[go: up one dir, main page]

Jump to content

Yorkfield

From Wikipedia, the free encyclopedia
Yorkfield (microprocessor)
A Core 2 Quad Q9400
General information
Launched2007
Discontinued2011?
CPUID code1067x
Product codeYorkfield: 80580 Yorkfield-6M: 80581 Yorkfield CL: 80584
Performance
Max. CPU clock rate2333 MHz to 3200 MHz
FSB speeds1066 MT/s to 1600 MT/s
Cache
L2 cacheYorkfield: 12 MB
Yorkfield-6M: 6 MB
Architecture and classification
ApplicationDesktop
MicroarchitecturePenryn
Instruction setx64
Physical specifications
Cores
  • 4 (2 cores per die)
Socket
Products, models, variants
Brand names
  • Core 2 Quad Q8xxx
  • Core 2 Quad Q9xxx
  • Core 2 Extreme QX9xxx
  • Xeon 33xx
Variant
  • Penryn QC
History
PredecessorKentsfield
SuccessorsLynnfield (desktops and low-end servers)
Bloomfield (enthusiast and uniprocessor workstation)
Support status
Unsuppoted

Yorkfield is the code name for some Intel processors sold as Core 2 Quad and Xeon. In Intel's Tick-Tock cycle, the 2007/2008 "Tick" was Penryn microarchitecture, the shrink of the Core microarchitecture to 45 nanometers as CPUID model 23, replacing Kentsfield, the previous model.

Like its predecessor, Yorkfield multi-chip modules come in two sizes. The smaller version is equipped with 6MB L2 cache, and is commonly called Yorkfield-6M. The larger version is equipped with 12 MB L2 cache.

The mobile version of Yorkfield is Penryn-QC and the dual-socket server version is Harpertown. The MP server Dunnington chip is a more distant relative based on a different chip but using the same 45 nm Core microarchitecture. The Wolfdale desktop processor is a dual-core version of Yorkfield.

The successors to Yorkfield are the Nehalem based Lynnfield and Bloomfield.

Variants

[edit]
Processor Brand Name Model (list) Cores L2 Cache Socket TDP
Yorkfield Xeon X33x0 4 2×3–2×6 MB LGA 775 65–95 W
Yorkfield-CL X33x3 LGA 771 80 W
Yorkfield-6M Core 2 Quad Q8xxx 2×2 MB LGA 775 65–95 W
Q9x0x 2×3 MB
Yorkfield Q9x5x 2×6 MB
Yorkfield XE Core 2 Extreme QX9xxx 2×6 MB 130–136 W
QX9xx5 LGA 771 150 W

Yorkfield

[edit]

Yorkfield (codename for the Core 2 Quad Q9x5x series and Xeon X33x0 series) features a dual-die quad core design with two unified 6 MB L2 caches; their product code is 80569. They also feature 1333 MT/s FSB and are compatible with the Bearlake chipset.[1] These processors were released in late March 2008 beginning with the Q9300 and Q9450. Yorkfield CPUs were expected to be released in January 2008. The release of Yorkfield, however, was delayed to March 15, 2008. Initially this delay was attributed to an error found in the Yorkfield chip,[2] but later reports claimed that the delay was necessary in order to ensure compatibility with the 4-layer printed circuit boards utilized by many mainstream motherboards.[3] At the Intel Developer Forum 2007, a Yorkfield processor was compared with a Kentsfield processor.[4][5]

Yorkfield-6M

[edit]

Yorkfield-6M (product code 80580) are similar to Yorkfield but are made from two Wolfdale-3M like cores, so they have a total of 6 MB of L2 cache, with 3 MB shared by two cores. They are used in Core 2 Quad Q8xxx with 4 MB cache enabled and Core 2 Quad Q9xxx and Xeon X3320/X3330 processors with all of the 6 MB enabled. Q8xxx processors initially had no support for Intel VT unlike Q9xxx, but later versions all have VT enabled.

Yorkfield XE

[edit]

On November 11, 2007, Intel released the first Yorkfield XE processor, Core 2 Extreme QX9650. It is the first Intel desktop processor to use 45 nm technology and high-k metal gates. Yorkfield features a dual-die quad core design with two unified level-two (L2) caches of 6 MB each. It also features a 1333 MT/s FSB and clock rate of 3 GHz. The processor incorporates SSE4.1 instructions and has total of 820 million transistors on 2x107 mm2 dies. QX9650 and QX9770 both are labeled as product code 80569 like Yorkfield, while QX9775, being made for Dual LGA 771 mainboards, uses product code 80574 like the Xeon X5482 "Harpertown" that it is closely related to.

Yorkfield CL

[edit]

The OEM-only Xeon X33x3 processors with 80 W TDP and product code 80584 are made for LGA 771 like Harpertown but are only supported in single-socket configurations. Like the dual-core Wolfdale-CL processor, these would work in regular Socket 775 mainboards after modification but are typically used in blade servers that otherwise require DP server processors like Wolfdale-DP or Harpertown.

See also

[edit]

References

[edit]
  1. ^ "Second-Generation Quad-Core Chip from Intel to Come in Q3 2007". X-bit labs. Retrieved 2006-10-01.
  2. ^ The Yorkfield delayed – BeHardware
  3. ^ "Mainboards Blamed for Intel's New Quad-Core Microprocessors' Delay". X-bit labs. Retrieved 2008-09-01.
  4. ^ "IDF kickoff: Going after AMD, and beyond". TG Daily. Archived from the original on 2007-04-19. Retrieved 2007-04-18.
  5. ^ "Intel won't launch 45 nm desktop CPUs until 2008?". The Register. Retrieved 2007-03-03.