details of the BFT ordering service and other recent features, see the What's New documentation.

Query all approved chaincodes on a channel

The updated peer lifecycle chaincode queryapproved command allows you to pass only a channel name.
The command will return all approved chaincodes on the channel.

Support for Ed25519

Ed25519 cryptographic algorithm is now supported in addition to ECDSA for MSP functions including transaction signing and verification.
Channel capability V3_0 must be enabled to utilize certificates with Ed25519 keys.

Improvements and Fixes

All improvements and fixes as of v2.5.9 have also been included in v3.0.0.

Dependencies

Fabric v3.0.0 has been tested with the following dependencies:

• Go 1.23.1
• CouchDB v3.3.3

Fabric docker images on dockerhub utilize Ubuntu 22.04.

Changes

peer.gossip.pvtData.transientstoreMaxBlockRetention default value increased from 1000 to 20000

peer.gossip.pvtData.transientstoreMaxBlockRetention specifies the number of blocks to keep uncommitted private data
in the transient store before it is purged. Increasing the value provides more tolerance for delayed commits
before the data is purged.

TimeWindowCheck for proposal timestamps

New TimeWindowCheck endorsement authFilter configured at peer.handlers.authFilters.name checks the timestamp of a proposal request against endorsing peer time,
using the time window configured at peer.authentication.timewindow.
This check helps to ensure that the proposal timestamp that eventually gets committed in a transaction is accurate relative to the endorsing peers.

peer.deliveryclient.blockGossipEnabled default value changed to false

Block dissemination via gossip is deprecated and may be removed in a future release,
therefore peer.deliveryclient.blockGossipEnabled now defaults to false.
Fabric peers should be configured to receive blocks directly from an ordering service
node, and not gossip blocks, by using the following configuration:

peer.gossip.orgLeader: true
peer.gossip.useLeaderElection: false
peer.gossip.state.enabled: false
peer.deliveryclient.blockGossipEnabled: false

Removals

Support for ordering service system channel has been removed

v2.3 introduced the ability to manage an ordering service without a system channel.
Managing an ordering service without a system channel has privacy, scalability, and operational benefits.
The system channel is removed in Fabric v3.0, as well as the concept of a 'consortium' of organizations that can create channels.
If you used the system channel in prior releases, you must remove the system channel and migrate to the channel participation API before upgrading to v3.x.
For information about removal of the system channel, see the Create a channel without system channel documentation.

Support for 'Solo' consensus ordering service has been removed

The 'Solo' consensus type was intended for test environments only in prior releases and has never been supported for production environments.
Support for 'Solo' consensus has been removed in Fabric v3.0.
For trial environments you can utilize a single node Raft ordering service as demonstrated in the test network tutorial.

Support for 'Kafka' consensus ordering service has been removed

The 'Raft' consensus type was introduced in v1.4.1 and has become the preferred production Crash Fault Tolerant consensus type.
Support for 'Kafka' consensus has been removed in Fabric v3.0.
If you used Kafka consensus in prior releases, you must migrate to Raft consensus prior to upgrading to v3.x.
For details about the migration process, see the Migrating from Kafka to Raft documentation.

Legacy chaincode lifecycle has been removed

The legacy chaincode lifecycle from Fabric v1.x is removed in v3.x.
Prior to upgrading peers to v3.x, you must update all channels to utilize the v2.x lifecycle
by setting the channel application capability to either V2_0 or V2_5,
and redeploying all chaincodes using the v2.x lifecycle. The new
chaincode lifecycle provides a more flexible and robust governance model
for chaincodes. For more details see the
documentation for enabling the new lifecycle.

Support for specifying orderer endpoints at the OrdererAddresses global level in channel configuration has been removed when using V3_0 channel capability

Utilize the new 'OrdererEndpoints' stanza within the channel configuration of an organization instead.
Configuring orderer endpoints at the organization level accommodates
scenarios where orderers are run by different organizations. Using
this configuration ensures that only the TLS CA certificates of that organization
are used for orderer communications; in contrast to the global channel level endpoints which
would cause an aggregation of all orderer TLS CA certificates across
all orderer organizations to be used for orderer communications.
Remove the OrdererAddresses global configuration prior to enabling the V3_0 channel capability.

Support for configtxgen flag --outputAnchorPeersUpdate has been removed

The former --outputAnchorPeersUpdate mechanism for updating anchor peers has always had
limitations (for instance, it only works the first time anchor peers are updated).
Instead, anchor peer updates should be performed through channel configuration updates.

The fabric-tools docker image is no longer available

The fabric-tools docker image is no longer published for Fabric releases.
Instead of using the fabric-tools docker image, users should utilize the
published Fabric binaries. The Fabric binaries can be used to make client calls
to Fabric runtime components, regardless of where the Fabric components are running.

Deprecated features

Block dissemination via gossip is deprecated and may be removed

Block dissemination via gossip is deprecated and may be removed in a future release.
Fabric peers can be configured to receive blocks directly from an ordering service
node, and not gossip blocks, by using the following configuration:

peer.gossip.orgLeader: true
peer.gossip.useLeaderElection: false
peer.gossip.state.enabled: false
peer.deliveryclient.blockGossipEnabled: false

v3.0.0-rc1 Release Notes - September 17, 2024

New features

Byzantine Fault Tolerant (BFT) ordering service

Hyperledger Fabric has utilized a Raft crash fault tolerant (CFT) ordering service since version v1.4.1.
A Byzantine Fault Tolerant (BFT) ordering service can withstand not only crash failures, but also a subset of nodes behaving maliciously.
Fabric v3.0.0 provides a BFT ordering service based on the SmartBFT consensus library.
Consider using the BFT orderer if true decentralization is required, where up to and not including a third of the parties running the orderers may not be trusted due to malicious intent or being compromised.
Channel capability V3_0 must be enabled to utilize SmartBFT consensus.
For more details of the BFT ordering service and other recent features, see the What's New documentation.

Query all approved chaincodes on a channel

The updated peer lifecycle chaincode queryapproved command allows you to pass only a channel name.
The command will return all approved chaincodes on the channel.

Support for Ed25519

Ed25519 cryptographic algorithm is now supported in addition to ECDSA for MSP functions including transaction signing and verification.
Channel capability V3_0 must be enabled to utilize certificates with Ed25519 keys.

Improvements and Fixes

All improvements and fixes as of v2.5.9 have also been included in v3.0.0.

Dependencies

Fabric v3.0.0 has been tested with the following dependencies:

• Go 1.23.1
• CouchDB v3.3.3

Fabric docker images on dockerhub utilize Ubuntu 22.04.

Changes

peer.gossip.pvtData.transientstoreMaxBlockRetention default value increased from 1000 to 20000

peer.gossip.pvtData.transientstoreMaxBlockRetention specifies the number of blocks to keep uncommitted private data
in the transient store before it is purged. Increasing the value provides more tolerance for delayed commits
before the data is purged.

TimeWindowCheck for proposal timestamps

New TimeWindowCheck endorsement authFilter configured at peer.handlers.authFilters.name checks the timestamp of a proposal request against endorsing peer time,
using the time window configured at peer.authentication.timewindow.
This check helps to ensure that the proposal timestamp that eventually gets committed in a transaction is accurate relative to the endorsing peers.

peer.deliveryclient.blockGossipEnabled default value changed to false

Block dissemination via gossip is deprecated and may be removed in a future release,
therefore peer.deliveryclient.blockGossipEnabled now defaults to false.
Fabric peers should be configured to receive blocks directly from an ordering service
node, and not gossip blocks, by using the following configuration:

peer.gossip.orgLeader: true
peer.gossip.useLeaderElection: false
peer.gossip.state.enabled: false
peer.deliveryclient.blockGossipEnabled: false

Removals

Support for ordering service system channel has been removed

v2.3 introduced the ability to manage an ordering service without a system channel.
Managing an ordering service without a system channel has privacy, scalability, and operational benefits.
The system channel is removed in Fabric v3.0, as well as the concept of a 'consortium' of organizations that can create channels.
If you used the system channel in prior releases, you must remove the system channel and migrate to the channel participation API before upgrading to v3.x.
For information about removal of the system channel, see the Create a channel without system channel documentation.

Support for 'Solo' consensus ordering service has been removed

The 'Solo' consensus type was intended for test environments only in prior releases and has never been supported for production environments.
Support for 'Solo' consensus has been removed in Fabric v3.0.
For trial environments you can utilize a single node Raft ordering service as demonstrated in the test network tutorial.

Support for 'Kafka' consensus ordering service has been removed

The 'Raft' consensus type was introduced in v1.4.1 and has become the preferred production Crash Fault Tolerant consensus type.
Support for 'Kafka' consensus has been removed in Fabric v3.0.
If you used Kafka consensus in prior releases, you must migrate to Raft consensus prior to upgrading to v3.x.
For details about the migration process, see the Migrating from Kafka to Raft documentation.

Legacy chaincode lifecycle has been removed

The legacy chaincode lifecycle from Fabric v1.x is removed in v3.x.
Prior to upgrading peers to v3.x, you must update all channels to utilize the v2.x lifecycle
by setting the channel application capability to either V2_0 or V2_5,
and redeploying all chaincodes using the v2.x lifecycle. The new
chaincode lifecycle provides a more flexible and robust governance model
for chaincodes. For more details see the
documentation for enabling the new lifecycle.

Support for specifying orderer endpoints at the OrdererAddresses global level in channel configuration has been removed when using V3_0 channel capability

Utilize the new 'OrdererEndpoints' stanza within the channel configuration of an organization instead.
Configuring orderer endpoints at the organization level accommodates
scenarios where orderers are run by different organizations. Using
this configuration ensures that only the TLS CA certificates of that organization
are used for orderer communications; in contrast to the global channel level endpoints which
would cause an aggregation of all orderer TLS CA certificates across
all orderer organizations to be used for orderer communications.
Remove the OrdererAddresses global configuration prior to enabling the V3_0 channel capability.

Support for configtxgen flag --outputAnchorPeersUpdate has been removed

The former --outputAnchorPeersUpdate mechanism for updating anchor peers has always had
limitations (for instance, it only works the first time anchor peers are updated).
Instead, anchor peer updates should be performed through channel configuration updates.

The fabric-tools docker image is no longer available

The fabric-tools docker image is no longer published for Fabric releases.
Instead of using the fabric-tools docker image, users should utilize the
published Fabric binaries. The Fabric binaries can be used to make client calls
to Fabric runtime components, regardless of where the Fabric components are running.

Deprecated features

Block dissemination via gossip is deprecated and may be removed

Block dissemination via gossip is deprecated and may be removed in a future release.
Fabric peers can be configured to receive blocks directly from an ordering service
node, and not gossip blocks, by using the following configuration:

peer.gossip.orgLeader: true
peer.gossip.useLeaderElection: false
peer.gossip.state.enabled: false
peer.deliveryclient.blockGossipEnabled: false

v2.5.9 Release Notes - June 18, 2024

v2.5.9 updates code dependencies.

Dependencies

Fabric v2.5.9 has been tested with the following dependencies:

• Go 1.22.4
• CouchDB v3.3.3

Fabric docker images on dockerhub utilize Ubuntu 20.04.

Deprecations (existing)

Ordering service system channel is deprecated

v2.3 introduced the ability to manage an ordering service without a system channel.
Managing an ordering service without a system channel has privacy, scalability,
and operational benefits. The use of a system channel is deprecated and may be removed in a future release.
For information about removal of the system channel, see the Create a channel without system channel documentation.

FAB-15754: The 'Solo' consensus type is deprecated.

The 'Solo' consensus type has always been marked non-production and should be in
use only in test environments; however, for compatibility it is still available,
but may be removed entirely in a future release.

FAB-16408: The 'Kafka' consensus type is deprecated.

The 'Raft' consensus type was introduced in v1.4.1 and has become the preferred
production consensus type. There is a documented and tested migration path from
Kafka to Raft, and existing users should migrate to the newer Raft consensus type.
For compatibility with existing deployments, Kafka is still supported,
but may be removed entirely in a future release.
Additionally, the fabric-kafka and fabric-zookeeper docker images are no longer updated, maintained, or published.

Fabric CouchDB image is deprecated

v2.2.0 added support for CouchDB 3.1.0 as the recommended and tested version of CouchDB.
If prior versions are utilized, a Warning will appear in the peer log.
Note that CouchDB 3.1.0 requires that an admin username and password be set,
while this was optional in CouchDB v2.x. See the
Fabric CouchDB documentation
for configuration details.
Also note that CouchDB 3.1.0 default max_document_size is reduced to 8MB. Set a higher value if needed in your environment.
Finally, the fabric-couchdb docker image will not be updated to v3.1.0 and will no longer be updated, maintained, or published.
Users can utilize the official CouchDB docker image maintained by the Apache CouchDB project instead.

FAB-7559: Support for specifying orderer endpoints at the global level in channel configuration is deprecated.

Utilize the new 'OrdererEndpoints' stanza within the channel configuration of an organization instead.
Configuring orderer endpoints at the organization level accommodates
scenarios where orderers are run by different organizations. Using
this configuration ensures that only the TLS CA certificates of that organization
are used for orderer communications; in contrast to the global channel level endpoints which
would cause an aggregation of all orderer TLS CA certificates across
all orderer organizations to be used for orderer communications.

FAB-17428: Support for configtxgen flag --outputAnchorPeersUpdate is deprecated.

The --outputAnchorPeersUpdate mechanism for updating anchor peers has always had
limitations (for instance, it only works the first time anchor peers are updated).
Instead, anchor peer updates should be performed through channel configuration updates.

FAB-15406: The fabric-tools docker image is deprecated

The fabric-tools docker image will not be published in future Fabric releases.
Instead of using the fabric-tools docker image, users should utilize the
published Fabric binaries. The Fabric binaries can be used to make client calls
to Fabric runtime components, regardless of where the Fabric components are running.

FAB-15317: Block dissemination via gossip is deprecated

Block dissemination via gossip is deprecated and may be removed in a future release.
Fabric peers can be configured to receive blocks directly from an ordering service
node, and not gossip blocks, by using the following configuration:

peer.gossip.orgLeader: true
peer.gossip.useLeaderElection: false
peer.gossip.state.enabled: false
peer.deliveryclient.blockGossipEnabled: false

FAB-15061: Legacy chaincode lifecycle is deprecated

The legacy chaincode lifecycle from v1.x is deprecated and will be removed
in a future release. To prepare for the eventual removal, utilize the v2.x
chaincode lifecycle instead, by enabling V2_0 application capability on all
channels, and redeploying all chaincodes using the v2.x lifecycle. The new
chaincode lifecycle provides a more flexible and robust governance model
for chaincodes. For more details see the
documentation for enabling the new lifecycle.

v2.5.8 Release Notes - May 21, 2024

v2.5.8 updates code dependencies.

Dependencies

Fabric v2.5.8 has been tested with the following dependencies:

• Go 1.22.3
• CouchDB v3.3.3

Fabric docker images on dockerhub utilize Ubuntu 20.04.

Deprecations (existing)

Ordering service system channel is deprecated

v2.3 introduced the ability to manage an ordering service without a system channel.
Managing an ordering service without a system channel has privacy, scalability,
and operational benefits. The use of a system channel is deprecated and may be removed in a future release.
For information about removal of the system channel, see the Create a channel without system channel documentation.

FAB-15754: The 'Solo' consensus type is deprecated.

The 'Solo' consensus type has always been marked non-production and should be in
use only in test environments; however, for compatibility it is still available,
but may be removed entirely in a future release.

FAB-16408: The 'Kafka' consensus type is deprecated.

The 'Raft' consensus type was introduced in v1.4.1 and has become the preferred
production consensus type. There is a documented and tested migration path from
Kafka to Raft, and existing users should migrate to the newer Raft consensus type.
For compatibility with existing deployments, Kafka is still supported,
but may be removed entirely in a future release.
Additionally, the fabric-kafka and fabric-zookeeper docker images are no longer updated, maintained, or published.

Fabric CouchDB image is deprecated

v2.2.0 added support for CouchDB 3.1.0 as the recommended and tested version of CouchDB.
If prior versions are utilized, a Warning will appear in the peer log.
Note that CouchDB 3.1.0 requires that an admin username and password be set,
while this was optional in CouchDB v2.x. See the
Fabric CouchDB documentation
for configuration details.
Also note that CouchDB 3.1.0 default max_document_size is reduced to 8MB. Set a higher value if needed in your environment.
Finally, the fabric-couchdb docker image will not be updated to v3.1.0 and will no longer be updated, maintained, or published.
Users can utilize the official CouchDB docker image maintained by the Apache CouchDB project instead.

FAB-7559: Support for specifying orderer endpoints at the global level in channel configuration is deprecated.

Utilize the new 'OrdererEndpoints' stanza within the channel configuration of an organization instead.
Configuring orderer endpoints at the organization level accommodates
scenarios where orderers are run by different organizations. Using
this configuration ensures that only the TLS CA certificates of that organization
are used for orderer communications; in contrast to the global channel level endpoints which
would cause an aggregation of all orderer TLS CA certificates across
all orderer organizations to be used for orderer communications.

FAB-17428: Support for configtxgen flag --outputAnchorPeersUpdate is deprecated.

The --outputAnchorPeersUpdate mechanism for updating anchor peers has always had
limitations (for instance, it only works the first time anchor peers are updated).
Instead, anchor peer updates should be performed through channel configuration updates.

FAB-15406: The fabric-tools docker image is deprecated

The fabric-tools docker image will not be published in future Fabric releases.
Instead of using the fabric-tools docker image, users should utilize the
published Fabric binaries. The Fabric binaries can be used to make client calls
to Fabric runtime components, regardless of where the Fabric components are running.

FAB-15317: Block dissemination via gossip is deprecated

Block dissemination via gossip is deprecated and may be removed in a future release.
Fabric peers can be configured to receive blocks directly from an ordering service
node, and not gossip blocks, by using the following configuration:

peer.gossip.orgLeader: true
peer.gossip.useLeaderElection: false
peer.gossip.state.enabled: false
peer.deliveryclient.blockGossipEnabled: false

FAB-15061: Legacy chaincode lifecycle is deprecated

The legacy chaincode lifecycle from v1.x is deprecated and will be removed
in a future release. To prepare for the eventual removal, utilize the v2.x
chaincode lifecycle instead, by enabling V2_0 application capability on all
channels, and redeploying all chaincodes using the v2.x lifecycle. The new
chaincode lifecycle provides a more flexible and robust governance model
for chaincodes. For more details see the
documentation for enabling the new lifecycle.

v2.5.7 Release Notes - April 15, 2024

v2.5.7 updates code dependencies.

Dependencies

Fabric v2.5.7 has been tested with the following dependencies:

• Go 1.21.9
• CouchDB v3.3.3

Fabric docker images on dockerhub utilize Ubuntu 20.04.

Deprecations (existing)

Ordering service system channel is deprecated

v2.3 introduced the ability to manage an ordering service without a system channel.
Managing an ordering service without a system channel has privacy, scalability,
and operational benefits. The use of a system channel is deprecated and may be removed in a future release.
For information about removal of the system channel, see the Create a channel without system channel documentation.

FAB-15754: The 'Solo' consensus type is deprecated.

The 'Solo' consensus type has always been marked non-production and should be in
use only in test environments; however, for compatibility it is still available,
but may be removed entirely in a future release.

FAB-16408: The 'Kafka' consensus type is deprecated.

The 'Raft' consensus type was introduced in v1.4.1 and has become the preferred
production consensus type. There is a documented and tested migration path from
Kafka to Raft, and existing users should migrate to the newer Raft consensus type.
For compatibility with existing deployments, Kafka is still supported,
but may be removed entirely in a future release.
Additionally, the fabric-kafka and fabric-zookeeper docker images are no longer updated, maintained, or published.

Fabric CouchDB image is deprecated

v2.2.0 added support for CouchDB 3.1.0 as the recommended and tested version of CouchDB.
If prior versions are utilized, a Warning will appear in the peer log.
Note that CouchDB 3.1.0 requires that an admin username and password be set,
while this was optional in CouchDB v2.x. See the
Fabric CouchDB documentation
for configuration details.
Also note that CouchDB 3.1.0 default max_document_size is reduced to 8MB. Set a higher value if needed in your environment.
Finally, the fabric-couchdb docker image will not be updated to v3.1.0 and will no longer be updated, maintained, or published.
Users can utilize the official CouchDB docker image maintained by the Apache CouchDB project instead.

FAB-7559: Support for specifying orderer endpoints at the global level in channel configuration is deprecated.

Utilize the new 'OrdererEndpoints' stanza within the channel configuration of an organization instead.
Configuring orderer endpoints at the organization level accommodates
scenarios where orderers are run by different organizations. Using
this configuration ensures that only the TLS CA certificates of that organization
are used for orderer communications; in contrast to the global channel level endpoints which
would cause an aggregation of all orderer TLS CA certificates across
all orderer organizations to be used for orderer communications.

FAB-17428: Support for configtxgen flag --outputAnchorPeersUpdate is deprecated.

The --outputAnchorPeersUpdate mechanism for updating anchor peers has always had
limitations (for instance, it only works the first time anchor peers are updated).
Instead, anchor peer updates should be performed through channel configuration updates.

FAB-15406: The fabric-tools docker image is deprecated

The fabric-tools docker image will not be published in future Fabric releases.
Instead of using the fabric-tools docker image, users should utilize the
published Fabric binaries. The Fabric binaries can be used to make client calls
to Fabric runtime components, regardless of where the Fabric components are running.

FAB-15317: Block dissemination via gossip is deprecated

Block dissemination via gossip is deprecated and may be removed in a future release.
Fabric peers can be configured to receive blocks directly from an ordering service
node, and not gossip blocks, by using the following configuration:

peer.gossip.orgLeader: true
peer.gossip.useLeaderElection: false
peer.gossip.state.enabled: false
peer.deliveryclient.blockGossipEnabled: false

FAB-15061: Legacy chaincode lifecycle is deprecated

The legacy chaincode lifecycle from v1.x is deprecated and will be removed
in a future release. To prepare for the eventual removal, utilize the v2.x
chaincode lifecycle instead, by enabling V2_0 application capability on all
channels, and redeploying all chaincodes using the v2.x lifecycle. The new
chaincode lifecycle provides a more flexible and robust governance model
for chaincodes. For more details see the
documentation for enabling the new lifecycle.

v3.0.0-beta Release Notes - March 14, 2024

The v3.0.0-beta release is an early release of Fabric v3.0, specifically to demonstrate and get feedback on the new Byzantine Fault Tolerant (BFT) ordering service.

v3.0.0-beta is not intended to be used in production and is not intended as an upgrade target from prior versions. It can however be used to test the process
for migrating from Raft to SmartBFT consensus.

New features

Byzantine Fault Tolerant (BFT) ordering service

Hyperledger Fabric has utilized a Raft crash fault tolerant (CFT) ordering service since version v1.4.1.
A Byzantine Fault Tolerant (BFT) ordering service can withstand not only crash failures, but also a subset of nodes behaving maliciously.
Fabric v3.0.0-beta provides a BFT ordering service based on the SmartBFT consensus library.
Consider using the BFT orderer if true decentralization is required, where up to and not including a third of the parties running the orderers may not be trusted due to malicious intent or being compromised.
For more details of the BFT ordering service and other recent features, see the What's New documentation.

The v3.0.0-beta release differs from the v3.0.0-preview release by making the peer and orderer block replication resistant to block withholding.
Block withholding is when an orderer receives a request for blocks it possesses, but it delays sending the blocks and by doing so, slows down the requester's block reception.
As described in the RFC, block withholding resistance incurs a bandwidth and CPU cost,
and therefore an operator of an orderer may opt out and use the standard mechanism by specifying ReplicationPolicy: simple in the local configuration.

Query all approved chaincodes on a channel

The updated peer lifecycle chaincode queryapproved command allows you to pass only a channel name.
The command will return all approved chaincodes on the channel.

Improvements and Fixes

All improvements and fixes as of v2.5.6 have also been included in v3.0.0-beta.

Dependencies

Fabric v3.0.0-beta has been tested with the following dependencies:

• Go 1.21.8
• CouchDB v3.3.3

Fabric docker images on dockerhub utilize Ubuntu 20.04.

Changes

peer.gossip.pvtData.transientstoreMaxBlockRetention default value increased from 1000 to 20000

peer.gossip.pvtData.transientstoreMaxBlockRetention specifies the number of blocks to keep uncommitted private data
in the transient store before it is purged. Increasing the value provides more tolerance for delayed commits
before the data is purged.

Removals

Support for ordering service system channel has been removed

v2.3 introduced the ability to manage an ordering service without a system channel.
Managing an ordering service without a system channel has privacy, scalability, and operational benefits.
The system channel is removed in Fabric v3.0, as well as the concept of a 'consortium' of organizations that can create channels.
If you used the system channel in prior releases, you must remove the system channel and migrate to the channel participation API before upgrading to v3.x.
For information about removal of the system channel, see the Create a channel without system channel documentation.

Support for 'Solo' consensus ordering service has been removed

The 'Solo' consensus type was intended for test environments only in prior releases and has never been supported for production environments.
Support for 'Solo' consensus has been removed in Fabric v3.0.
For trial environments you can utilize a single node Raft ordering service as demonstrated in the test network tutorial.

Support for 'Kafka' consensus ordering service has been removed

The 'Raft' consensus type was introduced in v1.4.1 and has become the preferred production consensus type.
Support for 'Kafka' consensus has been removed in Fabric v3.0.
If you used Kafka consensus in prior releases, you must migrate to Raft consensus prior to upgrading to v3.x.
For details about the migration process, see the Migrating from Kafka to Raft documentation.

Legacy chaincode lifecycle has been removed

The legacy chaincode lifecycle from v1.x is removed in v3.x.
Prior to upgrading peers to v3.x, you must update all channels to utilize the v2.x lifecycle
by setting the channel application capability to either V2_0 or V2_5,
and redeploying all chaincodes using the v2.x lifecycle. The new
chaincode lifecycle provides a more flexible and robust governance model
for chaincodes. For more details see the
documentation for enabling the new lifecycle.

Deprecated features

Support for specifying orderer endpoints at the global level in channel configuration is deprecated and may be removed.

Utilize the new 'OrdererEndpoints' stanza within the channel configuration of an organization instead.
Configuring orderer endpoints at the organization level accommodates
scenarios where orderers are run by different organizations. Using
this configuration ensures that only the TLS CA certificates of that organization
are used for orderer communications; in contrast to the global channel level endpoints which
would cause an aggregation of all orderer TLS CA certificates across
all orderer organizations to be used for orderer communications.

Support for configtxgen flag --outputAnchorPeersUpdate is deprecated and may be removed.

The --outputAnchorPeersUpdate mechanism for updating anchor peers has always had
limitations (for instance, it only works the first time anchor peers are updated).
Instead, anchor peer updates should be performed through channel configuration updates.

The fabric-tools docker image is deprecated and may be removed

The fabric-tools docker image will not be published in future Fabric releases.
Instead of using the fabric-tools docker image, users should utilize the
published Fabric binaries. The Fabric binaries can be used to make client calls
to Fabric runtime components, regardless of where the Fabric components are running.

Block dissemination via gossip is deprecated and may be removed

Block dissemination via gossip is deprecated and may be removed in a future release.
Fabric peers can be configured to receive blocks directly from an ordering service
node, and not gossip blocks, by using the following configuration:

peer.gossip.orgLeader: true
peer.gossip.useLeaderElection: false
peer.gossip.state.enabled: false
peer.deliveryclient.blockGossipEnabled: false

v2.5.6 Release Notes - February 19, 2024

v2.5.6 updates code dependencies.

Dependencies

Fabric v2.5.6 has been tested with the following dependencies:

• Go 1.21.6
• CouchDB v3.3.3

Fabric docker images on dockerhub utilize Ubuntu 20.04.

Deprecations (existing)

Ordering service system channel is deprecated

v2.3 introduced the ability to manage an ordering service without a system channel.
Managing an ordering service without a system channel has privacy, scalability,
and operational benefits. The use of a system channel is deprecated and may be removed in a future release.
For information about removal of the system channel, see the Create a channel without system channel documentation.

FAB-15754: The 'Solo' consensus type is deprecated.

The 'Solo' consensus type has always been marked non-production and should be in
use only in test environments; however, for compatibility it is still available,
but may be removed entirely in a future release.

FAB-16408: The 'Kafka' consensus type is deprecated.

The 'Raft' consensus type was introduced in v1.4.1 and has become the preferred
production consensus type. There is a documented and tested migration path from
Kafka to Raft, and existing users should migrate to the newer Raft consensus type.
For compatibility with existing deployments, Kafka is still supported,
but may be removed entirely in a future release.
Additionally, the fabric-kafka and fabric-zookeeper docker images are no longer updated, maintained, or published.

Fabric CouchDB image is deprecated

v2.2.0 added support for CouchDB 3.1.0 as the recommended and tested version of CouchDB.
If prior versions are utilized, a Warning will appear in the peer log.
Note that CouchDB 3.1.0 requires that an admin username and password be set,
while this was optional in CouchDB v2.x. See the
Fabric CouchDB documentation
for configuration details.
Also note that CouchDB 3.1.0 default max_document_size is reduced to 8MB. Set a higher value if needed in your environment.
Finally, the fabric-couchdb docker image will not be updated to v3.1.0 and will no longer be updated, maintained, or published.
Users can utilize the official CouchDB docker image maintained by the Apache CouchDB project instead.

FAB-7559: Support for specifying orderer endpoints at the global level in channel configuration is deprecated.

Utilize the new 'OrdererEndpoints' stanza within the channel configuration of an organization instead.
Configuring orderer endpoints at the organization level accommodates
scenarios where orderers are run by different organizations. Using
this configuration ensures that only the TLS CA certificates of that organization
are used for orderer communications; in contrast to the global channel level endpoints which
would cause an aggregation of all orderer TLS CA certificates across
all orderer organizations to be used for orderer communications.

FAB-17428: Support for configtxgen flag --outputAnchorPeersUpdate is deprecated.

The --outputAnchorPeersUpdate mechanism for updating anchor peers has always had
limitations (for instance, it only works the first time anchor peers are updated).
Instead, anchor peer updates should be performed through channel configuration updates.

FAB-15406: The fabric-tools docker image is deprecated

The fabric-tools docker image will not be published in future Fabric releases.
Instead of using the fabric-tools docker image, users should utilize the
published Fabric binaries. The Fabric binaries can be used to make client calls
to Fabric runtime components, regardless of where the Fabric components are running.

FAB-15317: Block dissemination via gossip is deprecated

Block dissemination via gossip is deprecated and may be removed in a future release.
Fabric peers can be configured to receive blocks directly from an ordering service
node, and not gossip blocks, by using the following configuration:

peer.gossip.orgLeader: true
peer.gossip.useLeaderElection: false
peer.gossip.state.enabled: false
peer.deliveryclient.blockGossipEnabled: false

FAB-15061: Legacy chaincode lifecycle is deprecated

The legacy chaincode lifecycle from v1.x is deprecated and will be removed
in a future release. To prepare for the eventual removal, utilize the v2.x
chaincode lifecycle instead, by enabling V2_0 application capability on all
channels, and redeploying all chaincodes using the v2.x lifecycle. The new
chaincode lifecycle provides a more flexible and robust governance model
for chaincodes. For more details see the
documentation for enabling the new lifecycle.

v2.2.15 Release Notes - February 19, 2024

v2.2.15 updates code dependencies.

Dependencies

Fabric v2.2.15 has been tested with the following dependencies:

• Go 1.21.6
• CouchDB v3.3.3

Fabric docker images on dockerhub utilize Alpine 3.18.

Deprecations (existing)

FAB-15754: The 'Solo' consensus type is deprecated.

The 'Solo' consensus type has always been marked non-production and should be in
use only in test environments, however for compatibility it is still available,
but may be removed entirely in a future release.

FAB-16408: The 'Kafka' consensus type is deprecated.

The 'Raft' consensus type was introduced in v1.4.1 and has become the preferred
production consensus type. There is a documented and tested migration path from
Kafka to Raft, and existing users should migrate to the newer Raft consensus type.
For compatibility with existing deployments, Kafka is still supported,
but may be removed entirely in a future release.
Additionally, the fabric-kafka and fabric-zookeeper docker images are no longer updated, maintained, or published.

Fabric CouchDB image is deprecated

v2.2.0 added support for CouchDB 3.1.0 as the recommended and tested version of CouchDB.
If prior versions are utilized, a Warning will appear in peer log.
Note that CouchDB 3.1.0 requires that an admin username and password be set,
while this was optional in CouchDB v2.x. See the
Fabric CouchDB documentation
for configuration details.
Also note that CouchDB 3.1.0 default max_document_size is reduced to 8MB. Set a higher value if needed in your environment.
Finally, the fabric-couchdb docker image will not be updated to v3.1.0 and will no longer be updated, maintained, or published.
Users can utilize the official CouchDB docker image maintained by the Apache CouchDB project instead.

FAB-7559: Support for specifying orderer endpoints at the global level in channel configuration is deprecated.

Utilize the new 'OrdererEndpoints' stanza within the channel configuration of an organization instead.
Configuring orderer endpoints at the organization level accommodates
scenarios where orderers are run by different organizations. Using
this configuration ensures that only the TLS CA certificates of that organization
are used for orderer communications, in contrast to the global channel level endpoints which
would cause an aggregation of all orderer TLS CA certificates across
all orderer organizations to be used for orderer communications.

FAB-17428: Support for configtxgen flag --outputAnchorPeersUpdate is deprecated.

The --outputAnchorPeersUpdate mechanism for updating anchor peers has always had
limitations (for instance, it only works the first time anchor peers are updated).
Instead, anchor peer updates should be performed through the normal config update flow.

FAB-15406: The fabric-tools docker image is deprecated

The fabric-tools docker image will not be published in future Fabric releases.
Instead of using the fabric-tools docker image, users should utilize the
published Fabric binaries. The Fabric binaries can be used to make client calls
to Fabric runtime components, regardless of where the Fabric components are running.

FAB-15317: Block dissemination via gossip is deprecated

Block dissemination via gossip is deprecated and may be removed in a future release.
Fabric peers can be configured to receive blocks directly from an ordering service
node by using the following configuration:

peer.gossip.orgLeader: true
peer.gossip.useLeaderElection: false
peer.gossip.state.enabled: false
peer.deliveryclient.blockGossipEnabled: false

FAB-15061: Legacy chaincode lifecycle is deprecated

The legacy chaincode lifecycle from v1.x is deprecated and will be removed
in a future release. To prepare for the eventual removal, utilize the v2.x
chaincode lifecycle instead, by enabling V2_0 application capability on all
channels, and redeploying all chaincodes using the v2.x lifecycle. The new
chaincode lifecycle provides a more flexible and robust governance model
for chaincodes. For more details see the
documentation for enabling the new lifecycle.

v2.5.5 Release Notes - October 31, 2023

Fixes

Verify transactions in a block are well formed

Verify that transactions in blocks appear exactly as their marshaled form after unmarshaling.
#4503

Dependencies

Fabric v2.5.5 has been tested with the following dependencies:

• Go 1.21.3
• CouchDB v3.3.2

Fabric docker images on dockerhub utilize Ubuntu 20.04.

Deprecations (existing)

Ordering service system channel is deprecated

v2.3 introduced the ability to manage an ordering service without a system channel.
Managing an ordering service without a system channel has privacy, scalability,
and operational benefits. The use of a system channel is deprecated and may be removed in a future release.
For information about removal of the system channel, see the Create a channel without system channel documentation.

FAB-15754: The 'Solo' consensus type is deprecated.

The 'Solo' consensus type has always been marked non-production and should be in
use only in test environments; however, for compatibility it is still available,
but may be removed entirely in a future release.

FAB-16408: The 'Kafka' consensus type is deprecated.

The 'Raft' consensus type was introduced in v1.4.1 and has become the preferred
production consensus type. There is a documented and tested migration path from
Kafka to Raft, and existing users should migrate to the newer Raft consensus type.
For compatibility with existing deployments, Kafka is still supported,
but may be removed entirely in a future release.
Additionally, the fabric-kafka and fabric-zookeeper docker images are no longer updated, maintained, or published.

Fabric CouchDB image is deprecated

v2.2.0 added support for CouchDB 3.1.0 as the recommended and tested version of CouchDB.
If prior versions are utilized, a Warning will appear in the peer log.
Note that CouchDB 3.1.0 requires that an admin username and password be set,
while this was optional in CouchDB v2.x. See the
Fabric CouchDB documentation
for configuration details.
Also note that CouchDB 3.1.0 default max_document_size is reduced to 8MB. Set a higher value if needed in your environment.
Finally, the fabric-couchdb docker image will not be updated to v3.1.0 and will no longer be updated, maintained, or published.
Users can utilize the official CouchDB docker image maintained by the Apache CouchDB project instead.

FAB-7559: Support for specifying orderer endpoints at the global level in channel configuration is deprecated.

Utilize the new 'OrdererEndpoints' stanza within the channel configuration of an organization instead.
Configuring orderer endpoints at the organization level accommodates
scenarios where orderers are run by different organizations. Using
this configuration ensures that only the TLS CA certificates of that organization
are used for orderer communications; in contrast to the global channel level endpoints which
would cause an aggregation of all orderer TLS CA certificates across
all orderer organizations to be used for orderer communications.

FAB-17428: Support for configtxgen flag --outputAnchorPeersUpdate is deprecated.

The --outputAnchorPeersUpdate mechanism for updating anchor peers has always had
limitations (for instance, it only works the first time anchor peers are updated).
Instead, anchor peer updates should be performed through channel configuration updates.

FAB-15406: The fabric-tools docker image is deprecated

The fabric-tools docker image will not be published in future Fabric releases.
Instead of using the fabric-tools docker image, users should utilize the
published Fabric binaries. The Fabric binaries can be used to make client calls
to Fabric runtime components, regardless of where the Fabric components are running.

FAB-15317: Block dissemination via gossip is deprecated

Block dissemination via gossip is deprecated and may be removed in a future release.
Fabric peers can be configured to receive blocks directly from an ordering service
node, and not gossip blocks, by using the following configuration:

peer.gossip.orgLeader: true
peer.gossip.useLeaderElection: false
peer.gossip.state.enabled: false
peer.deliveryclient.blockGossipEnabled: false

FAB-15061: Legacy chaincode lifecycle is deprecated

The legacy chaincode lifecycle from v1.x is deprecated and will be removed
in a future release. To prepare for the eventual removal, utilize the v2.x
chaincode lifecycle instead, by enabling V2_0 application capability on all
channels, and redeploying all chaincodes using the v2.x lifecycle. The new
chaincode lifecycle provides a more flexible and robust governance model
for chaincodes. For more details see the
documentation for enabling the new lifecycle.