[go: up one dir, main page]

In most computer programming languages, a while loop is a control flow statement that allows code to be executed repeatedly based on a given Boolean condition. The while loop can be thought of as a repeating if statement.

While loop flow diagram

Overview

edit

The while construct consists of a block of code and a condition/expression.[1] The condition/expression is evaluated, and if the condition/expression is true,[1] the code within all of their following in the block is executed. This repeats until the condition/expression becomes false. Because the while loop checks the condition/expression before the block is executed, the control structure is often also known as a pre-test loop. Compare this with the do while loop, which tests the condition/expression after the loop has executed.

For example, in the languages C, Java, C#,[2] Objective-C, and C++, (which use the same syntax in this case), the code fragment

int x = 0;

while (x < 5) {
    printf ("x = %d\n", x);
    x++;
}

first checks whether x is less than 5, which it is, so then the {loop body} is entered, where the printf function is run and x is incremented by 1. After completing all the statements in the loop body, the condition, (x < 5), is checked again, and the loop is executed again, this process repeating until the variable x has the value 5.

It is possible, and in some cases desirable, for the condition to always evaluate to true, creating an infinite loop. When such a loop is created intentionally, there is usually another control structure (such as a break statement) that controls termination of the loop. For example:

while (true) {
    // do complicated stuff
    if (someCondition)
        break;
    // more stuff
}

Demonstrating while loops

edit

These while loops will calculate the factorial of the number 5:

ActionScript 3

edit
var counter: int = 5;
var factorial: int = 1;

while (counter > 1) {
    factorial *= counter;
    counter--;
}

Printf("Factorial = %d", factorial);
with Ada.Integer_Text_IO;

procedure Factorial is
    Counter   : Integer := 5;
    Factorial : Integer := 1;
begin
    while Counter > 0 loop
        Factorial := Factorial * Counter;
        Counter   := Counter - 1;
    end loop;

    Ada.Integer_Text_IO.Put (Factorial);
end Factorial;
counter  5
factorial  1

:While counter > 0
    factorial × counter
    counter - 1
:EndWhile

  factorial

or simply

!5

AutoHotkey

edit
counter := 5
factorial := 1

While counter > 0
    factorial *= counter--

MsgBox % factorial

Small Basic

edit
counter = 5    ' Counter = 5
factorial = 1  ' initial value of variable "factorial"

While counter > 0
    factorial = factorial * counter
    counter = counter - 1
    TextWindow.WriteLine(counter)
EndWhile

Visual Basic

edit
Dim counter As Integer = 5    ' init variable and set value
Dim factorial As Integer = 1  ' initialize factorial variable

Do While counter > 0
    factorial = factorial * counter
    counter = counter - 1
Loop     ' program goes here, until counter = 0

'Debug.Print factorial         ' Console.WriteLine(factorial) in Visual Basic .NET

Bourne (Unix) shell

edit
counter=5
factorial=1
while [ $counter -gt 0 ]; do
    factorial=$((factorial * counter))
    counter=$((counter - 1))
done

echo $factorial

C, C++

edit
int main() {
    int count = 5;
    int factorial = 1;

    while (count > 1)
        factorial *= count--;

    printf("%d", factorial);
}

ColdFusion Markup Language (CFML)

edit

Script syntax

edit
counter = 5;
factorial = 1;

while (counter > 1) {
    factorial *= counter--;
}

writeOutput(factorial);

Tag syntax

edit
<cfset counter = 5>
<cfset factorial = 1>
<cfloop condition="counter GT 1">
    <cfset factorial *= counter-->
</cfloop>
<cfoutput>#factorial#</cfoutput>

Fortran

edit
program FactorialProg
    integer :: counter = 5
    integer :: factorial = 1

    do while (counter > 0)
        factorial = factorial * counter
        counter = counter - 1
    end do

    print *, factorial
end program FactorialProg

Go has no while statement, but it has the function of a for statement when omitting some elements of the for statement.

counter, factorial := 5, 1

for counter > 1 {
	counter, factorial = counter-1, factorial*counter
}

Java, C#, D

edit

The code for the loop is the same for Java, C# and D:

int counter = 5;
int factorial = 1;

while (counter > 1)
    factorial *= counter--;

JavaScript

edit
let counter = 5;
let factorial = 1;

while (counter > 1)
    factorial *= counter--;

console.log(factorial);
counter = 5
factorial = 1

while counter > 0 do
  factorial = factorial * counter
  counter = counter - 1
end

print(factorial)

MATLAB, Octave

edit
counter = 5;
factorial = 1;

while (counter > 0)
    factorial = factorial * counter;      %Multiply
    counter = counter - 1;                %Decrement
end

factorial

Mathematica

edit
Block[{counter=5,factorial=1},  (*localize counter and factorial*)
    While[counter>0,            (*While loop*)
        factorial*=counter;     (*Multiply*)
        counter--;              (*Decrement*)
    ];

    factorial
]

Oberon, Oberon-2, Oberon-07, Component Pascal

edit
MODULE Factorial;
IMPORT Out;
VAR
    Counter, Factorial: INTEGER;
BEGIN
    Counter := 5;
    Factorial := 1;

    WHILE Counter > 0 DO
        Factorial := Factorial * Counter;
        DEC(Counter)
    END;

    Out.Int(Factorial,0)
END Factorial.

Maya Embedded Language

edit
int $counter = 5;
int $factorial = 1;

int $multiplication;

while ($counter > 0) {
    $multiplication = $factorial * $counter;

    $counter -= 1;

    print("Counter is: " + $counter + ", multiplication is: " + $multiplication + "\n");
}
var
  counter = 5            # Set counter value to 5
  factorial = 1          # Set factorial value to 1

while counter > 0:       # While counter is greater than 0
    factorial *= counter # Set new value of factorial to counter.
    dec counter          # Set the counter to counter - 1.

echo factorial

Non-terminating while loop:

while true:
  echo "Help! I'm stuck in a loop!"

Pascal

edit

Pascal has two forms of the while loop, while and repeat. While repeats one statement (unless enclosed in a begin-end block) as long as the condition is true. The repeat statement repetitively executes a block of one or more statements through an until statement and continues repeating unless the condition is false. The main difference between the two is the while loop may execute zero times if the condition is initially false, the repeat-until loop always executes at least once.

program Factorial1;
var
    Fv: integer;

    procedure fact(counter:integer);
    var
        Factorial: integer;

    begin
         Factorial := 1;

         while Counter > 0 do
         begin
             Factorial := Factorial * Counter;
             Counter := Counter - 1
         end;

         WriteLn(Factorial)
     end;

begin
    Write('Enter a number to return its factorial: ');
    readln(fv);
    repeat
         fact(fv);
         Write('Enter another number to return its factorial (or 0 to quit): ');
     until fv=0;
end.

Perl

edit
my $counter   = 5;
my $factorial = 1;

while ($counter > 0) {
    $factorial *= $counter--; # Multiply, then decrement
}

print $factorial;

While loops are frequently used for reading data line by line (as defined by the $/ line separator) from open filehandles:

open IN, "<test.txt";

while (<IN>) {
    print;
}

close IN;
$counter = 5;
$factorial = 1;

while ($counter > 0) {
    $factorial *= $counter--; // Multiply, then decrement.
}

echo $factorial;

PL/I

edit
declare counter   fixed initial(5);
declare factorial fixed initial(1);

do while(counter > 0)
    factorial = factorial * counter;
    counter = counter - 1;
end;

Python

edit
counter = 5                           # Set the value to 5
factorial = 1                         # Set the value to 1

while counter > 0:                    # While counter(5) is greater than 0
    factorial *= counter              # Set new value of factorial to counter.
    counter -= 1                      # Set the counter to counter - 1.

print(factorial)                      # Print the value of factorial.

Non-terminating while loop:

while True:
    print("Help! I'm stuck in a loop!")

Racket

edit

In Racket, as in other Scheme implementations, a named-let is a popular way to implement loops:

#lang racket
(define counter 5)
(define factorial 1)
(let loop ()
    (when (> counter 0)
        (set! factorial (* factorial counter))
        (set! counter (sub1 counter))
        (loop)))
(displayln factorial)

Using a macro system, implementing a while loop is a trivial exercise (commonly used to introduce macros):

#lang racket
(define-syntax-rule (while test body ...) ; implements a while loop
    (let loop () (when test body ... (loop))))
(define counter 5)
(define factorial 1)
(while (> counter 0)
    (set! factorial (* factorial counter))
    (set! counter (sub1 counter)))
(displayln factorial)

However, an imperative programming style is often discouraged in Scheme and Racket.

Ruby

edit
# Calculate the factorial of 5
i = 1
factorial = 1

while i <= 5
  factorial *= i
  i += 1
end

puts factorial

Rust

edit
fn main() {
    let mut counter = 5;
    let mut factorial = 1;

    while counter > 1 {
        factorial *= counter;
        counter -= 1;
    }

    println!("{}", factorial);
}

Smalltalk

edit

Contrary to other languages, in Smalltalk a while loop is not a language construct but defined in the class BlockClosure as a method with one parameter, the body as a closure, using self as the condition.

Smalltalk also has a corresponding whileFalse: method.

| count factorial |
count := 5.
factorial := 1.
[count > 0] whileTrue:
    [factorial := factorial * count.
    count := count - 1].
Transcript show: factorial

Swift

edit
var counter = 5                 // Set the initial counter value to 5
var factorial = 1               // Set the initial factorial value to 1

while counter > 0 {             // While counter(5) is greater than 0
    factorial *= counter        // Set new value of factorial to factorial x counter.
    counter -= 1                // Set the new value of counter to  counter - 1.
}

print(factorial)                // Print the value of factorial.
set counter 5
set factorial 1

while {$counter > 0} {
    set factorial [expr $factorial * $counter]
    incr counter -1
}

puts $factorial
int counter = 5;
int factorial = 1;

while (counter > 1)
    factorial *= counter--;

printf("%d", factorial);

PowerShell

edit
$counter = 5
$factorial = 1

while ($counter) {
    $factorial *= $counter--
}

$factorial

While (language)

edit

While[3] is a simple programming language constructed from assignments, sequential composition, conditionals, and while statements, used in the theoretical analysis of imperative programming language semantics.[4][5]

C := 5;
F := 1;

while (C > 1) do
    F := F * C;
    C := C - 1;

See also

edit

References

edit
  1. ^ a b "The while and do-while Statements (The Java Tutorials > Learning the Java Language > Language Basics)". Dosc.oracle.com. Retrieved 2016-10-21.
  2. ^ "while (C# reference)". Msdn.microsoft.com. Retrieved 2016-10-21.
  3. ^ "Chapter 3: The While programming language" (PDF). Profs.sci.univr.it. Retrieved 2016-10-21.
  4. ^ Flemming Nielson; Hanne R. Nielson; Chris Hankin (1999). Principles of Program Analysis. Springer. ISBN 978-3-540-65410-0. Retrieved 29 May 2013.
  5. ^ Illingworth, Valerie (11 December 1997). Dictionary of Computing. Oxford Paperback Reference (4th ed.). Oxford University Press. ISBN 9780192800466.