Laccaic acid

The word varnish goes back to the old Indian Sanskrit word laksha, meaning a hundred thousand lice, and came into German via the Italian “lacca” in the 16th century. The word also exists in Hindi (Lakh) and Sinhala (Lakda). The term Lac Dye comes from English "dye" means paint dye. This pigment is mostly found in South and South-East Asia.

Laccaic acids are mainly used to dye natural fabrics (mostly silk, wool, or cotton) and food, including both drinks and solid products.^[4] It is one of the most common natural dyes, but it is less used in cosmetics than carmine, the main natural dye used in this industry.  The bright red colorant gives a lightfast tint to silk and wool. It is a similar color to dyes obtained from cochineals and kermes. The color of the dye can be modified by the choice of mordant from violet to red to brown. The use of lac dye can be traced back to 250 AD when it was mentioned by Claudius Aelianus, a Roman writer on a volume about natural history. This pigment made from lac dye, Indian Lake, was listed by Winsor & Newton in their 1896 catalogue.  

These derivatives differ through one ramification except for the acid D, which is closer in form to the kermesic acid. Acid laccaic D can be confused or interchanged with flavokermisic acid due to their almost identical structure.^[5] These acids can all be represented in a general form (lac-dye), where the derivative A is the most important.

The different derivatives include:

Acid B (3,5,6,8-tetrahydroxy-7-[2-hydroxy-5-(2-hydroxyethyl)phenyl]-9,10-dioxoanthracene-1,2-dicarboxylic acid)^[6]

Acid C (7-[5-(2-amino-2-carboxyethyl)-2-hydroxyphenyl]-3,5,6,8-tetrahydroxy-9,10-dioxoanthracene-1,2-dicarboxylic acid)^[7]

Acid D (3,6,8-trihydroxy-1-methyl-9,10-dioxoanthracene-2-carboxylic acid)^[8]

Acid E (7-[5-(2-aminoethyl)-2-hydroxyphenyl]-3,5,6,8-tetrahydroxy-9,10-dioxoanthracene-1,2-dicarboxylic acid)^[9]

Laccaic acids
Name	Laccaic acid A	Laccaic acid B	Laccaic acid C	Laccaic acid D	Laccaic acid E
Structure
Molecular formula	C26H19NO12	C24H16O12	C25H17NO13	C16H10O7	C24H17NO11
Molecular weight	537.44 g/mol	496.38 g/mol	539.41 g/mol	314.25 g/mol	495.40 g/mol
CAS number	15979-35-8	17249-00-2	23241-56-7	18499-84-8	14597-16-1
	60687-93-6 (A-E mix)

Laccaic acid A has an amide functional group in its structure while the acids B, C, and E have amine groups.^[10] The only difference between the acid D and kermesic acid is a hydroxide function missing on the position 8.

Acids A, B, C, and E can be isolated from lac dye through many different ways: microwave induced from lac insects, high speed counter-current chromatography or liquid chromatography-mass spectrometry.^[11][12][13]

 

The stick lac collected from Rain trees (mostly located in Asia) can be powdered in a mill and finely ground. The powdered material is extracted with deionized water at 60°C for 1 h. The aqueous solution is filtered and then concentrated under reduced pressure in a rotary evaporator to give a crude lac dye extract, which can then be used without further purification. This extract can be directly named lac dye.^[14]

 

Grind the body with the appropriate amount of water, then use 4-5 times the original amount of water for extraction several times. Centrifuge to remove all slag, then add a small amount of sodium hydroxide and calcium chloride solution to the extract, then add dilute chloric acid. The pH slowly adjusts to 2.1. Let stand for 3-4 hours, clean and filter. Concentrated sulfuric acid is added to the filtrate until the pigment crystals precipitate, filtered through spun silk (~0.12 mm), the filtrate is allowed to stand for 1-2 days, and then the pigment crystals are precipitated, filtered and washed 3 times by water , dried crush and sift at 60 °C, resulting in a final product with a degree of separation of ~0.8%.

After the dye washing of the wastewater from the shellac cleaning, the pH value of the solution is adjusted to 4.0-4.5 with dilute hydrochloric acid. The supernatant is taken for filtration after standing for 4 hours, the pH of the filtrate is adjusted to 5.5-6.0 with a dilute alkaline solution, then a saturated calcium chloride solution is added to precipitate calcium-lac acid. After 8 hours of clarification . The supernatant is removed, the precipitate is filtered, after filtration, concentrated hydrochloric acid is added, washed with water until the acid is no longer present, and dried to obtain the final lac red pigment.^[15]

DNMT1 is inhibited by LCA which has a stronger inhibitory effect than SG-1027 (HY-13962). LCA is a class of DNMT inhibitors may be a useful mechanism to inhibit DNMT.^[16]

 As a major component of lac dye, LCA is usually chosen as a representative for the lac dye to describe their thermodynamics properties including adsorption, dyeability, fastness and shade variation of lac dyeing on silk and cotton. Studies indicate that the intermolecular interactions between LCA and fibers as well as between LCA and mordants play a key role on the adsorption and dyeability of lac dye^[17][18]

Lac extract produces purple colors from burgundy to deep purple. The colors are similar to cochineal colors, but warmer, softer and more muted. Lac paint has high light and washing fastness on silk and wool. Only small amounts are needed for medium depth shade. Lac is not so fast in cellulose fibers (plant fibers). Lac is very sensitive to pH, increasing alkalinity will turn the colors plummy purple, while acidity will give bright oranges. However, colors that have been altered by the pH change may turn red again after washing.