[go: up one dir, main page]

Jump to content

Captiva 35

From Wikipedia, the free encyclopedia

Captiva 35
Development
DesignerWalter Scott
LocationUnited States
Year1980
Builder(s)Captiva Yachts
Sovereign Yachts
RoleCruiser
NameCaptiva 35
Boat
Displacement15,100 lb (6,849 kg)
Draft5.17 ft (1.58 m)
Hull
Typemonohull
Constructionfiberglass
LOA34.75 ft (10.59 m)
LWL29.58 ft (9.02 m)
Beam11.67 ft (3.56 m)
Engine typeinboard motor
Hull appendages
Keel/board typefin keel
Ballast4,300 lb (1,950 kg)
Rudder(s)skeg-mounted rudder
Rig
Rig typeBermuda rig
Sails
Sailplanmasthead sloop
Total sail area550.00 sq ft (51.097 m2)

The Captiva 35 is an American sailboat that was designed by Walter Scott as a cruiser and first built in 1980.[1][2][3][4]

The Captiva 35 design was developed into the Allmand 35 in 1981.[1][2][5]

Production

[edit]

The design was built starting in 1980 by Captiva Yachts of Clearwater, Florida and later by Sovereign Yachts of Port Richey, Florida, both in the United States, but it is now out of production.[1][2][6][7][8][9]

Design

[edit]

The Captiva 35 is a recreational keelboat, built predominantly of fiberglass, with wood trim. It has a masthead sloop with aluminum spars, a raked stem, a reverse transom, a skeg-mounted rudder controlled by a wheel and a fixed fin keel. It displaces 15,100 lb (6,849 kg) and carries 4,300 lb (1,950 kg) of ballast.[1][2][10]

The boat has a draft of 5.17 ft (1.58 m) with the standard keel and is fitted with a diesel engine for docking and maneuvering.[1][2][10]

The design has sleeping accommodation for seven people in three cabins. There is a bow cabin with a "V"-berth, a U-shaped dinette in the main cabin that forms a double berth, plus a main cabin single settee berth, and aft cabin with a double berth. The galley is located on the starboard side just forward of the companionway ladder. The galley is L-shaped and is equipped with a three-burner stove and a double sink. A navigation station is opposite the galley, on the port side. The head is located just aft of the bow cabin on the port side and includes a shower. The fresh water tank has a capacity of 95 U.S. gallons (360 L; 79 imp gal)[10]

The design has a hull speed of 7.29 kn (13.50 km/h).[2]

See also

[edit]

References

[edit]
  1. ^ a b c d e McArthur, Bruce (2022). "Captiva 35 sailboat". sailboatdata.com. Archived from the original on 20 February 2022. Retrieved 21 February 2022.
  2. ^ a b c d e f Sea Time Tech, LLC (2022). "Captiva 35". sailboat.guide. Archived from the original on 20 February 2022. Retrieved 21 February 2022.
  3. ^ McArthur, Bruce (2022). "Walter Scott". sailboatdata.com. Archived from the original on 13 February 2021. Retrieved 21 February 2022.
  4. ^ Sea Time Tech, LLC (2022). "Walter Scott". sailboat.guide. Archived from the original on 20 February 2022. Retrieved 21 February 2022.
  5. ^ McArthur, Bruce (2022). "Allmand 35 sailboat". sailboatdata.com. Archived from the original on 20 February 2022. Retrieved 21 February 2022.
  6. ^ McArthur, Bruce (2022). "Captiva Yachts (USA) 1984 - 1988". sailboatdata.com. Archived from the original on 13 February 2021. Retrieved 21 February 2022.
  7. ^ Sea Time Tech, LLC (2022). "Captiva Yachts". sailboat.guide. Archived from the original on 20 February 2022. Retrieved 21 February 2022.
  8. ^ McArthur, Bruce (2022). "Sovereign Yachts (Custom Fiberglass Products) 1978-1998". sailboatdata.com. Archived from the original on 13 February 2021. Retrieved 21 February 2022.
  9. ^ Sea Time Tech, LLC (2022). "Sovereign Yachts". sailboat.guide. Archived from the original on 14 February 2022. Retrieved 21 February 2022.
  10. ^ a b c "Captiva 35". Cruising World. 1985. Retrieved 21 February 2022.