User:B22b
User:Carerra/Userbox/Imprezahate
User:Carerra/Userboxes/ugly This user is a Boxer so don't mess with me. Transclusions
Template:User Starbucks SB This user likes Starbucks. Transclusions
|
i like cheese and i also have a myspace all of my friends have one except bluware he has a face book.Airsoft gun From Wikipedia, the free encyclopedia
(Redirected from Air soft gun)
Jump to: navigation, search
This article needs additional citations for verification. Please help improve this article by adding reliable references. Unsourced material may be challenged and removed. (June 2008)
This article is about airsoft guns. For the sport, see Airsoft.
Classic Army M15A4 S.P.R. AEG with Aimpoint Comp2 Replica Red dot sightAn airsoft gun is a type of gun used for recreational purposes, and firing nonlethal projectiles.
There are three types of airsoft gun: spring, gas and electric. All work on the same principle of compressed gas expanding to force a pellet down the gun's barrel and each type has its own advantages and disadvantages.
A Tokyo Marui M14, Marui MP5A4, G&P M4-CQBR, Jing Gong XM177E2, Galaxy MP5K-PDW, Maruzen M870 BV, Tokyo Marui P226, KSC M92FS Elite IA, Kokusai M10 (2 inch), MGC M1911, Kokusai M10 (4 inch), Tanaka Colt Python (4 inch).Contents [hide]
1 History
2 Types of airsoft guns
2.1 Spring powered
2.1.1 Automatic electric guns
2.1.2 Hybrid guns
2.1.3 Low powered electric guns
2.1.4 Medium Powered electric guns
2.1.5 Electric Blow Backs
2.1.6 Mini electrics
2.1.7 AEP
2.2 Classic guns
3 Sights
4 Magazines
4.1 Standard
4.2 Low capacity (Low-Cap)
4.3 Medium capacity (Mid-Cap)
4.4 High capacity (Hi-Cap)
4.5 Real capacity (Real-Cap)
5 Performance
6 Trademark problems
6.1 House Resolution 607
7 See also
8 References
[edit] History In 1970s Japan it was illegal to own a firearm, but there was a large interest in them. Because of this interest, manufacturers started to produce realistic looking spring-powered guns. These guns fired several calibers of plastic or rubber BBs, but were eventually standardized into 6mm and 8mm sizes. The early spring powered weapons then morphed into gas powered ones, using a variety of systems. The hobby then migrated to North America in the mid 1990s.[1] Then low powered spring guns transformed into Classic airsoft. About ten years after this time, Japan hit a recession just as AEGs, or automatic electric guns, hit the market. Many old manufacturers were lost, leaving Tokyo Marui, inventor of the AEG, as the primary manufacturer. Marui then invented an improved Hop up system, further improving the accuracy and range of the weapons. In the early 2000s, Classic Army of Hong Kong entered the scene and gradually improved its quality of guns until it now rivals Tokyo Marui. A few years later countless Chinese brands have flooded the market with cheap entry level weapons. For an airsoft gun to be legal in the United States, it must have an orange tip.
[edit] Types of airsoft guns
[edit] Spring powered Spring-powered airsoft guns are single-shot devices that use elastic potential energy(EPE) stored in a spring to compress air to launch an airsoft pellet down the barrel of the gun. The user must cock a spring gun prior to each shot. This is typically achieved by pulling back the slide (pistols), bolt (rifles), or the grip on a shotgun, which in turn compresses the spring and makes the gun ready to fire.[2] Because of this, these guns are by definition incapable of automatic or semi-automatic fire. Spring powered airsoft guns are generally not as powerful as gas and electric models, although some spring shotguns and sniper rifles can be very powerful.
While most electric guns also use springs for propulsion of the airsoft pellet, they are not considered to be in the same category as the single-shot spring-powered guns. Low-end spring guns tend to be much cheaper than their electric-powered equivalents due to their simplicity and lack of electrical components (spring assembly, electric motor, battery, and battery charger) and thus are widely available. These guns are less suited for competition because they are at a disadvantage against automatic guns in close combat and do not provide enough accuracy and power for long-range use. There are some exceptions, however, as higher-end spring-powered airsoft rifles can be quite expensive; these guns are typically suited for "marksman" applications in airsoft matches and provide competitive muzzle velocities. Additionally, pump shotguns are sometimes used, especially in CQB (Close Quarters Battle). In colder weather, spring pistols are more reliable than gas-powered pistols (see below) and even the batteries on AEPs (Automatic Electric Pistols) both of which can be adversely affected by extreme cold.
This represents one of the major advantages of spring powered airsoft gun, as it can be fired in any situation, without reliance on an external source of power, such as batteries or gas. The lack of reliance on external power sources causes some players to favor spring powered guns. Spring guns are also less susceptible to the effects of water, where a battery-powered gun could malfunction when wet.
The other major advantage that spring weapons hold over other powered airsoft guns is price. True AEGs can range from $80-$2000[citation needed] and high-end gas pistols generally cost from $80-$200 both of which also require extra equipment; gas, batteries etc. Spring guns tend to not exceed $50, except in cases of high end "sniping" rifles which average out to be around $103-$370 in price. Most players start with a spring pistol as their first airsoft weapon, which will usually cost about $10-$30. They are also more readily available in most department stores. Because of their price, spring guns tend to act as "training guns" to bring new players to airsoft games and are considered the primary weapon of "backyard skirmishes." Almost all airsoft players at some point owned a spring weapon, whether for its actual use in the sport or for the replica value since some airsoft weapons are only available as spring versions.
There are many types of electric guns the problem is that when you need to charge your battery you can only have it on the charger 2 to 3 hours (depending on manufacturer)or it will overcharge.
[edit] Automatic electric guns
An AEG modeled after an AK-47Electric-powered airsoft guns typically use a rechargeable battery to drive an electric motor, which cycles an internal piston/spring assembly in order to launch pellets. Automatic and semi-automatic operation is possible which gives these guns the popular name "automatic electric guns" or AEGs[3]. These guns often attain muzzle velocities between 150 and 500 ft/s (60 to 150 m/s) and rates of fire of between 100 and 2000 rounds per minute. They are the most commonly used and widely available type of airsoft gun.
These type of guns were developed in Japan and the Japanese company Tokyo Marui dominates the market. In a Tokyo Marui AEG, the motor drives a series of 3 gears mounted inside a gearbox. The gears then compress a piston assembly against a spring. Once the piston is released, the spring drives it forward through the cylinder to push a pellet into the chamber, through the barrel, and forward from the muzzle. Many manufacturers have now more or less replicated this basic model, adding reinforced parts or minor improvements.
An illustration of the gearbox's workings
Jing Gong Steyr AUG AEGThese guns are powered primarily by nickel cadmium (NiCd) or nickel metal hydride (NiMH) with varying voltages and milliampere hours ratings. The most common battery is an 8.4 V large battery (usually about 2400 mA•h.) Also available are 8.4 V "mini" batteries, which generally have 900-1700 mA•h capacities. Voltages for large batteries range from 7.2 V, all the way up to 12 V. The rule of thumb usually is the higher the mAh, the longer the battery lasts while the higher voltage, the higher Rate of Fire (RoF). However, Now, (Li-po) or Lithium-Polymer are just coming into the airsoft world. These battery can last long and have higher mAh and Volts while at the same time, being small and light. (Li-po) batteries are usually at 11.1 V and At varying mAh from 500 mAh to 2400 mAh.
External modifications, such as metal bodies and reinforced plastics that make AEGs look and feel even more realistic, have become very popular. AEG manufacturers such as Classic Army and Tokyo Marui produce replicas that are visually nearly identical to their real counterparts. Tokyo Marui, however, sticks with a durable ABS plastic where as Classic Army features full metal bodied guns and stronger furnishings. Most AEGs produced as of late are designed to be as visually realistic as possible.
The two most common AEGs fielded by players are the AR-15 series (M16 rifle, M4 carbine, etc.; sometimes referred to as the Armalite or Colt series) and the Heckler & Koch MP5 series, because parts for repairs or modifications/customization are commonly available. Also popular are the AK or Kalashnikov, the Heckler & Koch G36 and more recently, the Springfield M14.
[edit] Hybrid guns
Hybrid Airsoft guns are the newest type of airsoft guns on the market, debuting summer 2006. Hybrid airsoft guns are basically standard AEG's with a little extra reality built in. The magazine is loaded with shell casings, each containing a single plastic pellet. These shell casings can have a small red cap, the same as those found in any child's toy cap gun placed on the top of them. These guns feature an electrically powered, full blowback system and operate on a "round-per-shell" basis such that for every pellet fired, a shell casing is ejected and the cap is fired providing a realistic sound and smoke effect.
[edit] Low powered electric guns
KWA selective fire "Boys" Colt Commando electric rifle, approx. 3/4 scale, pictured with .12 gram Crosman ammunition and CybergunCalled low powered electric guns (LPEGs) to distinguish them from the original, more expensive and more powerful AEGs even though their mechanical/electrical design and operation is similar. They are not to be confused with Mini Electrics (described below). Originally they were only of novelty value, often regarded below spring operated guns due to their construction and low velocities. Since there are spring action guns that can notably outperform the true low end LPEGs and can be found at comparable prices, they are generally considered to be better choices.
[edit] Medium Powered electric guns Some companies - like UTG with their popular MP5 and AK-47 models - have improved their quality to such an extent that some models are now considered simply as mid ranged AEGs that are more affordable but still reasonably effective. Among airsofters, these are commonly called middle powered electric guns (MPEGs). Most MPEGs are Chinese copies or 'clones' of designs by full-price manufacturers like Tokyo Marui. As of late 2008 a small number of MPEG brands such as Echo-1/Jing Gong are considered by many to approach the quality and match the performance of the originals, at less than half the price. "Fully-compatible" MPEGs imitate the Marui or Classic Army originals so precisely that standard upgrade parts will work with them, making it possible to hot-rod an MPEG to well beyond stock out-of-the-box AEG performance.
[edit] Electric Blow Backs
Electric Blow Backs, also known as EBBs, are cheap electric guns, mostly modeled after real world pistols, which typically run from four AA batteries or AAA batteries. EBBs generally have a very low muzzle velocity and "blow back" like a Gas Blow Back to simulate the action of a real pistol. Although, there have been airsoft rifles like the Army Armament R85A1 with the electric blowback feature that can fire around 330-360 fps.
[edit] Mini electrics
Recently, the company UHC, well known for its spring guns, began manufacturing a range of electric guns in miniature size that fire only full automatic. They differ from LPEGs in that they are not replicas of real firearms, being miniaturized version of real firearms, mostly made of black or clear plastic.
They have a small ammo capacity, usually between 50 and 100 rounds, but they have good range and functional hop-up. Even among experienced airsofters, they are great for target practice and for kids. They have become very popular in recent years, and are now being manufactured by Tokyo Marui, as well as the Taiwanese company HFC. These “minis,” as they are referred to, are not a viable option in games against AEGs since their small ammo capacity, short range and poor far range accuracy leave their wielder at a large disadvantage. Mini electric guns are able to compete with spring pistols at close ranges however, primarily due to their high rate of fire.
[edit] AEP
Automatic Electric Pistols , abbreviated AEPs, was first introduced by Tokyo Marui in 2005 with their Glock 18C (followed later by a Beretta 93R model). They were the first handguns to incorporate an electric powered system that is capable of fully-automatic operation.
In cold weather, AEPs are often considered better sidearms than gas powered pistols, because batteries are not as badly affected by frigid weather. Gases like CO2 and green gas are stored in liquid form and require heat in order to vaporize. A gas pistol at 10 °F will usually only get one to two usable shots from a full magazine, and these will be at reduced power because of the lowered pressure of the gas.
Because the gearbox and battery are smaller, the velocity of the pellets is relatively slow for airsoft play. The velocity of an AEP is usually between 200 to 280 ft/s (85.3 m/s). However, the advanced hop up units on these new guns tend to compensate for the low power and can produce an effective range comparable to those of an AEG. CYMA has made a clone Glock 18C, which is a lower priced alternative.
An AEP differs from electric blow-backs because the AEP has a fixed slide (in which there is no external movement of the slide during operation), while an EBB attempts to simulate the "blow back" action in the slide experienced in a real pistol or Gas Blow Back (GBB). An AEP, however, has much more power and accuracy.
One of the newer AEP-styled guns is the Marui replica of the Heckler & Koch MP7. It is considerably larger than either of the other guns, and can be upgraded to a much higher power through the use of an external battery, but uses the same system as the AEP, so the classification is ambiguous. It is slightly more powerful than the others and is a suitable choice for CQB (Close Quarter Battle) games due to its small size and decent barrel- to gun-length ratio.
Some semi-automatic pistols can be modified to be automatic pistols. To make them more effective, they often use AA batteries or AAA batteries can be replaced with a 9v battery to make their ROF higher; this procedure, though, can often wear-out the airsoft gun, since a motor typically running from 4 AA/AAA batteries will take 6v to run, and a 9v would therefore put 1.5x as much energy through it.
Due to restrictions on size, either the electric motor or batteries have to occupy space in the hand grip, reducing the available space for a magazine. Because of this no AEP uses a full size magazine found in most gas powered pistols. Many airsoft players find these stick-like plastic magazines too frail and breakable to endure an airsoft skirmish.
In addition, most AEPs are constructed almost entirely of plastic and have a light, toy-like feeling to them.
[edit] Classic guns
Classic airsoft guns are usually older variety airsoft guns which are gas powered. Unlike the gas pistols of today, they can run on either an internal tank using conventional airsoft gas or use an external CO2 tank much like a paintball gun. They generally cost more than the standard AEG but provide a more realistic approach to airsoft. Some models, such as those made by the Sun Project, feature a type of "recoil" provided by these guns. While these guns can become more powerful than AEG's, almost all users operate them at AEG power. These replicas often are fitted with a LRB (Long Range Barrel) instead of a traditional hop-up unit. The LRB turns the entire barrel into a hop-up system, so the pellet can travel much farther without high muzzle energy. The rate of fire on these can be regulated by the amount of air being fed through the system, versus the motor strength of an AEG.
[edit] Sights
Optical sights are fairly common for use on rifles; mostly red dot sights for short-range use, and telescopic sights for longer-range use. These range from inexpensive sights designed for use on pellet guns and .22 rifles, to mid-range sights, usually inexpensive replicas of actual rifle sights (such as replicas of the famous M68 Aimpoint), to actual sights designed for use on rifles, including the EOTech Sights, and the Trijicon ACOG TA01NSN. Most of these sights are mounted on a MIL-STD-1913 Rail.
[edit] Magazines
KSC GLOCK magazines for their gas blowback models. Interesting features: the valve up top which releases gas when depressed by the hammer, and the lack of GLOCK logo on the right-hand magazine, as it came with a KWA GLOCKMagazines are usually realistic looking replicas of real firearm's magazines and as such are made of the same materials like stamped metal or high impact plastic. They occasionally feature markings and/or engravings that match or mimic their real counterparts.
Gas blowback magazines are usually made out of thicker metal, since they contain compressed gas to power the guns as well as the pellets. The magazines usually have a valve on the bottom that is used to charge its internal cylinder with gas. They are designed to be similar in weight to a fully loaded magazine from a real firearm.
Airsoft magazines are divided into the following classes according to the number of pellets they hold:
[edit] Standard
These type of magazines aren't classified according to their capacity (in some cases up to 300 rounds), but by the fact that they are the standard unmodified magazines originally included with the weapon itself. They are normally loaded by inserting pellets down a shaft, compressing a spring held inside that will later feed the pellets into the gun.
Standard magazines offer quiet operation (no rattle or manual winding of high-capacity magazines) and are sometimes the only alternative available for certain airsoft gun models. They are also useful to help players limit their ammunition consumption.
Standard magazines almost only come with Tokyo Marui guns whereas some companies like Classic Army or ICS supply high-capacity magazines with their guns. However, most magazines will not feed every single pellet, leaving 2-3 pellets at the end of the magazine or in the feed tube of the hop-up chamber (some players may circumvent this problem by inverting the gun to allow gravity to feed the pellets instead).[citation needed]
[edit] Low capacity (Low-Cap)
Low cap mags hold no more than 100 rounds for AEGs. Low caps are used for players who are interested in a more realistic way than a player who uses mid or high caps. These mags can be used with all AEGS & other electric rifles, and are the only magazines available for pistols. They come standard with guns manufactured by companies such as Tokyo Marui. They are also standard with spring guns unusually.
[edit] Medium capacity (Mid-Cap)
This is a loose category used to describe a type of magazine that has been modified to hold more rounds - usually between 100 and 200.
Mechanically they still function like a standard/locap magazine and as such keep the advantage of quiet operation over high-capacity magazines (that require a winding mechanism), but minimize the disadvantage of a standard magazine's lower number of rounds.
[edit] High capacity (Hi-Cap)
This term is used for all magazines with more capacity than a standard magazine and for rifle hi-caps. They require a manual or battery powered wind or a spring to feed the BBs. For pistols, hi-caps are determined by a high BB capacity but work like a standard magazine. With both types a toothed wheel is rotated to bring pellets from a reservoir, along a track and up into a channel into the gun. With one type this gear is turned manually while in the other a pressure sensitive pad is used to operate a battery powered electrical motor to perform the same function.
These magazines are almost exclusively used in AEG type of guns and the obvious advantages is the greater number of rounds, which can be especially useful for automatic fire. The disadvantage is that the loose pellets can rattle and the noise could reveal a player's position to other competitors. Also, Hi-cap magazines are not allowed at some major airsoft events, where realism is often a prerequisite.
[edit] Real capacity (Real-Cap)
Real-Caps are identical in operation compared to standard magazines, but they carry the same amount of ammunition that the real version of the magazine can carry, which is often much less than the standard magazine, e.g. an M-16 Real-Cap will hold 30 rounds instead of the 68 of a standard magazine. Some ultra-realistic groups require the magazines to be weighted to actual real steel specs, also. [4]
These tend to be used solely by those wanting the most realistic MILSIM ("MILitary SIMulation") games. Again they offer the stealth of no rattling rounds, but their main use is for the realistic qualities.
[edit] Performance
Airsoft guns shoot plastic pellets at velocities from 100 ft/s (30 m/s) for a low-end spring pistol, to 500 ft/s and beyond for heavily-upgraded customized sniper rifles. Most non-upgraded AEGs using the Tokyo Marui system are in the middle, producing velocities from 270 to 300 ft/s (80 to 90 m/s) with the exception of companies such as G&G, G&P, Cybergun, D-boys, Cyma and Jing Gong which manufacture guns that produce velocities of over 328 ft/s (or 1J with a .2g pellet) stock. The internal components of most guns can be upgraded which can increase the pellet velocity significantly. Using heavier pellets (.25g, .3g, etc.) will significantly reduce the gun's muzzle velocity, but can increase accuracy at range and reduce susceptibility to wind drift. Conversely, lighter pellets may travel further but are less accurate. High-velocity AEGs often employ heavier pellets, as the velocity penalty does not affect them as much, while the accuracy benefits remain. Most high-end AEGs, such as Classic Army and Tokyo Marui, should not be loaded with anything lighter than 0.2 g pellets, as the lighter pellets (0.12 g, 0.15 g) are typically made for low-end guns, and are not built to the same quality (such as surface smoothness). The stresses the pellets go under upon firing could shatter lighter or poorly made pellets as they leave the barrel, potentially damaging both the weapon and the target.
Airsoft guns are modified to increase one or more of the following properties: pellet velocity, rate of fire, or reliability. For an electric airsoft gun, the pellet velocity can be increased by simply upgrading the mainspring. Doing this will increase the air pressure subjected to the pellet produced during operation. But due to the higher forces at play, it is advised that other parts should be upgraded together with the mainspring in order to maintain a high level of reliability. The rate of fire is increased by using a battery with a higher voltage, high speed ratio gears and/or a high speed motor. Rates of fire can be increased to over 20 rounds per second with very few upgrades, but with careful selection and extreme modification of gearbox components, rates of fire in excess of 50 rounds per second are not unheard of. In the case of gas guns, a higher pellet velocity can be achieved through the use of different types of gases and/or changing the valve. It must be noted that some gases have detrimental effects to some plastic components inside the airsoft gun.
Airsoft guns can commonly come with mounts or rails on which you can add external accessories. Some common customisations added are flash lights, scopes, lasers etc. Since some airsoft guns have the exact external frame as real guns you can use these external parts meant for real guns, but the opposite does not apply. In no way can an airsoft rifle be modified to shoot real ammunition. In most cases, scopes and flash lights have little effect on the performance of the airsoft gun itself, rather the user's ability to use their gun effectively in different situations. In most cases, add-ons are more for aesthetics rather than performance. However, some scopes must have scope rings (which are not usually included in airsoft gun packages) that are used to mount the higher end scopes to a default rail mount.
[edit] Trademark problems
Some airsoft guns can be such accurate replicas that they violate intellectual property laws (specifically those regarding trademarks), most notably some models from Tokyo Marui bearing Colt or Heckler & Koch trademarks that may not be imported into the United States. Certain companies such as Classic Army or ICS avoid this problem by licensing their replicas from the original manufacturers like ArmaLite or Olympic Arms. Trademark problems are usually avoided through the removal of trademarks with a sander, such as a Dremel, or having them covered up, often with easily-removable colored tape.[citation needed] The airsoft company Cybergun has the trademark rights for a lot of wellknown rifle brands, such as Kalashnikov, Colt, M.A.S., Sig Sauer, Famas, Schmeisser, Thompsen + hand gun brands like Beretta, Uzi, Deasert Eagle, S&W and Taurus.
[edit] House Resolution 607
On January 22, 2007, House Resolution 607: Military Toy Replica Act was sponsored by Rep. Rob Andrews (D-NJ), which states:
Directs the Secretary of Defense to require that any contract entered into or renewed by the Department of Defense include a provision prohibiting the contractor from requiring toy and hobby manufacturers, distributors, or merchants to obtain licenses from, or pay fees to, the contractor for the use of military likenesses or designations on items provided under the contract.
This would mean that airsoft manufacturers producing airsoft guns based on those used by the Department of Defense would not have to pay licensing fees for importation into the United States, allowing legal airsoft versions of U.S. Military guns, with trademarks intact