[go: up one dir, main page]

Jump to content

File:Floyd rose pro parts.jpg

Page contents not supported in other languages.
This is a file from the Wikimedia Commons
From Wikipedia, the free encyclopedia

Floyd_rose_pro_parts.jpg (585 × 445 pixels, file size: 84 KB, MIME type: image/jpeg)

Summary

Floyd Rose Pro (disassembled, parts numbered)
Source: Floyd Rose Guitars
According to Adam Reiver from Floyd Rose Guitars that I've contacted, these images are public domain. This is a modified version of original image: I've added hint lines and black numbers to add description in an article.

Public domain I, the copyright holder of this work, release this work into the public domain. This applies worldwide.
In some countries this may not be legally possible; if so:
I grant anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law.

Licensing

The copyright holder of this work allows anyone to use it for any purpose including unrestricted redistribution, commercial use, and modification.

Please check the source to verify that this is correct. In particular, note that publication on the Internet, like publication by any other means, does not in itself imply permission to redistribute. Files without valid permission should be tagged with {{subst:npd}}.

Usage notes:

Description of figure

English:
  1. Saddle — A metal box the string is locked into. There is one saddle for each string, hence six for the standard 6-string guitars, and seven for 7-string guitars. Each saddle contains a long screw that fixes the string holder block inside it. An Allen wrench is required to loosen or tighten these.
  2. String Holder Block or Saddle Block — A cube-shaped metal block that presses the string end into the saddle wall thus locking it tight.
  3. Intonation Screws — Screws that hold saddles on the base plate; when loose, the saddles can be moved forward and backward, effectively changing intonation of a string. An Allen wrench is required to loosen or tighten these.
  4. Fine Tuners — Screws that are used to fine-tune strings instead of the machine heads which cannot be used after the nut has locked the strings at the neck. It can be rotated with bare hands.
  5. Vibrato/Tremolo Arm — The most visible part of mechanism, a handle that can be used to change played notes pitch up and down during play.
  6. Nut — A string clamp, installed as the "zero fret" at the neck. It has screws and braces called "locks" to clamp on the strings that run through it. An Allen wrench is required to loosen or tighten the nut.
  7. String Retainer — A metal bar installed at headstock to retain strings that go to the machine heads.
  8. Springs — Springs that pull the bridge downward around the pivot point, balancing the string tension. They are installed into a cavity that is usually accessible from behind the guitar body and is hidden under plastic cover. There are usually 3 springs. However, to change the resistance of arm to more comfortable one, some guitarists may use anything from 1 to 5 springs.
  9. Spring Claw Hook — A connector between the guitar body and springs. It has special "claws" to attach the springs to. This part is usually mounted to the guitar body using long screws that can be adjusted to change the tension of springs and thus re-balance the whole tremolo system.
  10. Allen wrenches — Three sizes are usually supplied with the tremolo. The smallest is used for intonation screws; the mid-sized wrench is used for fixing screws on saddle blocks and the largest is for nut screws. Floyd Rose Licensed systems usually supplies and uses only two sizes of wrenches as their variation uses the same size for the screws on the saddle blocks and nut. However, on some models only need the first two, as the bridge and nut screws are the same size.

Captions

Add a one-line explanation of what this file represents

Items portrayed in this file

depicts

copyrighted, dedicated to the public domain by copyright holder<\/a>"}},"text\/plain":{"en":{"P6216":"copyrighted, dedicated to the public domain by copyright holder"}}}}" class="wbmi-entityview-statementsGroup wbmi-entityview-statementsGroup-P6216 oo-ui-layout oo-ui-panelLayout oo-ui-panelLayout-framed">
released into the public domain by the copyright holder<\/a>"}},"text\/plain":{"en":{"P275":"released into the public domain by the copyright holder"}}},"{\"value\":{\"entity-type\":\"item\",\"numeric-id\":99578078,\"id\":\"Q99578078\"},\"type\":\"wikibase-entityid\"}":{"text\/html":{"en":{"P275":"copyrighted free use<\/a>"}},"text\/plain":{"en":{"P275":"copyrighted free use"}}}}" class="wbmi-entityview-statementsGroup wbmi-entityview-statementsGroup-P275 oo-ui-layout oo-ui-panelLayout oo-ui-panelLayout-framed">

86,471 byte

445 pixel

585 pixel

image/jpeg

determination method or standard<\/a>"}},"text\/plain":{"en":{"":"determination method or standard"}}},"{\"value\":{\"entity-type\":\"item\",\"numeric-id\":13414952,\"id\":\"Q13414952\"},\"type\":\"wikibase-entityid\"}":{"text\/html":{"en":{"P459":"SHA-1<\/a>"}},"text\/plain":{"en":{"P459":"SHA-1"}}}}" class="wbmi-entityview-statementsGroup wbmi-entityview-statementsGroup-P4092 oo-ui-layout oo-ui-panelLayout oo-ui-panelLayout-framed">

aeebf6f37caa255bc3bc4d80cda5e9ab944cedba

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current17:41, 10 September 2005Thumbnail for version as of 17:41, 10 September 2005585 × 445 (84 KB)GreyCatFloyd Rose Pro (disassembled, parts numbered) Source: Floyd Rose Guitars According to Adam Reiver from Floyd Rose Guitars that I've contacted, these images are public domain. This is a modified version of original image: I've added hint lines and black nu

The following page uses this file:

Global file usage

The following other wikis use this file: