The Aloha 32 is a Canadian sailboat that was designed by Mark Ellis as a cruiser and first built in 1979.[1][2][3]
| Development | |
|---|---|
| Designer | Mark Ellis |
| Location | Canada |
| Year | 1979 |
| Builder(s) | Aloha Yachts |
| Name | Aloha 32 |
| Boat | |
| Displacement | 9,800 lb (4,445 kg) |
| Draft | 4.75 ft (1.45 m) |
| Hull | |
| Type | Monohull |
| Construction | Fibreglass |
| LOA | 32.42 ft (9.88 m) |
| LWL | 25.00 ft (7.62 m) |
| Beam | 10.83 ft (3.30 m) |
| Engine type | Westerbeke diesel engine |
| Hull appendages | |
| Keel/board type | fin keel |
| Ballast | 4,018 lb (1,823 kg) |
| Rudder(s) | internally-mounted spade-type rudder |
| Rig | |
| Rig type | Bermuda rig |
| I foretriangle height | 42.00 ft (12.80 m) |
| J foretriangle base | 14.50 ft (4.42 m) |
| P mainsail luff | 36.50 ft (11.13 m) |
| E mainsail foot | 12.00 ft (3.66 m) |
| Sails | |
| Sailplan | Masthead sloop |
| Mainsail area | 219.00 sq ft (20.346 m2) |
| Jib/genoa area | 304.50 sq ft (28.289 m2) |
| Total sail area | 523.50 sq ft (48.635 m2) |
| Racing | |
| PHRF | 171 |
Production
editThe design was built by Aloha Yachts, a brand of Ouyang Boat Works, in Canada from 1979 to 1988, but it is now out of production.[1][3][4]
Design
editThe Aloha 32 is a recreational keelboat, built predominantly of fibreglass, with teak wooden trim. It has a masthead sloop rig, a spooned raked stem, a raised transom, an internally mounted spade-type rudder controlled by a wheel and a fixed fin keel. It displaces 9,800 lb (4,445 kg) and carries 4,018 lb (1,823 kg) of lead ballast. The bow has an anchor chain locker and roller.[1][3]
The boat has a draft of 4.75 ft (1.45 m) with the standard keel and 3.2 ft (0.98 m) with the optional shoal draft keel.[1]
The boat is fitted with a Westerbeke diesel engine 21 hp (16 kW) or a Universal diesel of 16 hp (12 kW). The fuel tank holds 30 U.S. gallons (110 L; 25 imp gal) and the fresh water tank has a capacity of 60 U.S. gallons (230 L; 50 imp gal).[1][3][5]
The design has two interior layouts, one that dispenses with the bow "V"-berth. The galley is located to port, at the bottom of the companionway steps and features foot-pumped water, a single sink and a two-burner kerosene stove. The head is to starboard, opposite the gallery. The cabin sole is teak and holly and the provided interior lockers have cane doors. There are teak battens mounted on the cabin ceiling. There is 76 in (193 cm) of headroom in the main cabin.[3][5]
Ventilation is provided by two large translucent hatches and two small ones, plus six opening, screened posts.[3]
From the factory the boat came with an "Ulmer" mainsail and two genoas, a number 1 and number 3. Reefing, outhaul and halyards are all by internal lines.[3]
Operational history
editA review by Richard Sherwood described the design, "the Aloha is light and should accelerate well. It is primarily a cruiser.[3]
In a review Michael McGoldrick wrote, "Mark Ellis appears to have successfully squeezed in everything from the Niagara 35 into this 32 footer - everything is just a little tighter. Aside from 3 feet in the overall length, the main difference between the two boats is that one was manufactured by Hinterhoeller, and the other by Aloha (two builders who had good reputations)."[5]
See also
editSimilar sailboats
References
edit- ^ a b c d e McArthur, Bruce (2019). "Aloha 32 sailboat". sailboatdata.com. Archived from the original on 19 August 2019. Retrieved 19 August 2019.
- ^ McArthur, Bruce (2019). "Mark Ellis". sailboatdata.com. Archived from the original on 19 August 2019. Retrieved 19 August 2019.
- ^ a b c d e f g h Sherwood, Richard M.: A Field Guide to Sailboats of North America, Second Edition, pages 248-249. Houghton Mifflin Company, 1994. ISBN 0-395-65239-1
- ^ McArthur, Bruce (2019). "Ouyang Boat Works (CAN)". sailboatdata.com. Archived from the original on 19 August 2019. Retrieved 19 August 2019.
- ^ a b c d McGoldrick, Michael (2019). "Aloha 32". Sail Quest. Archived from the original on 6 February 2019. Retrieved 19 August 2019.