[go: up one dir, main page]

The Cyrix 5x86 is a line of x86 microprocessors designed by Cyrix and released on June 5 of 1995.[1][2][3] Cyrix, being a fabless company, had the chips manufactured by IBM. The line came out about 5 months before the more famous Cyrix 6x86. The Cyrix 5x86 was one of the fastest CPUs ever produced for Socket 3 computer systems.[citation needed] With better performance in most applications than an Intel Pentium processor at 75 MHz, the Cyrix Cx5x86 filled a gap by providing a medium-performance processor option for 486 Socket 3 motherboards (which are incapable of handling Intel's Pentium CPUs, apart from the Pentium Overdrive).[citation needed]

Cyrix 5x86
A Cyrix 5x86-100GP Microprocessor
General information
Launched5 June 1995
Marketed by
Common manufacturers
Performance
Max. CPU clock rate100 MHz to 120 MHz
FSB speeds25 MHz to 50 MHz
Cache
L1 cache16 KiB
Architecture and classification
Technology node0.65 μm
Microarchitecture5x86
Instruction setx86-16, IA-32
Physical specifications
Transistors
  • 2 million
Cores
  • 1
Socket
Products, models, variants
Core name
  • M1SC
History
PredecessorCyrix Cx486
SuccessorsMediaGX, Cyrix 6x86
Cyrix 5x86-120GP

The IBM 5x86C is an IBM branded and produced version of the Cyrix-designed Cyrix Cx5x86 CPU. Previous IBM x86 processors, IBM 386SLC and IBM 486SLC, were based on modified Intel designs.

Design

edit

The Cyrix 5x86 processor, codename "M1sc", was based on a scaled-down version of the "M1" core used in the Cyrix 6x86, which provided 80% of the performance for a 50% decrease in transistors over the 6x86 design.[citation needed] It had the 32-bit memory bus of an ordinary 486 processor, but internally had much more in common with fifth-generation processors such as the Cyrix 6x86, the AMD K5, and the Intel Pentium, and even the sixth-generation Intel Pentium Pro.[citation needed] The chip featured near-complete support for i486 instructions, but very limited support for Pentium instructions.[citation needed] Some performance-enhancing features of the CPU were intentionally disabled due to potentially stability-threatening bugs which were not fixed before release time (these features can be enabled with freely downloadable software utilities; see below).[4]

The similarly named SGS-Thomson (STMicroelectronics) ST5x86 and IBM 5x86C were licensed rebrandings of the Cyrix design (IBM and ST physically produced Cyrix's CPUs for them), marketed separately but identical for practical purposes, apart from the availability of a 75 MHz edition which Cyrix did not bring to market, and slight differences in voltage requirements. The Cyrix 5x86 design, however, should not be confused with the similarly named AMD Am5x86 which was essentially a clock-quadrupled 486 (not an all-new design like the Cyrix part) but which had broadly similar performance, used the same Socket 3, and was introduced at the end of the same year.

Cyrix's 5x86 was a very short-lived chip, having a market life of only six months. It is likely Cyrix could have continued to successfully sell processors based on Socket 3, but canned the 5x86 so that it would not compete with its then new 6x86 offerings.

STMicroelectronics ST5x86-100.
The IBM 5x86 with blue heatsink.

Controversies and anomalies

edit

The official Cyrix 5x86 website boasted about several features of the chip that were disabled by default in the final versions. The most controversial of these features was the branch prediction feature, which was enabled in the benchmarks results on the company website when comparing the chip to Intel's Pentium processor. While it was possible to enable the extra features using a special software utility, it usually resulted in an unstable system, especially on earlier steppings of the chip when running 32-bit code.

There are also many rumours surrounding a 133 MHz, clock-quadrupled version of the Cyrix 5x86. The 133 MHz version is very rare, however, and producers of upgrade kits were given preferential access to it, notably Gainbery. Some of the 100 and 120 MHz parts also contain support for the 4X multiplier setting, and some of these chips may also work at 133 MHz. However, the 5x86 is not known to overclock well; 120 MHz is generally considered to be pushing the limitations of the process on which it was fabricated. An 80 MHz (2×40 MHz) 5x86 also exists, but is unclear as to whether or not it was ever officially released.

IBM's 5x86C was considered to be more conservatively rated than the Cyrix branded parts, and operated at a lower voltage (3.3V). For example: what Cyrix would rate as a 100 MHz part, IBM would mark as 75 MHz. IBM 5x86C was available as 75 MHz and 100 MHz parts. A few examples of 120 MHz parts also exist, but they have early production dates indicating that they may have been produced prior to IBM's decision to scale back clock speeds. 5x86C also had a much longer production run than the Cyrix branded parts. IBM continued to produce 5x86C at least until late 1998 (QFP only), whereas Cyrix's own part was discontinued in 1996. Parts which implement the 4X multiplier or Stepping 1 Rev 3 cores are not known to exist.

Specifications

edit
 
The Cyrix 5x86 architecture.
 
A die shot of Cyrix 5x86.

100 MHz capable edition for 33 MHz (33×3), and 50 MHz (50×2) front side bus
100 MHz capable edition for 33 MHz (33×3), and 25 MHz (25×4) front side bus
120/133 MHz capable edition for 40 MHz (40×3) and 33 MHz (33×4) front side bus.[5]

References

edit
  1. ^ "CYRIX SET TO RELEASE ITS 100-MHZ M1SC CHIP". InfoWorld. 5 June 1995. p. 3. Retrieved 30 April 2022.
  2. ^ "Cyrix Unveils M1sc As 5x86™ Processor Family". Cyrix. 5 June 1995. Archived from the original on 21 December 1996.
  3. ^ Crothers, Brooke; Uimmonen, Terho (12 June 1995). "Chip race heats up at Computex". InfoWorld. InfoWorld Media Group, Inc. p. 32. ISSN 0199-6649. Retrieved 30 April 2022.
  4. ^ Kozierok, Charles (16 March 2018). "Cyrix 5x86 CPU". The PC Guide. Retrieved May 29, 2019.
  5. ^ "Cyrix 5x86 Images". The CPU Shack Museum. Retrieved May 29, 2019.
edit