Manette Bridge

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Manette Bridge" – news · newspapers · books · scholar · JSTOR (December 2015) (Learn how and when to remove this message)

Manette Bridge
Coordinates	47°34′12″N 122°37′14″W / 47.57000°N 122.62056°W / 47.57000; -122.62056
Crosses	Port Washington Narrows
Locale	Bremerton, Washington, USA
Maintained by	Washington Department of Transportation
Characteristics
Design	truss
Material	Steel
Total length	1,573 feet (479 m)
Longest span	321 feet (98 m)
No. of spans	6
Piers in water	4
Clearance above	82 feet (25 m)
History
Construction start	October 1929
Opened	June 21, 1930(first bridge) 2011 (current bridge)
Closed	July 24, 2011
Statistics
Toll	originally $.25/car, $.05/pedestrian, toll-free since 1972
Location

The Manette Bridge was a steel truss bridge that spanned the Port Washington Narrows in Bremerton, Washington, USA. It connected the community of Manette, Washington to downtown Bremerton. Although it is not part of a numbered state highway, it is one of four bridges specifically designated by state law to be maintained by the Washington Department of Transportation.^[1] The bridge was 82 feet (25 m) above the water, and had a horizontal clearance of 321 feet (98 m) between the piers.

Before the bridge was opened in 1930 the trip was made by ferry. Between 1916 and 1930, the Mosquito Fleet ferry Pioneer serviced the crossing between Bremerton and Manette for most of the time. Sometimes the Urania, a passenger-only ferry, filled in. Missing the last ferry meant a long trip around Dyes Inlet through Chico, Silverdale and Tracyton on mostly unimproved roads.

The bridge was built as the Bremerton-Manette Bridge, a toll bridge constructed by the East Bremerton Improvement Club to assist families in commuting from the eastside of Bremerton, Washington to the westside. Locals went door to door selling stock, raising approximately $200,000 for the bridge.

Construction on the bridge began October 1929, by the Union Bridge Company of Portland, Oregon. The bridge was 1,573 ft (479 m) long, 80 ft (24 m) high, and 2 lanes. The bridge opened on June 21, 1930, amid much celebration.^[2] Among those present was Jane Garrison, the 106-year-old granddaughter of Chief Seattle.

Originally the bridge was a toll bridge, with tolls of 25 cents per car, and 5 cents per pedestrian.^[2] The Washington Toll Bridge Authority purchased the bridge in 1937. The tolls generated on the bridge enabled the Washington Toll Bridge Authority to recover the purchase price within a year and a half. The toll was lifted January 28, 1939.^[2] The last person to pay a toll on the bridge was J.C Bartholet, at 3:59 pm that day. At 5:30 pm, State Senator Lulu Haddon (D-Bremerton) cut a symbolic ribbon, opening the bridge to toll-free traffic.^[3]

In 1949, the timber approaches were replaced with concrete and steel components. The entire timber roadway deck was replaced around the same time. The main span thru truss and deck trusses are from the original 1930s bridge.^{[citation needed]} A wider bridge across the Port Washington Narrows, the Warren Avenue Bridge, was opened in 1958 as an alternative to the Manette Bridge.^[2]

The bridge remained toll-free until the nearby Warren Avenue Bridge opened as a toll bridge. Since traffic would use the toll-free Manette Bridge instead, tolls were reinstated from November 25, 1958 to October 24, 1972.

The Manette Bridge, which was first built in 1930, was listed as structurally deficient and functionally obsolete. In early 2010, construction began on a replacement bridge. The new Manette Bridge opened on November 10, 2011.^[4]

https://web.archive.org/web/20120405121115/http://www.kitsapsun.com/news/2010/jun/20/manette-bridge-timeline/

• Jensen, Erv (1988). Manette Pioneering. Manette History Club, pp. 5, 11–14. 88-060804.

Wikimedia Commons has media related to Manette Bridge.

• Article on HistoryLink