Oldsmobile Aurora

Early design work on what would become the Aurora began as early as the late 1980s with the 1989 Oldsmobile Tube Car engineering concept, designed by Bud Chandler. In addition to the overall similar shape, the Tube Car featured many detailed elements that were later found on the production automobile, including a full-width taillamp, wraparound rear windshield, and frameless windows. Unlike the eventual production car, the Tube Car used a pillarless hardtop design with suicide doors. The final production design was signed off on in July 1989, originally set for a 1992 start of production.^[1][2]

By the Aurora's introduction, Oldsmobile sales had fallen from a record high of 1,066,122 in 1985 to 402,936 in 1993; rumors of the division's demise were rampant, which GM at the time firmly denied.^[3] Competition from Acura, Infiniti and Lexus offered similar products that benefited from superior durability and reliability reputations. GM developed the Aurora to rejuvenate Oldsmobile as a result.^[4] The Aurora bore no Oldsmobile badging save for the radio-CD-cassette deck and engine cover (during focus group testing, potential customers had been repelled when they learned the Aurora was in truth an Oldsmobile).^[5] At one point, then-division head John Rock (who had recently arrived from the GMC division) proposed using the Aurora name to replace the Oldsmobile brand entirely and offer cars in a similar fashion to GM's nascent Saturn division (a plan ultimately nixed by the GM higher-ups, though for a period Saturn's no-haggle pricing was implemented^[6]).^[7][8][9] Instead, the Aurora used a stylized A emblem, foreshadowing a similar restyling of Oldsmobile's corporate "rocket" emblem for 1997.^[10][11]

One bizarre footnote of development was a 1993 incident where a prototype Aurora, driven by freelance car reviewer Tim Dunne, was nearly totaled after a four-foot log fell from a Michigan Department of Natural Resources truck (Dunne was able to maneuver the Aurora so much that only the right front wheel was struck); this subsequently led then-governor John Engler to purchase an Aurora (Engler having been a life-long Oldsmobile customer).^[12]

Oldsmobile subsequently borrowed Aurora styling cues for its Intrigue and compact Alero models.

First generation
Overview
Production	January 24, 1994 – June 25, 1999
Model years	1995–1999
Designer	Dennis Burke (1989)[1]
Body and chassis
Platform	G-body
Related	Buick Riviera Buick Park Avenue Cadillac Seville Cadillac DeVille
Powertrain
Engine	Gasoline: 4.0 L L47 V8
Transmission	4-speed 4T80-E automatic
Dimensions
Wheelbase	113.8 in (2,891 mm)
Length	205.4 in (5,217 mm)
Width	74.4 in (1,890 mm)
Height	55.4 in (1,407 mm)
Curb weight	3,967 lb (1,799 kg)

The Aurora went into production on January 24, 1994,^[13] and was released for the 1995 model year, featuring dual-zone climate control, driver and front passenger airbags, leather seating surfaces, genuine burl walnut interior accents, six-speaker sound system with in-dash cd-cassette, and eight-way power adjustable front seats with 2-position memory.^[14] An onboard computer displaying the date, current gas consumption, and other information was also standard, and was mounted in the center of the dashboard, above the factory radio and climate controls. Options included a power sunroof, Bose Acoustimass premium amplified sound system, heated front seats, and Autobahn package.

 

The Aurora came standard with Oldsmobile's 4.0 L (244 cu in) L47 V8 engine, a DOHC engine based on Cadillac's 4.6 L Northstar V8. The Northstar engine and 4T80-E had been exclusive to Cadillac prior to the Aurora. The L47 put out 250 hp (186 kW) at 5600 rpm and 260 lb⋅ft (353 N⋅m) torque at 4400 rpm.^[15] The Aurora used a four-speed automatic transmission with driver selectable "normal" and "power" shift modes. A highly modified 650 hp (485 kW) version of this engine was used by General Motors racing division initially for Indy Racing League and IMSA competition starting in 1995 with the GM-supported Aurora GTS-1 racing program, then was later used in the Cadillac Northstar LMP program in 2000. Both engines retained the 4.0 L capacity, but the Northstar LMP version was twin-turbocharged.^[16] The Aurora had a drag coefficient of 0.32.^[17]

The Aurora was noted for its engine, build quality, ride, and structural integrity. During normal crush-to-failure tests to evaluate body torsional rigidity, the Aurora's unibody construction broke GM's testing machine.^[18] A frame-crusher otherwise used to test stronger truck frames had to be used, with the car twice exceeding federal standards for passenger cars.

First-generation Auroras were manufactured in Lake Orion, Michigan, along with the Buick LeSabre, Buick Park Avenue, Buick Riviera, Oldsmobile 88, Oldsmobile 98 and Pontiac Bonneville.

 

• For 1996, Oldsmobile made some minor revisions to the Aurora including new rear glass which has less distortion than previous models.

Further revisions include daytime running lights and OBD II compliant on-board diagnostic systems, tweaking the climate control and safety alarm, a revised keyless entry system with new features and the short list of optional equipment was expanded to include chrome wheels and a gold trim package. The 1996-'99 models also had the passenger temperature toggle buttons on the middle-right portion of the instrument panel replaced with air recirculator buttons.

• Chrome wheels are now an option.
• There were some minor equipment changes.

There were minor changes for the Aurora in 1997. A new in-dash CD player for the Bose sound system highlighted the improvements. Another new feature was a tilt-down right-outside mirror that enhances the driver's view of close objects, whenever the shifter is placed in reverse. The underside of the door handles were slightly recontoured to minimize slipping fingers when the handles are pulled. Seat belt release buttons were moved from the face of the buckle to the end for improved convenience. An electronic compass was added to the inside rear-view mirror. Larger front brakes came along with cast aluminum front control arms and steering knuckles. The rear ashtray assembly was changed from a click-lock face to a pull-up face. Finally, the spare tire cover and jack cradle assembly was changed from the jack and cover being bolted down to one where the jack sat in a plastic "bucket" inside the spare with the cover simply placed on top. On some 1997 models, a modest "Oldsmobile" badge returned to the right-rear corner of the car along with the Aurora name.

 

The 1998 model had a few minor refinement changes to the brakes, suspension, steering and emissions controls. A new front control arm design with front hydraulic bushing and rear cross axis ball joint for enhanced ride smoothness and better isolation from road noise and vibration. Internal rebound springs added to front struts for improved body motion control and to minimize crash-through. Increased wheel travel (3 mm) and redesigned jounce bumpers for softer feel at full travel. Dual durometer cradle mounts for improved isolation. Premium valving and damping in the front and rear struts for a higher refinement in calibration. There were more accurate wheel sensors for improved ABS actuation. New steering calibration for more on-center feel and reduced parking effort.

GM's previously optional OnStar system, standard for this year, uses a dedicated button on the cellular telephone putting drivers in contact with an information center that can provide them with emergency assistance. The system uses no transmitters to determine the vehicle's location and provide route information to any destination.

Almost all of the changes made to the Aurora for 1998 were aimed at refining what was already a highly regarded suspension system.

The last year for the first generation Aurora. Changes for 1999 included additional engine mounts for improved engine stability.

Production for this generation ended on June 25, 1999.^[19] No 2000 models were produced.

Production Figures:

*Production figures for 1999 were not provided

Second generation
Overview
Production	November 1, 1999 – March 28, 2003
Model years	2001–2003
Designer	Dennis Burke (1996)[21]
Body and chassis
Platform	G-body
Related	Buick LeSabre Buick Park Avenue Pontiac Bonneville Cadillac Seville Cadillac DeVille
Powertrain
Engine	Gasoline: 3.5 L LX5 V6 4.0 L L47 V8
Transmission	4-speed 4T65-E automatic 4-speed 4T80-E automatic
Dimensions
Wheelbase	112.2 in (2,850 mm)
Length	199.3 in (5,062 mm)
Width	72.9 in (1,852 mm)
Height	56.7 in (1,440 mm)
Curb weight	3,627 lb (1,645 kg)

Oldsmobile's original intention for the second generation was to move the Aurora further upmarket, retaining its V8-only drivetrain and sharing a platform with the new Buick Riviera, as with the first gen Aurora. This would have created more room within the Oldsmobile line for a four-door Eighty-Eight successor to be marketed as the "Antares" (though there was talk of naming it the Aurora V-6 or Aurora 6, as the Antares name was not liked during focus group testing);^[22] this platform was known internally as "G-plus".^{[23][24][25][26]} Buick dropped its Riviera development plans at the same time Oldsmobile faced fiscal trouble.^[27] The division was then forced to re-engineer the Antares into an acceptable Aurora in a short time.^[28] Still using the G-body design, the re-engineered Aurora was the result, retaining its 4.0 V8 Northstar mounted to a 4T80-E automatic transmission.

The second generation Aurora also offered a V6 engine, the LX5, a version of the DOHC Aurora V8 with six cylinders. The V6-powered Aurora was manufactured solely for model years 2001–2002, with production ending in mid-2002.

 

 

This Aurora did not sell as well as the original, overshadowed by GM's announcement in December 2000 that the Oldsmobile marque was to be phased out over the next several years. Though still retaining its unique styling, it now also shared design cues with other Oldsmobiles. The second generation Aurora was about six inches shorter than was the first generation. Automobile magazine wrote that "The Aurora's new look is not quite as sensuous or elegant as that of the outgoing model,"^[29] but the Auto Channel review said, "it was better in every respect."^[16]

The second generation Aurora went into production on November 1, 1999,^[19] and went on sale in February 2000^[29] as a 2001 model. The last V6-powered Auroras was assembled on June 21, 2002. The final 500 Auroras ended production on March 28, 2003.^[30] These were all a special burgundy color (called "Dark Cherry Metallic"), had special chrome wheels, and "Final 500" badging. The Orion, Michigan plant built a total of 71,722 second-generation Auroras;^{[citation needed]} 53,640 in 2001, 10,865 in 2002, and 7,217 in 2003.

The second-generation Oldsmobile Aurora featured as standard equipment, keyless entry, security alarm, luxury leather-trimmed seating surfaces with power adjustments for the driver's seat, an AM-FM stereo with radio data system (RDS) and cassette and single-disc CD players, a six-speaker sound system, leather door panel inserts, wood interior trim, automatic climate control, OnStar in-vehicle telematics system (later introduction), steering wheel-mounted climate and radio controls, a leather-wrapped steering wheel, power trunk release from the keyless entry remote, a multi-function driver's information center mounted above the factory radio and climate controls, a rear bench seat with fold-down center armrest, luxury-styled alloy wheels, a spare tire and wheel, automatic front head and fog lamps, a 3.5L V6 engine, a 4-speed automatic transmission, front-wheel-drive (FWD), front and side SRS airbags.

Optional equipment included a driver's memory package with memory front driver's seat and memory for radio presets, heated dual front bucket seats, a premium audio system with external amplifier by Bose, a power tilt-and-sliding sunroof, chrome-finished alloy wheels, a gold emblem package for the front and rear Oldsmobile emblems, Aurora emblem, and 3.5 or 4.0 emblems, and the 4.0L Northstar V8 engine (this engine became standard equipment in 2003 for the Aurora's final year of production).

Starting in 2002, a voice-activated, CD-ROM based navigation system was available. The 17-inch wheels’ plastic hub caps on the second generation V8 Auroras (except for the "Final 500" which used modified Cadillac wheels) were made with mold number 442.^{[citation needed]}

• 2001–2002: LX5 3.5 L (212 in³) V6, 215 hp (160 kW) at 5600 rpm, 234 lb⋅ft (317 N⋅m) torque at 4400 rpm.^[31]
• 2001–2003: L47 4.0 L (244 in³) V8, 250 hp (186 kW) at 5600 rpm, 260 lb⋅ft (353 N⋅m) torque at 4400 rpm.^[32]

Production numbers for both generations of the Aurora:

 

Aurora was the official pace car of the 1997 and 2000 Indianapolis 500. At the beginning of the race in 1997, the pace car was driven by three-time Indy 500 winner Johnny Rutherford. At the beginning of the 2000 race, the pace car was driven by actor Anthony Edwards. These cars marked the ninth and tenth time an Oldsmobile had paced the Indianapolis 500 race.

• Northstar engine series

• Matt Delorenzo. "Oldsmobile's Slide to Oblivion". Legendary American Cars (2007).

 

Wikimedia Commons has media related to Oldsmobile Aurora.

• Outrightolds.com - Oldsmobile Aurora Model Guide
• Aurora Club of North America (ACNA) Forums
• The Oldsmobile Connection Forums
• Oldsmobile Club of America
• Toronado/Aurora Chapter of the Oldsmobile Club of America