BRM P351

In 1990, an agreement was reached between entrepreneur John Mangoletsi and the family of British Racing Motors (BRM) founder Alfred Owen, who had retained the naming rights to the company even after it had ceased to exist. The use of the BRM name would help Mangoletsi's project gain sponsorship and funding by appearing as a manufacturer entry against the likes of Toyota, Peugeot and Mazda in the World Sportscar Championship.

With the backing of BRM, Mangoletsi turned to former Zakspeed chief engineer Paul Brown to design the car. Brown was employed at the time by Airflow Management and had extensive experience of state-of-the-art sportscar design, having previously been involved with update work on the Porsche 962 for Porsche Motorsport North America and a sportscar project for General Motors that did not come to fruition.^[1][2] Brown produced a conventional carbon composite monocoque Group C chassis, which although technically unremarkable was well regarded by those who drove it for its excellent handling. The composite chassis of the car was constructed for the team by the engineering firm Courtaulds and finished in a metallic british racing green with BRM's traditional orange nose. The engine was designed by Graham Dale-Jones and built by Terry Hoyle's JHS company using a block derived from the Weslake V12 Grand Prix unit.^[3] It was branded as a 'BRM'. Claimed output was 626 hp (467 kW) at 11300 rpm but it proved to be uncompetitive and unreliable. Dale-Jones virtually redesigned the V12 which actually exceeded its performance targets and further validation work on the engine was carried out by Ricardo Engineering.

A model of the BRM P351 was exhibited at the Autosport Racing Car Show in January 1991 and the complete car was unveiled in London’s Science Museum in November of 1991.

A second chassis was planned to be completed in order to start the 1992 season but was never built.

The car had a brief test at Snetterton, where no more than 30 laps were completed.

The BRM P351 debuted at the 1992 500km of Silverstone, the second round of the World Sportscar Championship. The drivers assigned were Wayne Taylor and Harri Toivonen. After problems in qualifying with a battery, the car was forced to take the last qualifying position. Unfortunately, the car suffered more problems on Sunday when during pre-race warm-up the oil pump failed and the car never took the race start.

The team moved next to the 24 Hours of Le Mans, where Richard Jones was added to the driver line-up. On both days of qualifying the car suffered transmission difficulties, with Wayne Taylor being the only driver to set a time. This was however good enough for 23rd place in the field of 29. However yet again problems struck early for the P351. Although the car did make the start, it suffered transmission failure after a mere twenty laps, the first car out of the race.

In an attempt to find sponsorship elsewhere, the team transferred the P351 to the United States to participate in an IMSA Camel GT round at Watkins Glen International. Although the team believed that the chassis met all of the IMSA regulations, it was discovered at the first scrutineering session that the car was in violation of the series' maximum height restriction due to the tall roof mounted air intake. At the suggestion of designer Paul Brown, the intake was promptly removed with a Sawzall, split down the middle and remounted with the two halves of the intake on their sides, forming a new intake with the same cross-section and lowering the car enough to meet the regulations. Unfortunately the car still suffered from its poor reliability record, succumbing to electrical failure after a mere five laps.

After these three failed race attempts, money for the project was beginning to run out as sponsorship was not forthcoming. The team returned the P351 to Europe and entered the next World Sportscar Championship round at Donington Park, but never appeared. After this, the team pulled out of the World Sportscar Championship for good and the team folded.

To satisfy the team and all the industry supporters, team manager Ian Dawson carried out a 1,000-mile test to prove the true capabilities of the P351. A new camshaft profile was developed to address the only observation in all of Ricardo’s tests that valve spring surge could occur between 10,500 and 11,000 rpm. By this time all the relatively minor problems that had been encountered, primarily with bought-in ancillary components, had been resolved and the car ran faultlessly.

The BRM was returned to Rubery Owen who kept it in storage for three years.

BRM P301

Category	Sports car racing
Constructor	British Racing Motors Pilbeam Racing Designs
Technical specifications
Chassis	Carbon monocoque
Suspension (front)	Unequal length double wishbone
Suspension (rear)	Unequal length double wishbone
Engine	Nissan 3000cc V6. twin-turbocharged mid-mounted
Transmission	6-speed manual transmission
Tyres	Pirelli (1997) Dunlop (1998)
Competition history
Notable entrants	Pacific Racing
Notable drivers	Franz Konrad (1997)   Richard Dean (1997)   Wido Rössler (1997)   Eliseo Salazar (1997)   Jésus Pareja (1997)   Harri Toivonen (1997)   Tim Sugden (1998)   Grant Orbell (1998)   William Hewland (1998)
Debut	1997 FIA Sportscar Championship Donington
Last season	1998
Races Wins Poles F/Laps 4 0 0 0
Constructors' Championships	0
Drivers' Championships	0

In 1996, the stored P351 chassis was bought by Keith Wiggins, founder of Pacific Racing. Following Pacific's failed attempts at Formula One and Formula 3000, Wiggins decided to enter the team in sports car racing, planning on the new International Sportscar Racing Series that would debut in 1997.

In order to conform to new sports prototype rules which had been developed since the demise of Group C in 1994, the car was heavily modified from its original form with the help of Pilbeam Racing Designs. First and foremost the car's roof was removed in order to create a true two-seater open cockpit design. This required the installation of a rollbar in order to not only allow for driver safety, but also make up for the loss of chassis rigidity. The car's Weslake V12 was also no longer legal, requiring Pacific to turn to a twin-turbocharged Nissan 3.0L V6 used in IMSA. The unit required the addition of two inlets to the upper bodywork to serve as air intakes for the turbochargers. The car was completed and began testing at Snetterton in the hands of driver William Hewland.

Although the car was not connected with British Racing Motors anymore, the car would retain the BRM name as that is the company considered to have constructed the original chassis. Pacific could have renamed the chassis after its extensive modifications but decided instead to keep the BRM name alive.

The car made its competition debuted at the opening ISRS round at Donington Park, being driven by Franz Konrad, Richard Dean and Wido Rössler. The car successfully qualified in 6th place out of the nine entries, but like the P351 it failed to start the race due to electrical problems. With this setback, the team decided to concentrate solely on the 24 Hours of Le Mans and not participate in any more ISRS races. The driver lineup was completely changed from Donington, now consisting of Eliseo Salazar, Jésus Pareja and former P351 driver Harri Toivonen. The P301 set the 34th fastest time out of 48 entries, although it actually placed 19th on the grid. Unfortunately like BRM's Le Mans race in 1992, the P301 would suffer engine problems and drop out after 6 laps, again the first car out of the race.

After a dismal debut in 1997, the P301 would return in 1998, entering the third ISRS round at Misano with yet another new driver line-up of Tim Sugden and Grant Orbell. The car successfully qualified 9th out of the 24 entries, its best qualifying effort ever. This would however be the most success the car would ever have, as it yet again failed to finish after a mere 4 laps. This would be followed by the next round, returning again to Donington, where the car would fail to even take the green flag, and becoming the final race ever for the P301 chassis. The BRM 301 would thus end its career in the same way as the P351 had begun.

Money for the project would run out, and eventually Pacific Racing itself would close, ending the run of the BRM.

• WSPR-Racing BRM chassis index
• BRM Unofficial Information Center - BRM at Le Mans
• Photographs of BRM P351 at Watkins Glen in 1992