Tatra T.101

Ringhoffer-Tatra started making aircraft in 1935, building the Avro 626 Avian and Bücker Bü 131 Jungmann under licence. In 1937 the Tatra T.001 was the first aircraft designed and built by Tatra. The T.101 was a development of that aircraft, with an increased wingspan and a larger empennage than the T.001.^[1][2]

Only one aircraft was built by Ringhoffer-Tatra, msn 01. It was registered OK-TAO.

The Tatra T.101 gained a number of records. In 1937 a prize was offered for the longest flight by an aircraft of Czechoslovakian origin. In 1938 Jan Ambruš and Vojtěch Matěna flew from Ruzyně Airport, Prague to Khartoum Airport, Sudan,^[1] a distance of 2,340 nautical miles (4,330 km).^[3] The aircraft achieved a height record of 7,113 metres (23,337 ft) in the category for two-seat aircraft with an engine capacity of less than 4 litres (240 cu in). This was later raised to 7,470 metres (24,510 ft).^[2]

After the Velvet Revolution of 1989, citizens in the Czech Republic and Slovakia gained new freedom. The celebration of heritage had been suppressed under communism and the restoration of historic aircraft was forbidden by the Communist authorities. Since the revolution, interest in heritage has grown, and a number of attempts to revive industrial heritage, including aviation heritage, have been successful.^[1]

One of these projects was the re-creation of the Tatra T.101 by twins Ivo and Jiří Sklenář. In the early 2000s they started researching the aircraft and discovered that the blueprints had escaped destruction. They were discovered in the state archive at Opava. A Tatra HM-504 and a Tatra T100 engine were acquired with the assistance of Tatra and the Czech Aeronautical Research and Testing Institute [cz]. These two engines were rebuilt and made into an airworthy T100 engine with the assistance of Tatra and the Czech National Technical Museum.

The process was hampered by the non-availability of spare parts, particularly cylinder valves. A new two-bladed wooden propeller was one of the first items made for the aircraft. The replica used some modern manufacturing methods and materials, such as TIG welding, carbon composites and fibreglass. Deviations from the original design were made only where required by modern aeronautical regulations. The aircraft has modern avionics and a strobe light.^[1]

The 13.00 metres (42 ft 8 in) span wooden wings are a one-piece unit. They were built by Jan Tobek, an ultralight aircraft maker. The wing is the largest wooden wing built in the Czech Republic since the end of World War II. The aircraft was assembled at Kunovice Airport in a hangar owned by Evektor-Aerotechnik and Let Kunovice. The aircraft was completed on 29 September 2008. After ground testing, a series of flight tests was begun in October 2009, resulting in the issue of a Certificate of Airworthiness on 1 December 2009. The replica aircraft was given msn 02.^[1]

Data from Aeroplane, April 2012,^[2] and/or the Aviators website.^[4]

General characteristics

• Crew: 2
• Length: 6.62 m (21 ft 9 in)
• Wingspan: 13 m (42 ft 8 in)
• Wing area: 16.4 m² (177 sq ft)
• Empty weight: 500 kg (1,102 lb)
• Max takeoff weight: 1,100 kg (2,425 lb)
• Powerplant: 1 × Tatra T100 4-cylinder air-cooled inverted in-line piston engine, 71 kW (95 hp)
• Propellers: 2-bladed fixed-pitch propeller

Performance

• Maximum speed: 225 km/h (140 mph, 121 kn)
• Cruise speed: 200 km/h (120 mph, 110 kn)
• Range: 5,000 km (3,100 mi, 2,700 nmi)
• Endurance: 30 hours
• Service ceiling: 8,000 m (26,000 ft)

• Tatra T.001, which the T.101 was developed from.
• Tatra T.201, which was developed from the T.101
• Zlin 26, which was developed from the T.201

 

Wikimedia Commons has media related to Tatra 101.

• Images of various Tatra designed aircraft