Lunge mine
 | This article needs additional citations for verification. (January 2019) |
| Lunge mine | |
|---|---|
 A drawing of a lunge mine and its operation | |
| Type | Suicidal anti-tank mine |
| Place of origin |  Empire of Japan |
| Service history | |
| In service | 1944–1948 |
| Used by | |
| Wars | |
| Production history | |
| Designed | World War II |
| Specifications | |
| Mass | 14.3 lb (6.5 kg) (overall) |
| Length | 78 in (200 cm) (overall) |
| Height | 11.6 in (29 cm) (body) |
| Diameter | 8 in (20 cm) (body) |
| Filling | TNT |
| Filling weight | 6.6 lb (3.0 kg) |
Detonation mechanism | Blasting cap[1] |
The Shitotsubakurai (Japanese: 刺突爆雷) or lunge mine was a suicidal anti-tank weapon developed and used by the Empire of Japan during the Second World War. It used a HEAT type charge. This weapon was used by the CQC units of the Imperial Japanese Army. The weapon itself was a conical hollow charge anti-tank mine, placed inside a metallic container and attached to the end of a wooden stick. The weapon was officially adopted by the Japanese Army in 1944; with the first noted combat use in Leyte in December 1944. [2] During 1945 it caused additional victims in the Pacific Theater, where it commonly saw action against American armour. Later that year, some Japanese Imperial Army manuals of the weapon were discovered by US troops.[1][3]
Design
[edit]The weapon itself was a conical hollow charge attached to one end of the weapon, which was a wooden stick used to hold the weapon during its transport and use. The mine had three equally spaced legs facing forward around the conical explosive base of the weapon. The detonator of the weapon was situated at the end of the conical base.[1] The handle was connected to the mine body with a length of tubing through which it could slide once the safety pin was removed and the copper shear wire broken by impact with the target, at which point the steel striker at its end would be driven into the detonator.[4]
The conical mine body was 11.6 inches (29 cm) long and 8 inches (20 cm) in diameter at its base, weighing 11 pounds (5.0 kg) including the 6.6 pounds (3.0 kg) of crude TNT filling. The three metal legs welded to it were 6 inches (15 cm) long, intended to ensure the proper stand-off distance for the shaped charge to achieve maximum penetration. The 1.25-inch (3.2 cm) diameter handle was 59 inches (150 cm) long and weighed 3.3 pounds (1.5 kg), for an overall length of 78 inches (200 cm) (including the three legs) and weight of 14.3 pounds (6.5 kg).[4]
Operation
[edit]To use the mine, the soldier would remove the security pin, then run towards the enemy armoured vehicle as if making a bayonet charge, and thrust the top of the mine against the target. The weapon needed to be held by the center with the left hand and by the bottom with the other hand. When the legs of the mine hit the objective, the handle was pushed forward, cutting a pin and making the striker move forward to the detonator. This would set off the mine, blowing up its user and, presumably, the targeted enemy armour.[1]
Armour penetration
[edit]The mine was capable of penetrating about 6 inches (150 mm) of RHA at an angle of 90 degrees, and up to 4 inches (100 mm) at an angle of 60 degrees. However, the mine would almost always impact at 90 degrees should an attack be successful, thanks to the fine control of the impact angle afforded by direct, manual handling of the weapon.[5]
Combat record
[edit]The weapon was used by the Imperial Japanese Army during the later stages of the Second World War in the Pacific Theater against American armour.
The Intelligence Bulletin reported in March 1945 that United States forces met this weapon for the first time in Leyte Island, The Philippines, during the 1944 invasion. It also reported that "To date all attempts by the enemy to use the Lunge Mine against our tanks have met with failure" and rates it as "Perhaps the oddest of these antitank charges."[1]
In Vietnam, it became an icon of the First Indochina War, specifically the Battle of Hanoi, during which Platoon Leader Nguyen Van Thieng tried to use it; however, the bombs failed to explode. In the end, he was killed in action.[6]
See also
[edit]Gallery
[edit]-
Schematic of the mines components.
-
Viet Minh soldier Nguyen Van Thieng holding a lunge mine at Hàng Đậu Street in December 1946.
-
Statue of an anti-tank lunge mine being used by Nguyen Van Thieng in 1946. Military History Museum, Hanoi, Vietnam.
References
[edit]- ^ a b c d e "New Weapons for Jap Tank Hunters (U.S. WWII Intelligence Bulletin, March 1945)". Lone Sentry. Archived from the original on 2017-09-29. Retrieved 2017-09-30.
- ^ Ness, Leland. Rikugun: Volume 2 - Weapons of the Imperial Japanese Army & Navy Ground Forces (p. 42).
- ^ "Japanese Anti-Tank Assaults - The Chieftain's Hatch - World of Tanks official forum - Page 5". 2017-09-30. Archived from the original on 2018-07-30. Retrieved 2019-12-14.
- ^ a b Japanese Explosive Ordnance (Bombs, Bomb Fuzes, Land Mines, Grenades, Firing Devices and Sabotage Devices) (PDF) (Report). Washington, D.C.: United States Government Printing Office. 1953. pp. 208–209. Archived from the original (PDF) on 2021-05-09. Retrieved 2021-05-09.
- ^ "WWII Japanese LUNGE MINE.........building a replica??". Archived from the original on 2017-09-29. Retrieved 2017-09-30.
- ^ Explanatory board for replica of lunge mine held by a soldier at Vietnam Military History Museum, Hanoi; verified in December, 2019