Hwmon's Documentation

Authors:

Bla	Son-link	Guillermo-C-A

Backend and distribution	GUI frontend	Backend

Install Hwmon

Check the python version in Linux

Before installing or running Hwmon it is essential to have a system with GNU/Linux along with python 3. To see the version of Python you have installed on your system you have to execute these sentences in the terminal:

python --version

or

python3 --version

And you will keep the name (without -version) that returns python 3.xx. Where de xx can be any number (ex: 3.5, 3.8, etc...).

In this case, we will keep the name "python3", since it is the "executable" of version 3 for python.

Install python-pip

To install Hwmon you can choose to do it in an automatic or manual way, but it is recommended to do the manual installation since it is the most updated version compared to the automatic version.

Regardless of whether it is manual or not, you must have pip or pip3 installed. Depending on the name where the python3 version is hosted, it will have to be installed in one way or another.

python3 -> sudo apt install python3-pip
python -> sudo apt install python-pip

Install Hwmon

If you want to install the automatic version, you will only have to execute this sentence:

python3 -> pip3 install hwmon
python -> pip install hwmon

In case it is manual, you will have to follow these steps:

Installing git if you don't have it installed
```
sudo apt install git-all
```

Execute these sentences at the terminal

git clone https://github.com/Guillermo-C-A/Hwmon-python.git
cd Hwmon-python
python3 -> pip3 install .
python -> pip install .

Ex:

Use our terminal interface to see everything our library has to offer :)

cd bin
python3 -> python3 hwmon-cli --help
python -> python hwmon-cli --help

Ex:

python3 -> python3 hwmon-cli --sensors
python -> python hwmon-cli --sensors

More examples:

python3 -> python3 hwmon-cli --cpu --gpu --sensors
python -> python hwmon-cli --cpu --gpu --sensors

Help us

We are open to new ideas and people who want to improve this project, so feel free to open pull requests or leave us your opinions/problems with the application in this section.

Don't forget to give a star to this repository :D

Disclaimer

The information presented in this library may vary depending on the distribution or kernel being executed, to the point of giving error in certain functions such as GPU.

In case this happens, inform us of the error so that we can fix the fault :)

Tested and stable kernels:

5.8 (Ubuntu 20)
5.4.0.42.46 (Ubuntu 20)

It has also been tested on three different computers with AMD CPU and GPU configurations successfully and stably

New features

We are currently working in parallel to develop the interfaces for this library. You can download the terminal interface this link

In addition, the desktop GUI is in the process of being created.

Motivations to create Hwmon

Hwmon has been created with the intention of replacing Linux libraries and APIs which obtain system information without the need to depend on dependencies outside a standard Linux system.

The only requirements for running Hwmon on a system are:

The OS is Linux
Have python 3
Install hwmon library

Hwmon is also a library developed expressly by and for Python 3 with functions that are easy to understand and operate, which read and synthesize in the same library all the useful information for monitoring a Linux system that can be found in the /sys, /proc and /dev folders. So only the information that the system itself has recorded will be obtained.

Why use Hwmon instead of other library?

As already mentioned, Hwmon does not require any dependencies or programs and is a library created with the standard Python 3 libraries. Which is not the case like other library/software such as:

Pysensors
lm-sensors
psutil

Where you need files and other softwares to be able to work, so if you're missing some of that, it just doesn't work. They are also heavier solutions in terms of file sizes than Hwmon.

Is it really a viable alternative to lm-sensors?

Yes. Hwmon is able to return and print the same information that is obtained when installing and running sensors.

And it even prints the information on the screen in a nice and friendly way so that it is more useful and easy to understand.

What information can I get from Hwmon and where does he get it from?

Hwmon is able to extract:

Information from the sensors available on the computer
Processor information
System memory information
Sent and received packet information
USB devices connected to the computer
Disks connected to the computer
BIOS information
GPU information

All this information is extracted respectively from the following sites:

Sensors: /sys/class/hwmon
CPU: /proc/cpuinfo and /proc/stat
RAM: /proc/meminfo
Network: /proc/net/dev
USB: /dev/input/by-id
Disks: /dev/disk/by-id
GPU: /sys/class/graphics or /sys/class/drm/card0/device/
BIOS: /sys/class/dmi/id/

How to use and call the library?

from hwmon import Hwmon

Sensor information

To access the sensor subclass, the following statement will be executed:

sensors = Hwmon.HW()

Being the functions that interest us in this case: data() and print_data() . Let's see an example of each function:

Print sensors

This function will print all the sensor information of the system in a tabular and nice way.

sensors.print_data()

 amdgpu
	 vddgfx 0.862 v
	 power1 35.04 w
	 fan1 1119 RPM
	 edge 33.0 C
 nct6779
	 AUXTIN3 -28.0 C
	 in3 3.344 v
	 fan3 0 RPM
	 in7 3.472 v
	 AUXTIN0 -2.5 C
	 in12 1.68 v
	 in0 0.568 v
	 PCH_CPU_TEMP 0.0 C
	 SMBUSMASTER 0 32.5 C
	 in4 1.84 v
	 fan4 0 RPM
	 in8 3.264 v
	 AUXTIN1 85.0 C
	 in13 0.944 v
	 in1 0.0 v
	 fan1 0 RPM
	 PCH_CHIP_CPU_MAX_TEMP 0.0 C
	 in5 0.84 v
	 SYSTIN 31.0 C
	 in10 0.352 v
	 fan5 0 RPM
	 in9 0.0 v
	 AUXTIN2 23.0 C
	 in14 1.848 v
	 in2 3.344 v
	 fan2 1945 RPM
	 PCH_CHIP_TEMP 0.0 C
	 in6 1.536 v
	 CPUTIN 33.0 C
	 in11 1.056 v
 k10temp
	 Tdie 32.625 C
	 Tctl 32.625 C

Get data

In case we are interested in getting the information from the sensors instead of printing it on the screen, we will execute the following sentence:

sensors.data()

{'amdgpu': {'vddgfx': '0.862 v',
  'power1': '34.169 w',
  'fan1': '1120 RPM',
  'edge': '33.0 C'},
 'nct6779': {'AUXTIN3': '-28.0 C',
  'in3': '3.344 v',
  'fan3': '0 RPM',
  'in7': '3.472 v',
  'AUXTIN0': '-2.5 C',
  'in12': '1.68 v',
  'in0': '0.568 v',
  'PCH_CPU_TEMP': '0.0 C',
  'SMBUSMASTER 0': '32.5 C',
  'in4': '1.84 v',
  'fan4': '0 RPM',
  'in8': '3.264 v',
  'AUXTIN1': '85.0 C',
  'in13': '0.944 v',
  'in1': '0.0 v',
  'fan1': '0 RPM',
  'PCH_CHIP_CPU_MAX_TEMP': '0.0 C',
  'in5': '0.84 v',
  'SYSTIN': '31.0 C',
  'in10': '0.352 v',
  'fan5': '0 RPM',
  'in9': '0.0 v',
  'AUXTIN2': '23.0 C',
  'in14': '1.848 v',
  'in2': '3.344 v',
  'fan2': '1945 RPM',
  'PCH_CHIP_TEMP': '0.0 C',
  'in6': '1.536 v',
  'CPUTIN': '33.0 C',
  'in11': '1.056 v'},
 'k10temp': {'Tdie': '32.625 C', 'Tctl': '32.625 C'}}

Processor information

To access the processor subclass, the following sentence will be executed

cpu = Hwmon.CPU()

Being the functions that interest us in this case: data() and print_data(). Let's see an example of each function:

Print information

This function will print all the information of the system processor in a tabular and nice way.

cpu.print_data()

Name AMD Ryzen 5 1400 Quad-Core Processor
CPU_usage 26.71
cores 4
threads 8
cpu MHz
        0 1374.813
        1 1374.788
        2 1374.887
        3 1374.75
        4 1510.204
        5 1501.796
        6 3475.097
        7 2196.461
Max MHz 3800
Average_MHz 1772.85

Get data

In case we are interested in obtaining the information from the processor instead of printing it on the screen, we will execute the following sentence:

cpu.data()

{'Name': 'AMD Ryzen 5 1400 Quad-Core Processor',
 'CPU_usage': -34.37,
 'cores': '4',
 'threads': '8',
 'cpu MHz': {0: 1374.906,
    1: 1374.774, 
    2: 1374.735, 
    3: 1374.718, 
    4: 1374.724, 
    5: 1374.91, 
    6: 1374.804, 
    7: 1374.706},
 'Max MHz': 3800, 
 'Average_MHz': 1374.78}

Memory information

To access the system memory subclass, the following sentence will be executed:

memory = Hwmon.MEM()

Being the functions that interest us in this case: data() and print_data() . Let's see an example of each function:

Print information

This function will print in a tabular and nice way all the information in the system memory.

memory.print_data()

 MemTotal 7.768MB
 MemFree 2.569MB
 MemAvailable 4.349MB
 Buffers 156.973KB
 Cached 1.850MB
 SwapCached 0B
 Active 3.608MB
 Inactive 1.012MB
 Active(anon) 2.576MB
 Inactive(anon) 116.551KB
 Active(file) 1.032MB
 Inactive(file) 919.520KB
 Unevictable 32.0B
 Mlocked 32.0B
 SwapTotal 2.000MB
 SwapFree 2.000MB
 Dirty 960.0B
 Writeback 0B
 AnonPages 2.617MB
 Mapped 683.496KB
 Shmem 118.547KB
 KReclaimable 122.035KB
 Slab 270.754KB
 SReclaimable 122.035KB
 SUnreclaim 148.719KB
 KernelStack 24.109KB
 PageTables 70.258KB
 NFS_Unstable 0B
 Bounce 0B
 WritebackTmp 0B
 CommitLimit 5.884MB
 Committed_AS 11.335MB
 VmallocTotal 32.000GB
 VmallocUsed 40.414KB
 VmallocChunk 0B
 Percpu 14.250KB
 HardwareCorrupted 0B
 AnonHugePages 0B
 ShmemHugePages 0B
 ShmemPmdMapped 0B
 CmaTotal 0B
 CmaFree 0B
 HugePages_Total 0B
 HugePages_Free 0B
 HugePages_Rsvd 0B
 HugePages_Surp 0B
 Hugepagesize 2.000KB
 Hugetlb 0B
 DirectMap4k 447.266KB
 DirectMap2M 6.498MB
 DirectMap1G 2.000MB

Get data

In case we are interested in obtaining the information from memory instead of printing it out on the screen, we will execute the following sentence:

memory.data()

{'MemTotal': '7.768MB',
 'MemFree': '2.569MB',
 'MemAvailable': '4.349MB',
 'Buffers': '156.980KB',
 'Cached': '1.850MB',
 'SwapCached': '0B',
 'Active': '3.608MB',
 'Inactive': '1.012MB',
 'Active(anon)': '2.576MB',
 'Inactive(anon)': '116.551KB',
 'Active(file)': '1.032MB',
 'Inactive(file)': '919.520KB',
 'Unevictable': '32.0B',
 'Mlocked': '32.0B',
 'SwapTotal': '2.000MB',
 'SwapFree': '2.000MB',
 'Dirty': '964.0B',
 'Writeback': '0B',
 'AnonPages': '2.616MB',
 'Mapped': '683.496KB',
 'Shmem': '118.547KB',
 'KReclaimable': '122.035KB',
 'Slab': '270.754KB',
 'SReclaimable': '122.035KB',
 'SUnreclaim': '148.719KB',
 'KernelStack': '24.109KB',
 'PageTables': '70.258KB',
 'NFS_Unstable': '0B',
 'Bounce': '0B',
 'WritebackTmp': '0B',
 'CommitLimit': '5.884MB',
 'Committed_AS': '11.335MB',
 'VmallocTotal': '32.000GB',
 'VmallocUsed': '40.414KB',
 'VmallocChunk': '0B',
 'Percpu': '14.250KB',
 'HardwareCorrupted': '0B',
 'AnonHugePages': '0B',
 'ShmemHugePages': '0B',
 'ShmemPmdMapped': '0B',
 'CmaTotal': '0B',
 'CmaFree': '0B',
 'HugePages_Total': '0B',
 'HugePages_Free': '0B',
 'HugePages_Rsvd': '0B',
 'HugePages_Surp': '0B',
 'Hugepagesize': '2.000KB',
 'Hugetlb': '0B',
 'DirectMap4k': '447.266KB',
 'DirectMap2M': '6.498MB',
 'DirectMap1G': '2.000MB'}

Network information

To access the network subclass, the following sentence will be executed:

net = Hwmon.NET()

Being the functions that interest us in this case: data() and print_data() . Let's see an example of each function:

Print information

This function will print in a tabular and nice way all the information of the system network.

net.print_data()

     lo
	 receive
		 bytes 7593337
		 packets 14478
		 errs 0
		 drop 0
		 fifo 0
		 frame 0
		 compressed 0
		 multicast 0
	 transmit
		 bytes 14478
		 packets 0
		 errs 0
		 drop 0
		 fifo 0
		 colls 0
		 carrier 0
 enp37s0
	 receive
		 bytes 1279460566
		 packets 864808
		 errs 0
		 drop 0
		 fifo 0
		 frame 0
		 compressed 0
		 multicast 507
	 transmit
		 bytes 362337
		 packets 0
		 errs 0
		 drop 0
		 fifo 0
		 colls 0
		 carrier 0
 docker0
	 receive
		 bytes 0
		 packets 0
		 errs 0
		 drop 0
		 fifo 0
		 frame 0
		 compressed 0
		 multicast 0
	 transmit
		 bytes 0
		 packets 0
		 errs 0
		 drop 0
		 fifo 0
		 colls 0
		 carrier 0

Get data

In case we are interested in getting the information from the network instead of printing it on the screen, we will execute the following sentence:

net.data()

{'    lo': {'receive': {'bytes': 7605359,
   'packets': 14503,
   'errs': 0,
   'drop': 0,
   'fifo': 0,
   'frame': 0,
   'compressed': 0,
   'multicast': 0},
  'transmit': {'bytes': 14503,
   'packets': 0,
   'errs': 0,
   'drop': 0,
   'fifo': 0,
   'colls': 0,
   'carrier': 0}},
 'enp37s0': {'receive': {'bytes': 1279460566,
   'packets': 864808,
   'errs': 0,
   'drop': 0,
   'fifo': 0,
   'frame': 0,
   'compressed': 0,
   'multicast': 507},
  'transmit': {'bytes': 362337,
   'packets': 0,
   'errs': 0,
   'drop': 0,
   'fifo': 0,
   'colls': 0,
   'carrier': 0}},
 'docker0': {'receive': {'bytes': 0,
   'packets': 0,
   'errs': 0,
   'drop': 0,
   'fifo': 0,
   'frame': 0,
   'compressed': 0,
   'multicast': 0},
  'transmit': {'bytes': 0,
   'packets': 0,
   'errs': 0,
   'drop': 0,
   'fifo': 0,
   'colls': 0,
   'carrier': 0}}}

USB devices information

To access the USB subclass, the following sentence will be executed:

usb = Hwmon.USB()

Being the functions that interest us in this case: data() and print_data() . Let's see an example of each function:

Print information

This function will print in a tabular and nice way all the information of the USBs in the system.

usb.print_data()

usb-Logitech_Gaming_Mouse_G300-mouse
usb-CHICONY_USB_Keyboard
usb-Logitech_Gaming_Mouse_G300
usb-Logitech_Gaming_Mouse_G300-if01

Get data

In case we are interested in getting the information from the sensors instead of printing it on the screen, we will execute the following sentence:

usb.data()

['usb-Logitech_Gaming_Mouse_G300-mouse',
 'usb-CHICONY_USB_Keyboard',
 'usb-Logitech_Gaming_Mouse_G300',
 'usb-Logitech_Gaming_Mouse_G300-if01']

Disks information

To access the subclass of the disks, the following sentence will be executed:

disk = Hwmon.DISK()

Being the functions that interest us in this case: data() and print_data() . Let's see an example of each function:

Print information

This function will print in a tabular and nice way all the information of the disks in the system.

disk.print_data()

wwn-0x50014ee202380e97
ata-WDC_WD3200BEVT-22ZCT0_WD-WXEY08F45384
wwn-0x500080dc007530e0
ata-TOSHIBA-TL100_27NB51GCKSZU
wwn-0x50014ee20b769657
ata-WDC_WD20EZRX-22D8PB0_WD-WCC4M1ZJ83JD

Get data

In case we are interested in getting the information from the sensors instead of printing it on the screen, we will execute the following sentence:

disk.data()

['wwn-0x500080dc007530e0',
 'ata-WDC_WD3200BEVT-22ZCT0_WD-WXEY08F45384',
 'ata-TOSHIBA-TL100_27NB51GCKSZU',
 'wwn-0x50014ee202380e97',
 'wwn-0x50014ee20b769657',
 'ata-WDC_WD20EZRX-22D8PB0_WD-WCC4M1ZJ83JD']

GPU information

To access the GPU subclass, the following statement will be executed:

gpu = Hwmon.GPU()

Being the functions that interest us in this case: data() and print_data() . Let's see an example of each function:

Print information

This function will print all the information of the GPU in a tabular and nice way.

gpu.print_data()

amdgpudrmfb
     Resolution 1680x1050p
     gpu_busy_percent 0 %
     mem_info_vram_used 361.31MB
     current_link_width 16
     mem_info_vis_vram_used 46.77MB
     mem_info_vis_vram_total 256.00MB
     current_link_speed 8 GT/s
     mem_busy_percent 19 %
     mem_info_gtt_used 52.29MB
     mem_info_vram_total 8.00GB
     vbios_version 113-C9403100_101
     mem_info_gtt_total 5.83GB

Get data

In case we are interested in getting the information from the gpu instead of printing it on the screen, we will execute the following sentence:

gpu.data()

{'amdgpudrmfb':
{'Resolution': '1680x1050p',
'gpu_busy_percent': '0 %',
'mem_info_vram_used': '367.23MB',
'current_link_width': '16',
'mem_info_vis_vram_used': '46.77MB',
'mem_info_vis_vram_total': '256.00MB',
'current_link_speed': '8 GT/s',
'mem_busy_percent': '19 %',
'mem_info_gtt_used': '56.88MB',
'mem_info_vram_total': '8.00GB',
'vbios_version': '113-C9403100_101',
'mem_info_gtt_total': '5.83GB'}}

BIOS information

To access the BIOS subclass, the following statement will be executed:

bios = Hwmon.BIOS()

Being the functions that interest us in this case: data() and print_data() . Let's see an example of each function:

Print information

This function will print all the information of the GPU in a tabular and nice way.

bios.print_data()

bios_date 12/20/2018
bios_version P5.50
board_vendor ASRock
chassis_type 3
bios_vendor American Megatrends Inc.
board_asset_tag 
board_version 
board_name AB350M-HDV

Get data

In case we are interested in getting the information from the gpu instead of printing it on the screen, we will execute the following sentence:

bios.data()

{'bios_date': '12/20/2018',
'bios_version': 'P5.50',
'board_vendor': 'ASRock',
'chassis_type': '3',
'bios_vendor': 'American Megatrends Inc.',
'board_asset_tag': '',
'board_version': '',
'board_name': 'AB350M-HDV'}

Name		Name	Last commit message	Last commit date
Latest commit History 69 Commits
Hwmon documentation		Hwmon documentation
bin		bin
hwmon		hwmon
rd_data		rd_data
.gitignore		.gitignore
HWmon2.png		HWmon2.png
LICENSE		LICENSE
README.md		README.md
cpu.txt		cpu.txt
setup.py		setup.py

License

guicalare/Hwmon-python

Folders and files

Latest commit

History

Repository files navigation

Hwmon's Documentation

Install Hwmon

Check the python version in Linux

Install python-pip

Install Hwmon

Help us

Disclaimer

New features

Motivations to create Hwmon

Why use Hwmon instead of other library?

Is it really a viable alternative to lm-sensors?

What information can I get from Hwmon and where does he get it from?

How to use and call the library?

Sensor information

Print sensors

Get data

Processor information

Print information

Get data

Memory information

Print information

Get data

Network information

Print information

Get data

USB devices information

Print information

Get data

Disks information

Print information

Get data

GPU information

Print information

Get data

BIOS information

Print information

Get data

About

Topics

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Contributors 2

Languages

Packages