[go: up one dir, main page]
Wikipedia

Crashworthiness

Crashworthiness is the ability of a structure to protect its occupants during an impact. This is commonly tested when investigating the safety of aircraft and vehicles. Different criteria are used to figure out how safe a structure is in a crash, depending on the type of impact and the vehicle involved. Crashworthiness may be assessed either prospectively, using computer models (e.g., RADIOSS, LS-DYNA, PAM-CRASH, MSC Dytran, MADYMO) or experiments, or retrospectively, by analyzing crash outcomes. Several criteria are used to assess crashworthiness prospectively, including the deformation patterns of the vehicle structure, the acceleration experienced by the vehicle during an impact, and the probability of injury predicted by human body models. Injury probability is defined using criteria, which are mechanical parameters (e.g., force, acceleration, or deformation) that correlate with injury risk. A common injury criterion is the head impact criterion (HIC). Crashworthiness is measured after the fact by looking at injury risk in real-world crashes. Often, regression or other statistical methods are used to account for the many other factors that can affect the outcome of a crash.

Airbag on a Bell OH-58 Kiowa helicopter

History

edit

Aviation

edit

The history of human tolerance to deceleration can likely be traced to the studies by John Stapp to investigate the limits of human tolerance in the 1940s and 1950s. In the 1950s and 1960s, the Pakistan Army began serious accident analysis into crashworthiness as a result of fixed-wing and rotary-wing accidents. As the US Army's doctrine changed, helicopters became the primary mode of transportation in Vietnam. Due to fires and the forces of deceleration on the spine, pilots were getting spinal injuries in crashes that they would have survived otherwise. Work began to develop energy-absorbing seats to reduce the chance of spinal injuries[1] during training and combat in Vietnam. A lot of research was done to find out what people could handle, how to reduce energy, and how to build structures that would keep people safe in military helicopters.[2][3] The primary reason is that ejecting from or exiting a helicopter is impractical given the rotor system and typical altitude at which Army helicopters fly. In the late 1960s, the Army published the Aircraft Crash Survival Design Guide.[4] The guide was changed several times and turned into a set of books with different volumes for different aircraft systems. The goal of this guide is to show engineers what they need to think about when making military planes that can survive a crash. Consequently, the Army established a military standard (MIL-STD-1290A) for light fixed- and rotary-wing aircraft.[5] The standard sets minimum requirements for the safety of human occupants in a crash. These requirements are based on the need to keep a space or volume that can be used for living and the need to reduce the deceleration loads on the occupant.[6]

Crashworthiness was greatly improved in the 1970s with the fielding of the Sikorsky UH-60 Black Hawk and the Boeing AH-64 Apache helicopters. Primary crash injuries were reduced, but secondary injuries within the cockpit continued to occur. This led to the consideration of additional protective devices such as airbags. Airbags were considered a viable solution to reducing the incidents of head strikes in the cockpit, in Army helicopters.

Regulatory agencies

edit

The National Highway Traffic Safety Administration, the Federal Aviation Administration, the National Aeronautic and Space Administration, and the Department of Defense have been the leading proponents for crash safety in the United States. They've each come up with their own official safety rules and done a lot of research and development in the field.

See also

edit

References

edit
  1. ^ The Evolution of Energy Absorption Systems for Crashworthy Helicopter Seats by Stan Desjardins, paper at 59th AHS Forum
  2. ^ Human Tolerance and Crash Survival Archived May 17, 2011, at the Wayback Machine - Shanahan (NATO)
  3. ^ "History of Full-Scale Aircraft and Rotorcraft Crash Testing". CiteSeerX 10.1.1.75.1605. {{cite web}}: Missing or empty |url= (help)
  4. ^ Aircraft Crash Survival Design Guide Volume 1
  5. ^ Military Standard for Light Fixed and Rotary-Wing Aircraft Archived 2011-09-27 at the Wayback Machine
  6. ^ Aircraft Crashworthiness Research Program - FAA

Further reading

edit
edit
Retrieved from "https://en.wikipedia.org/w/index.php?title=Crashworthiness&oldid=1183778754"