MESTI (Maxwell's Equations Solver with Thousands of Inputs) is an open-source software for full-wave electromagnetic simulations in frequency domain using finite-difference discretization on the Yee lattice.
MESTI implements the augmented partial factorization (APF) method described in this paper. While conventional methods solve Maxwell's equations on every element of the discretization basis set (which contains much more information than is typically needed), APF bypasses such intermediate solution step and directly computes the projected quantities of interest: a generalized scattering matrix given any list of input source profiles and any list of output projection profiles. It can jointly handle thousands of inputs without a loop over them, using fewer computing resources than what a conventional direct method uses to handle a single input. It is exact with no approximation beyond discretization.
The MESTI.jl package here provides all the features in the 2D MATLAB version MESTI.m and additionally supports 3D vectorial systems, anisotropic ε, MPI parallelization, both single-precision and double-precision arithmetics, and can perform subpixel smoothing for the geometric shapes handled by GeometryPrimitives.jl. It is written in Julia.
In the 3D case, MESTI.jl solves
For 2D systems in the transverse-magnetic (TM) polarization (Ex, Hy, Hz), MESTI.jl solves
where b(r) or b(y,z) is the source profile.
MESTI.jl is a general-purpose solver with an interface written to provide maximal flexibility. It supports
- Full 3D vectorial systems.
- TM polarization for 2D systems.
- Any tensor or scalar relative permittivity profile
$\bar{\bar{\varepsilon}}({\bf r})$ , which can be real-valued or complex-valued. - Open boundary modeled by a perfectly matched layer (PML) placed on any side(s), with both imaginary-coordinate and real-coordinate stretching (so the PML can accelerate the attenuation of evanescent waves in addition to attenuating the propagating waves).
- Periodic, Bloch periodic, perfect electrical conductor (PEC), and/or perfect magnetic conductor (PMC) boundary conditions.
-
Subpixel smoothing for the geometric shapes handled by GeometryPrimitives.jl through function
mesti_subpixel_smoothing(). - Any material dispersion
$\bar{\bar{\varepsilon}}$ (ω), since this is a frequency-domain method. - Any list of input source profiles (user-specified or automatically built).
- Any list of output projection profiles (or no projection, in which case the complete field profiles are returned).
- Real-valued or complex-valued frequency ω.
- Automatic or manual choice between APF or a conventional direct solver (e.g., to compute the full field profile) as the solution method.
- Linear solver using MUMPS (requires installation) or the built-in routines in Julia (which uses UMFPACK).
- Shared memory parallelism (with multithreaded BLAS and with OpenMP in MUMPS) and distributed memory parallelism (with MPI in MUMPS).
- Single-precision or double-precision arithmetic.
MESTI.jl can perform most linear-response computations for arbitrary structures, such as
- Scattering problems: transmission, reflection transport through complex media, waveguide bent, grating coupler, radar cross-section, controlled-source electromagnetic surveys, etc.
- Thermal emission.
- Local density of states.
- Inverse design based on the above quantities.
Since MESTI.jl can use the APF method to handle a large number of input states simultaneously, the computational advantage of MESTI.jl is the most pronounced in multi-input systems.
There are use cases that MESTI.jl can handle but is not necessarily the most efficient, such as
- Broadband response problems involving many frequencies but only a few input states. Time-domain methods like FDTD may be preferred as they can compute a broadband response without looping over the frequencies.
- Problems like plasmonics that require more than an order of magnitude difference in the discretization grid size at different regions of the structure. Finite-element methods may be preferred as they can handle varying spatial resolutions. (Finite-element methods can also adopt APF, but MESTI.jl uses finite difference with a fixed grid size.)
- Homogeneous structures with a small surface-to-volume ratio. Boundary element methods may be preferred as they only discretize the surface.
Problems that MESTI.jl does not handle:
- Nonlinear systems (e.g., χ(2), χ(3), gain media).
- Magnetic systems (e.g., spatially varying permeability μ).
For eigenmode computation, such as waveguide mode solver and photonic band structure computation, one can use mesti_build_fdfd_matrix.jl to build the matrix and then compute its eigenmodes. However, we don't currently provide a dedicated function to do so.
MESTI.jl is written and run in Julia programming language. Follow the standard process to download and install Julia. We can download Julia here. Suppose we installed the 1.9.3 version of Julia. After Julia is installed, we can add the path of your Julia to PATH through the terminal by
export PATH=".../julia-1.9.3/bin/"where ... is the path to your Julia.
Before installing MESTI.jl, the user first needs to install the parallel version of the sparse linear solver MUMPS. Without MUMPS, MESTI.jl can still run but cannot use the APF method and will only use a conventional method with the built-in linear solver, which can be orders of magnitude slower and uses much more memory (especially in 3D and for large 2D systems). See this MUMPS installation page for steps to install MUMPS. For this MESTI (v0.5.0), it is compatible with MUMPS versions 5.7.0 and 5.7.1, but not with versions earlier than 5.7.0. We highly recommend using the latest version of MUMPS.
After the MUMPS installation, if you have a clean Julia environment (i.e. have not installed any Julia package before or have not installed new version of Makie.jl(v0.20 and v0.21) and GeometryPrimitives.jl(v0.5.0), you can install MESTI.jl (v0.5.0) by opening the command-line interface of Julia and typing:
import Pkg; Pkg.add("MESTI")On the other hand, if you have installed these two Julia packages: the new version of Makie.jl(v0.20 and v0.21) and GeometryPrimitives.jl(v0.5.0). You will encounter some compatibility problems and the installation will fail. In this case, please run
import Pkg; Pkg.add(Pkg.PackageSpec(;name="Makie", version="0.19.12")); Pkg.add("GeometryPrimitives"); Pkg.add("MESTI")to downgrade them to the old version compatible with our MESTI.jl and then install MESTI.jl(v0.5.0).
After installing MESTI.jl, if the user happens to run the command to upgrade every Julia package to the latest version, such as Pkg.update(), it would install the latest version of Makie.jl and make MESTI.jl not compatible with it. So please rerun the line above to downgrade to the compatible version and reinstall MESTI.jl.
To see whether you install the right version, you can always check the version of MESTI by opening the command-line interface of Julia and typing:
import Pkg; Pkg.status("MESTI")If you want our latest MESTI.jl, it should show
[8d7f31fa] MESTI v0.5.0After compiling MUMPS and installation MESTI.jl, run install_packages.jl to install other Julia packages used in the tests and examples.
Now we are ready to run the following test scripts
If any of them does not run successfully, please look back at the compilation of MUMPS or the Julia interface to see if there were serious warning messages.
Then, run runtests.jl in the test folder. This script runs three tests:
If all pass, congratulations! You are done and be able to run MESTI.jl with MUMPS solver.
The function mesti(syst, B, C, D) provides the most flexibility. Structure syst specifies the permittivity profile, boundary conditions in x, y, and z, which side(s) to put PML with what parameters, the wavelength, and the discretization grid size. Any list of input source profiles can be specified with matrix B, each column of which specifies one source profile b(r). Any list of output projection profiles can be specified with matrix C. Matrix D is optional (treated as zero when not specified) and subtracts the baseline contribution; see the APF paper for details.
The function mesti2s(syst, in, out) deals specifically with scattering problems in two-sided or one-sided geometries where in and out. The function mesti2s() automatically builds the source matrix B, projection matrix C, baseline matrix D, and calls mesti() for the computation. Flux normalization in z is applied automatically so, when the PML is thick enough, the full scattering matrix is unitary when
To compute the complete field profiles, simply omit the argument C or out.
The solution method, the linear solver to use, and other options can be specified with a structure opts as an optional input argument to mesti() or mesti2s(); see documentation for details. They are chosen automatically when not explicitly specified.
The function mesti_build_channels() can be used to build the input and/or output matrices when using mesti() or to determine which channels are of interest when using mesti2s().
The function mesti_subpixel_smoothing() can be used to build the permittivity profile with subpixel smoothing.
Detailed documentation is given in comments at the beginning of the function files:
mesti_main.jlformesti()mesti2s.jlformesti2s()mesti_build_channels.jlformesti_build_channels()mesti_subpixel_smoothingformesti_subpixel_smoothing()
For example, typing ? mesti2s in Julia brings up the documentation for mesti2s().
MESTI.jl can use both distributed memory parallelization across nodes/sockets through MPI and shared memory parallelization within one node/socket through multithreading (if MUMPS was compiled with multithreading enabled). The multithreading speed-up comes from using a multithreaded BLAS library and L0-threads feature in MUMPS. Parts of the MUMPS utilize multithreading with L0-threads through OpenMP directives. With APF, most of the computing time is spent on factorization within MUMPS (e.g., see Fig 2d of the APF paper). The factorization and solving stages within MUMPS are parallelized. The building and analyzing stages are not performance-critical and are not parallelized.
L0-threads (see the MUMPS Users' guide for details) in multithreading enhances the time performance, but marginally increases the memory usage. It is enabled by default when it is in 1D, 2D, or 2.5D ((width in x)(width in y)/(thickness in z) $\geqslant 100$). In full 3D ((width in x)(width in y)/(thickness in z) opts.use_L0_threads in the input argument opts.
In MUMPS, multithreading is more efficient than MPI, both in speed and in memory usage. So, we should maximize multithreading before using MPI. For example, if we use one node with a single socket having 8 cores (where the 8 cores sharing the same memory), we should use one MPI process (i.e., no MPI) with 8 threads, instead of 8 MPI processes with one thread each. As another example, if we use 3 nodes, each node has 2 sockets, and each socket has 4 cores sharing the same memory of that socket (so, 24 cores in total), we should use 6 MPI processes (one per socket) with 4 threads per MPI process, instead of 24 MPI processes with one thread each.
The default number of threads is the number of cores available on the machine (either the number of physical cores, or the number of cores requested when running the job with a scheduler like Slurm on a cluster). Therefore, we only need to launch MESTI with the number of MPI processes equaling the total number of sockets.
We can set the number of threads to be different from the default by setting the environment variable OMP_NUM_THREADS or the field opts.nthreads_OMP of the optional input argument opts.
To use MPI, we should prepare the script to construct the system on the main processor and call worker processors when needed. An example script and its corresponding submission script on a cluster are provided in the MPI folder.
To check the actual number of MPI processes and threads used in MUMPS, set opts.verbal_solver = true in the input argument and look at the standard output from MUMPS. For example, the following output
executing #MPI = 2 and #OMP = 4
shows 2 MPI processes with 4 threads each.
Examples in the examples folder illustrate the usage and the main functionalities of MESTI. Each example has its own folder, with its .jl and .ipynb script, auxiliary files specific to that example, and a README.md page that shows the example script with its outputs:
- Open channel in a disordered system: 2D, using
mesti2s(), transmission matrix & field profile with customized wavefronts. - Phase-conjugated focusing in disordered system: 2D, using
mesti()andmesti2s(), customized source & field profile with customized wavefronts. - Reflection matrix in Gaussian-beam basis: 2D, using
mesti(), reflection matrix in customized basis for a fully open system. - Metalens focusing via angular spectrum propagation: 2D, using
mesti(), focusing field calculated using angular spectrum propagation.
Also see the following repository:
- metalens_inverse_design: Using MESTI.jl to perform multi-angle inverse design of a wide-field-of-view metalens.
Here are some animations from the examples above:
- Open channel propagating through disorder
- Focusing phase-conjugated light through disorder
- Reflection matrix of a scatterer in Gaussian-beam basis
- Inverse designed wide-field-of-view metalens
We thank William Sweeney for granting us permission to integrate his MUMPS-julia interface, MUMPS3.jl, into this package. The files bearing the mumps3 prefix in the src directory have been adopted from MUMPS3.jl.
For more information on the theory, capability, and benchmarks (e.g., scaling of computing time, memory usage, and accuracy), please see:
- Ho-Chun Lin, Zeyu Wang, and Chia Wei Hsu. Fast multi-source nanophotonic simulations using augmented partial factorization. Nature Computational Science 2, 815–822 (2022).
@article{2022_Lin_NCS,
title = {Fast multi-source nanophotonic simulations using augmented partial factorization},
author = {Lin, Ho-Chun and Wang, Zeyu and Hsu, Chia Wei},
journal = {Nat. Comput. Sci.},
volume = {2},
issue = {12},
pages = {815--822},
year = {2022},
month = {Dec},
doi = {10.1038/s43588-022-00370-6}
}Please cite this paper when you use MESTI.