Floyd–Rivest algorithm

The Floyd-Rivest algorithm is a divide and conquer algorithm, sharing many similarities with quickselect. It uses sampling to help partition the list into three sets. It then recursively selects the kth smallest element from the appropriate set.

The general steps are:

1. Select a small random sample S from the list L.
2. From S, recursively select two elements, u and v, such that u < v. These two elements will be the pivots for the partition and are expected to contain the kth smallest element of the entire list between them (in a sorted list).
3. Using u and v, partition S into three sets: A, B, and C. A will contain the elements with values less than u, B will contain the elements with values between u and v, and C will contain the elements with values greater than v.
4. Partition the remaining elements in L (that is, the elements in L - S) by comparing them to u or v and placing them into the appropriate set. If k is smaller than half the number of the elements in L rounded up, then the remaining elements should be compared to v first and then only to u if they are smaller than v. Otherwise, the remaining elements should be compared to u first and only to v if they are greater than u.
5. Based on the value of k, apply the algorithm recursively to the appropriate set to select the kth smallest element in L.

By using |S| = Θ(n^2/3 log^1/3 n), we can get n + min(k, n − k) + O(n^2/3 log^1/3 n) expected comparisons. We can get n + min(k, n − k) + O(n^1/2 log^1/2 n) expected comparisons by starting with a small S and repeatedly updating u and v to keep the size of B small enough (O(n^1/2 log^1/2 n) at Θ(n) processed elements) without unacceptable risk of the desired element being outside of B.

The following pseudocode rearranges the elements between left and right, such that for some value k, where left ≤ k ≤ right, the kth element in the list will contain the (k − left + 1)th smallest value, with the ith element being less than or equal to the kth for all left ≤ i ≤ k and the jth element being larger or equal to for k ≤ j ≤ right:

// left is the left index for the interval
// right is the right index for the interval
// k is the desired index value, where array[k] is the (k+1)th smallest element when left = 0
function select(array, left, right, k) is
    while right > left do
        // Use select recursively to sample a smaller set of size s
        // the arbitrary constants 600 and 0.5 are used in the original
        // version to minimize execution time.
        if right − left > 600 then
            n := right − left + 1
            i := k − left + 1
            z := ln(n)
            s := 0.5 × exp(2 × z/3)
            sd := 0.5 × sqrt(z × s × (n − s)/n) × sign(i − n/2)
            newLeft := max(left, k − i × s/n + sd)
            newRight := min(right, k + (n − i) × s/n + sd)
            select(array, newLeft, newRight, k)
        // partition the elements between left and right around t
        t := array[k] 
        i := left
        j := right
        swap array[left] and array[k]
        if array[right] > t then
            swap array[right] and array[left]
        while i < j do
            swap array[i] and array[j]
            i := i + 1
            j := j − 1
            while array[i] < t do
                i := i + 1
            while array[j] > t do
                j := j − 1
        if array[left] = t then
            swap array[left] and array[j]
        else
            j := j + 1
            swap array[j] and array[right]
        // Adjust left and right towards the boundaries of the subset
        // containing the (k − left + 1)th smallest element.
        if j ≤ k then
            left := j + 1
        if k ≤ j then
            right := j − 1

• Quickselect
• Introselect
• Median of medians