View source for Telegraph code

You do not have permission to edit this page, for the following reason:
This IP address range has been globally blocked.
This does not affect your ability to read Wikipedia pages.
Most people who see this message have done nothing wrong. Some kinds of blocks restrict editing from specific service providers or telecom companies in response to recent abuse or vandalism, and can sometimes affect other users who are unrelated to that abuse. Review the information below for assistance if you do not believe that you have done anything wrong.
This block affects editing on all Wikimedia wikis.
The IP address or range 62.210.0.0/16 has been globally blocked by ‪Hasley‬ for the following reason(s):
Open proxy/Webhost: See the help page if you are affected:
This block will expire on 16:21, 18 December 2025. Your current IP address is 62.210.136.28.
Even while globally blocked, you will usually still be able to edit pages on Meta-Wiki.
If you believe you were blocked by mistake, you can find additional information and instructions in the No open proxies global policy. Otherwise, to discuss the block please post a request for review on Meta-Wiki. You could also send an email to the stewards VRT queue at stewards@wikimedia.org including all above details.
Other useful links: Global blocks · Help:I have been blocked
You can view and copy the source of this page:
{{short description|One of the character encodings used to transmit information by telegraphy}}
{{about|telegraph alphabet ciphers|message shortening codes|Commercial code (communications)}}

A '''telegraph code''' is one of the [[character encoding]]s used to transmit [[information]] by [[telegraphy]]. [[Morse code]] is the best-known such code.  ''Telegraphy'' usually refers to the [[electrical telegraph]], but telegraph systems using the [[optical telegraph]] were in use before that.  A code consists of a number of [[code point]]s, each corresponding to a letter of the alphabet, a numeral, or some other character.  In codes intended for machines rather than humans, code points for [[control character]]s, such as [[carriage return]], are required to control the operation of the mechanism.  Each code point is made up of a number of elements arranged in a unique way for that character.  There are usually two types of element (a binary code), but more element types were employed in some codes not intended for machines.  For instance, [[American Morse code]] had about five elements, rather than the two (dot and dash) of [[International Morse Code]].

Codes meant for human interpretation were designed so that the characters that occurred most often had the fewest elements in the corresponding code point.  For instance, Morse code for ''E'', the most common letter in English, is a single dot ({{morse|dot}}), whereas ''Q'' is {{morse|dash|dash|dot|dash}}.  These arrangements meant the message could be sent more quickly and it would take longer for the operator to become fatigued.  Telegraphs were always operated by humans until late in the 19th century.  When automated telegraph messages came in, [[Variable-width encoding|codes with variable-length code points]] were inconvenient for machine design of the period.  Instead, codes with a fixed length were used.  The first of these was the [[Baudot code]], a five-[[bit]] code.  Baudot has only enough code points to print in [[upper case]].  Later codes had more bits ([[ASCII]] has seven) so that both upper and lower case could be printed.  Beyond the telegraph age, modern computers require a very large number of code points ([[Unicode]] has 21 bits) so that multiple languages and alphabets ([[character set]]s) can be handled without having to change the character encoding.  Modern computers can easily handle variable-length codes such as [[UTF-8]] and [[UTF-16]] which have now become ubiquitous.

==Manual telegraph codes==
===Optical telegraph codes===
[[File:Chappe code - c. 1794.svg|thumb|Chappe code c. 1794]]
Prior to the electrical telegraph, a widely used method of building national telegraph networks was the [[optical telegraph]] consisting of a chain of towers from which signals could be sent by semaphore or shutters from tower to tower.  This was particularly highly developed in France and had its beginnings during the [[French Revolution]].  The code used in France was the Chappe code, named after [[Claude Chappe]] the inventor.  The [[British Admiralty]] also used the semaphore telegraph, but with their own code.  The British code was necessarily different from that used in France because the British optical telegraph worked in a different way.  The Chappe system had moveable arms, as if it were waving flags as in [[flag semaphore]].  The British system used an array of shutters that could be opened or closed.<ref>{{multiref|Beauchamp, ch. 1|Bouchet, ch. 2|Burns, ch. 2}}</ref>

====Chappe code====
The Chappe system consisted of a large pivoted beam (the regulator) with an arm at each end (the indicators) which pivoted around the regulator on one extremity.  The angles these components were allowed to take was limited to multiples of 45° to aid readability.  This gave a code space of 8×4×8 [[code point]]s, but the indicator position inline with the regulator was never used because it was hard to distinguish from the indicator being folded back on top of the regulator, leaving a code space of {{nowrap|7×4×7 {{=}} 196}}.  Symbols were always formed with the regulator on either the left- or right-leaning diagonal (oblique) and only accepted as valid when the regulator moved to either the vertical or horizontal position.  The left oblique was always used for messages, with the right oblique being used for control of the system.  This further reduced the code space to 98, of which either four or six code points (depending on version) were [[control character]]s, leaving a code space for text of 94 or 92 respectively.

The Chappe system mostly transmitted messages using a [[code book]] with a large number of set words and phrases.  It was first used on an experimental chain of towers in 1793 and put into service from Paris to [[Lille]] in 1794.  The code book used this early is not known for certain, but an unidentified code book in the [[Paris Postal Museum]] may have been for the Chappe system.  The arrangement of this code in columns of 88 entries led Holzmann & Pehrson to suggest that 88 code points might have been used.  However, the proposal in 1793 was for ten code points representing the numerals 0–9, and Bouchet says this system was still in use as late as 1800 (Holzmann & Pehrson put the change at 1795).  The code book was revised and simplified in 1795 to speed up transmission.  The code was in two divisions, the first division was 94 alphabetic and numeric characters plus some commonly used letter combinations.  The second division was a code book of 94 pages with 94 entries on each page.  A code point was assigned for each number up to 94.  Thus, only two symbols needed to be sent to transmit an entire sentence – the page and line numbers of the code book, compared to four symbols using the ten-symbol code.

In 1799, three additional divisions were added.  These had additional words and phrases, geographical places, and names of people.  These three divisions required extra symbols to be added in front of the code symbol to identify the correct book.  The code was revised again in 1809 and remained stable thereafter.  In 1837 a horizontal only coding system was introduced by Gabriel Flocon which did not require the heavy regulator to be moved.  Instead, an additional indicator was provided in the centre of the regulator to transmit that element of the code.<ref>{{multiref|Bouchet, ch. 2|Coe, ch. 1|Holzmann & Pehrson, ch. 2|Shaffner, ch. 3}}</ref>
[[File:Chappe code - c. 1809.svg|thumb|center|upright=2.7|Chappe code c. 1809]]
{{clear}}

====Edelcrantz code====
[[File:Edelcrantz code 636.svg|thumb|Edelcrantz codepoint 636, which decodes to the motto of the Telegraph Corps; ''Passa väl upp'' ("Be on guard")]]
The [[Abraham Niclas Edelcrantz|Edelcrantz]] system was used in Sweden and was the second largest network built after that of France.  The telegraph consisted of a set of ten shutters.  Nine of these were arranged in a 3×3 matrix.  Each column of shutters represented a binary-coded octal digit with a closed shutter representing "1" and the most significant digit at the bottom.  Each symbol of telegraph transmission was thus a three-digit octal number.  The tenth shutter was an extra-large one at the top.  Its meaning was that the codepoint should be preceded by "A".

One use of the "A" shutter was that a numeral codepoint preceded by "A" meant add a zero (multiply by ten) to the digit.  Larger numbers could be indicated by following the numeral with the code for hundreds (236), thousands (631) or a combination of these.  This required fewer symbols to be transmitted than sending all the zero digits individually.  However, the main purpose of the "A" codepoints was for a codebook of predetermined messages, much like the Chappe codebook.

The symbols without "A" were a large set of numerals, letters, common syllables and words to aid [[Data compaction|code compaction]].  Around 1809, Edelcrantz introduced a new codebook with 5,120 codepoints, each requiring a two-symbol transmission to identify.

{| class="wikitable"
|+ Edelcrantz alphabet
|-
!A!!B!!C!!D!!E!!F!!G!!H!!I!!J!!K!!L!!M!!N!!O!!P!!Q!!R!!S!!T
|-
|003||026||{{N&}}||055||112||125||162||210||254||{{N&}}||274||325||362||422||450||462||{{N&}}||500||530||610
|-
!U!!V!!W!!X!!Y!!Z!!Å!!Ä!!Ö!!1!!2!!3!!4!!5!!6!!7!!8!!9!!00!!000
|-
|640||650||{{N&}}||710||711||712||713||723||737||001||002||004||010||020||040||100||200||400||236||631
|}

There were many codepoints for error correction (272, error), flow control, and supervisory messages.  Usually, messages were expected to be passed all the way down the line, but there were circumstances when individual stations needed to communicate directly, usually for managerial purposes.  The most common, and simplest situation was communication between adjacent stations.  Codepoints 722 and 227 were used for this purpose, to get the attention of the next station towards, or away from, the sun, respectively.  For more remote stations codepoints 557 and 755 respectively were used, followed by the identification of the requesting and target stations.<ref>{{multiref|Holzmann & Pehrson, ch. 3|Edelcrantz, ch. 4}}</ref>

====Wig-wag====
Flag signalling was widely used for point-to-point signalling prior to the optical telegraph, but it was difficult to construct a nationwide network with hand-held flags.  The much larger mechanical apparatus of the semaphore telegraph towers was needed so that a greater distance between links could be achieved.  However, an extensive network with hand-held flags was constructed during the [[American Civil War]].  This was the [[Wigwag (flag signals)|wig-wag]] system which used the code invented by [[Albert J. Myer]].  Some of the towers used were enormous, up to 130 feet, to get a good range.  Myer's code required only one flag using a [[Ternary signal|ternary code]].  That is, each code element consisted of one of three distinct flag positions.  However, the alphabetical codepoints required only two positions, the third position only being used in [[control character]]s.  Using a ternary code in the alphabet would have resulted in shorter messages because fewer elements are required in each codepoint, but a binary system is easier to read at long distance since fewer flag positions need to be distinguished.  Myer's manual also describes a ternary-coded alphabet with a fixed length of three elements for each codepoint.<ref>{{multiref|Coe, ch. 1|Myer (1866)|Wrixon, ch. 11}}</ref>

===Electrical telegraph codes===
====Cooke and Wheatstone and other early codes====
[[File:C&W1 code.svg|thumb|Cooke and Wheatstone 1-needle code (C&W1)]]
Many different codes were invented during the early development of the [[electrical telegraph]].  Virtually every inventor produced a different code to suit their particular apparatus.  The earliest code used commercially on an electrical telegraph was the [[Cooke and Wheatstone telegraph#Codes|Cooke and Wheatstone telegraph five needle code]] (C&W5).  This was first used on the [[Great Western Railway]] in 1838.  C&W5 had the major advantage that the code did not need to be learned by the operator; the letters could be read directly off the display board.  However, it had the disadvantage that it required too many wires.  A one needle code, C&W1, was developed that required only one wire.  C&W1 was widely used in the UK and the British Empire.
[[File:American Morse Code - letters.svg|thumb|American Morse code]]
Some other countries used C&W1, but it never became an international standard and generally each country developed their own code.  In the US, [[American Morse code]] was used, whose elements consisted of dots and dashes distinguished from each other by the length of the pulse of current on the telegraph line.  This code was used on the telegraph invented by [[Samuel Morse]] and [[Alfred Vail]] and was first used commercially in 1844.  Morse initially had code points only for numerals.  He planned that numbers sent over the telegraph would be used as an index to a dictionary with a limited set of words.  Vail invented an extended code that included code points for all the letters so that any desired word could be sent.  It was Vail's code that became American Morse.  In France, the telegraph used the [[Foy-Breguet telegraph]], a two-needle telegraph that displayed the needles in Chappe code, the same code as the French optical telegraph, which was still more widely used than the electrical telegraph in France.  To the French, this had the great advantage that they did not need to retrain their operators in a new code.<ref>{{multiref|Beauchamp, ch. 2|Burns, ch. 3|Chesnoy ch. 2|Coe, ch. 2|Guillemin, bk. 5, ch. 3|Wrixon, ch. 10, 11}}</ref>

====Standardisation—Morse code====
[[File:International Morse Code - letters.svg|thumb|International Morse Code]]
In Germany in 1848, [[Friedrich Clemens Gerke]] developed a heavily modified version of American Morse for use on German railways.  American Morse had three different lengths of dashes and two different lengths of space between the dots and dashes in a code point.  The Gerke code had only one length of dash and all inter-element spaces within a code point were equal.  Gerke also created code points for the German [[Umlaut (linguistics)|umlaut]] letters, which do not exist in English.  Many central European countries belonged to the German-Austrian Telegraph Union.  In 1851, the Union decided to adopt a common code across all its countries so that messages could be sent between them without the need for operators to recode them at borders.  The Gerke code was adopted for this purpose.

In 1865, a conference in Paris adopted the Gerke code as the international standard, calling it [[International Morse Code]].  With some very minor changes, this is the [[Morse code]] used today.  The Cooke and Wheatstone telegraph needle instruments were capable of using Morse code since dots and dashes could be sent as left and right movements of the needle.  By this time, the needle instruments were being made with end stops that made two distinctly different notes as the needle hit them.  This enabled the operator to write the message without looking up at the needle which was much more efficient.  This was a similar advantage to the Morse telegraph in which the operators could hear the message from the clicking of the relay armature.  Nevertheless, after the British telegraph companies were nationalised in 1870 the [[General Post Office]] decided to standardise on the Morse telegraph and get rid of the many different systems they had inherited from private companies.

In the US, telegraph companies refused to use International Morse because of the cost of retraining operators.  They opposed attempts by the government to make it law.  In most other countries, the telegraph was state controlled so the change could simply be mandated.  In the US, there was no single entity running the telegraph.  Rather, it was a multiplicity of private companies.  This resulted in international operators needing to be fluent in both versions of Morse and to recode both incoming and outgoing messages.  The US continued to use American Morse on landlines ([[radiotelegraphy]] generally used International Morse) and this remained the case until the advent of teleprinters which required entirely different codes and rendered the issue moot.<ref>{{multiref|Beauchamp, ch. 3|Chesnoy, ch. 2, pt. A|Coe, ch. 3|Guillemin, bk. 5, ch. 4|Huurdeman, ch. 8.10|Kieve, ch. 9|Lyall, ch. 2}}</ref>

====Transmission speed====
[[File:Obsolete chinese telegraph code.jpg|thumb|One page from the Chinese telegraph code book]]
The speed of sending in a manual telegraph is limited by the speed the operator can send each code element.  Speeds are typically stated in [[words per minute]].  Words are not all the same length, so literally counting the words will get a different result depending on message content.  Instead, a word is defined as five characters for the purpose of measuring speed, regardless of how many words are actually in the message.  Morse code, and many other codes, also do not have the same length of code for each character of the word, again introducing a content-related variable.  To overcome this, the speed of the operator repeatedly transmitting a standard word is used.  PARIS is classically chosen as this standard because that is the length of an average word in Morse.<ref>{{multiref|Coe, Appendixes}}</ref>

In American Morse, the characters are generally shorter than International Morse.  This is partly because American Morse uses more dot elements, and partly because the most common dash, the short dash, is shorter than the International Morse dash—two dot elements against three dot elements long.  In principle, American Morse will be transmitted faster than International Morse if all other variables are equal.  In practice, there are two things that detract from this.  Firstly, American Morse, with around five coding elements was harder to get the timings right when sent quickly.  Inexperienced operators were apt to send garbled messages, an effect known as [[hog Morse]].  The second reason is that American Morse is more prone to [[intersymbol interference]] (ISI) because of the larger density of closely spaced dots.  This problem was particularly severe on [[submarine telegraph cable]]s, making American Morse less suitable for international communications.  The only solution an operator had immediately to hand to deal with ISI was to slow down the transmission speed.<ref>{{multiref|Coe, ch. 6}}</ref>

====Language character encodings====
[[Morse code for non-Latin alphabets]], such as [[Cyrillic script|Cyrillic]] or  [[Arabic script]], is achieved by constructing a [[character encoding]] for the alphabet in question using the same, or nearly the same code points as used in the [[Latin alphabet]].  [[Syllabary|Syllabaries]], such as Japanese [[katakana]], are also handled this way ([[Wabun code]]).  The alternative of adding more code points to Morse code for each new character would result in code transmissions being very long in some languages.<ref>{{multiref|Gollings, ch. 6|King, appx. A}}</ref>

Languages that use [[logogram]]s are more difficult to handle due to the much larger number of characters required.  The [[Chinese telegraph code]] uses a codebook of around 9,800 characters (7,000 when originally launched in 1871) which are each assigned a four-digit number.  It is these numbers that are transmitted, so Chinese Morse code consists entirely of numerals.  The numbers must be looked up at the receiving end making this a slow process, but in the era when telegraph was widely used, skilled Chinese [[telegrapher]]s could recall many thousands of the common codes from memory.  The Chinese telegraph code is still used by law enforcement because it is an unambiguous method of recording Chinese names in non-Chinese scripts.<ref>{{multiref|Gollings, ch. 6|Mullaney, ch. 7}}</ref>

==Automatic telegraph codes==
===Baudot code===
[[File:Baudot Code - 1888 patent - chart only.png|thumb|The original Baudot code]]
Early [[printing telegraph]]s continued to use Morse code, but the operator no longer sent the dots and dashes directly with a single key.  Instead they operated a piano keyboard with the characters to be sent marked on each key.  The machine generated the appropriate Morse code point from the key press.  An entirely new type of code was developed by [[Émile Baudot]], patented in 1874.  The [[Baudot code]] was a 5-bit binary code, with the bits sent [[Serial communication|serially]].  Having a fixed length code greatly simplified the machine design.  The operator entered the code from a small 5-key piano keyboard, each key corresponding to one bit of the code.  Like Morse, Baudot code was organised to minimise operator fatigue with the code points requiring the fewest key presses assigned to the most common letters.

Early printing telegraphs required mechanical synchronisation between the sending and receiving machine.  The [[Hughes printing telegraph]] of 1855 achieved this by sending a Morse dash every revolution of the machine.  A different solution was adopted in conjunction with the Baudot code.  Start and stop bits were added to each character on transmission, which allowed [[asynchronous serial communication]].  This scheme of start and stop bits was followed on all the later major telegraph codes.<ref>{{multiref|Beauchamp, ch. 11|Raykoff, ch. 8|Noll, ch. 2}}</ref>

===Murray code===
On busy telegraph lines, a variant of the Baudot code was used with [[punched paper tape]].  This was the Murray code, invented by [[Donald Murray (inventor)|Donald Murray]] in 1901.  Instead of directly transmitting to the line, the keypresses of the operator punched holes in the tape.  Each row of holes across the tape had five possible positions to punch, corresponding to the five bits of the Murray code.  The tape was then run through a tape reader which generated the code and sent it down the telegraph line.  The advantage of this system was that multiple messages could be sent to line very fast from one tape, making better use of the line than direct manual operation could.

Murray completely rearranged the character encoding to minimise wear on the machine since operator fatigue was no longer an issue.  Thus, the character sets of the original Baudot and the Murray codes are not compatible.  The five bits of the Baudot code are insufficient to represent all the letters, numerals, and punctuation required in a text message.  Further, additional characters are required by printing telegraphs to better control the machine.  Examples of these [[control character]]s are [[line feed]] and [[carriage return]].  Murray solved this problem by introducing [[shift code]]s.  These codes instruct the receiving machine to change the character encoding to a different character set.  Two shift codes were used in the Murray code; figure shift and letter shift.  Another control character introduced by Murray was the [[delete character]] (DEL, code 11111) which punched out all five holes on the tape.  Its intended purpose was to remove erroneous characters from the tape, but Murray also used multiple DELs to mark the boundary between messages.  Having all the holes punched out made a perforation which was easy to tear into separate messages at the receiving end.  A variant of the Baudot–Murray code became an international standard as International Telegraph Alphabet no. 2 (ITA 2) in 1924.  The "2" in ITA 2 is because the original Baudot code became the basis for ITA 1.  ITA 2 remained the standard telegraph code in use until the 1960s and was still in use in places well beyond then.<ref>{{multiref|Huurdeman, ch. 19}}</ref>
[[File:International Telegraph Alphabet 2 brightened.jpg|thumb|center|upright=2.7|The ITA 2 code, in its punched tape form]]

==TeleTypeSetter==
The [[teleprinter]] was invented in 1915.  This is a printing telegraph with a typewriter-like keyboard on which the operator types the message.  Nevertheless, [[telegram]]s continued to be sent in [[upper case]] only because there was not room for a lower case character set in Baudot–Murray or ITA 2 codes.

Teleprinters were quickly adopted by news organizations, and "[[wire service]]s" supplying stories to multiple newspapers developed, but an additional application soon arose: sending finished [[Copy (publishing)|copy]] from an urban [[newsroom]] to a remote printing plant.  The limited character repertoire of the 5-level codes meant that someone had to manually retype the telegram in mixed case, a laborious and error-prone operation.

The [[Monotype system]] already had separate keyboards and casters communicating by a paper tape, but it used a very wide 28-position paper tape to select one of 15 rows and 15 columns in the [[Monotype system#Matrix-case|matrix case]].  To compete, the [[Mergenthaler Linotype Company]] developed a [[TeleTypeSetter]] (TTS) system which functioned similarly, but using a narrower 6-level code (the name "bit" would not be coined [[Bit#History|until 1948]]) which was more economical to transmit.  TTS retained shift and unshift [[control character]]s, but they operated much like a modern keyboard: the unshift state provided lower-case letters, digits, and common punctuation, while the shift state provided upper-case letters and special symbols.  TTS also included Linotype-specific features such as [[Ligature (writing)#Stylistic ligatures|ligatures]] and a second "upper rail" shift function usually used for [[italic type]].

A typewriter-like "perforator" would create a paper tape, and had a large dial showing the length of the line so far at the minimum and maximum [[Linotype machine#Spaceband box|spaceband]] width so the typist could decide where to break lines.  This tape was then transmitted to "reperforator", and the recreated paper tape was fed into a [[Linotype machine]] with a tape reader at the printing plant.  (The tape reader could be retrofitted to an existing Linotype machine, but also special high-speed Linotype machines were made which could operate faster than a manual operator could type.)

An operator was still required to handle the tapes, take the finished type to layout, add [[type metal]] as needed, clear jams, and so on, but one operator could manage multiple Linotype machines.

To keep the feed perforations in the middle of the tape, the TTS code added a "0" row beside the "1" row in ITA-2.  To show the similarity to the ITS-2 code, the following tables are sorted as if this is the most-significant bit.

{|{{chset-table-header1|TeleTypeSetter code (unshift state)<ref name=TTS-manual>{{cite book
 |title=Teletypesetter Operator Instruction Manual
 |publisher=Teletypesetter corporation
 |date=July 1933
 |url=https://www.navy-radio.com/manuals/tty/7b-3307.pdf
 |access-date=2024-07-28
}}</ref><ref name=TTS-handbook>{{cite book
 |title=The Linotype Handbook for Teletypesetter Operation
 |publisher=Mergenthaler Linotype Company
 |year=1951
 |url=https://archive.org/details/LinotypeHandbookForTeletypesetterOperation1951
 |access-date=2024-07-28
}}</ref><ref name=add-thin-space>{{cite book
 |title=Specification TS-512: Standards Which Must be Adopted by Newspapers Joining a Press Association Network
 |issue=2
 |publisher=Teletypesetter Corporation
 |date=May 1951
 |url=https://www.navy-radio.com/manuals/tty/ts/teletypesetter-ts512-5105.pdf
 |access-date=2024-07-28
}}</ref>
<ref name=linotype-keyboards>{{cite web
 |title=Linotype keyboards
 |website=Linotype wiki
 |url=https://linotype.wiki/pages/linotype_keyboards_diagrams.php#teletypesetter
 |access-date=2024-07-28
}}</ref><ref name=hydraquadder>{{cite tech report
 |title=Linotype Electrically-Controlled Hydraquadder
 |type=Instruction Book
 |pages=19–20
 |publisher=Mergenthaler Linotype Company
 |year=1955
 |url=http://www.linotype.org/OnLineDocs/Quadders/Hydraquadder-electric-1955.pdf#page=20
 |access-date=2024-07-28
}}</ref>}}
|-
|{{chset-left1|0xxxx0}}
|{{chset-ctrl1|Tape space&#10;U+0000 NULL|{{ctrl|NUL|TAPE}}|style=background:#FFD}}
|{{chset-cell1|U+0065 LATIN SMALL LETTER E|[[e]]}}
|{{chset-ctrl1|Elevate&#10;U+000A LINE FEED (LF)|{{ctrl|LF|ELEV}}|style=background:#FFD}}
|{{chset-cell1|U+0061 LATIN SMALL LETTER A|[[a]]}}
|{{chset-ctrl1|Variable-width space&#10;U+0020 SPACE|{{ctrl|SP}}|style=background:#FFD;}}
|{{chset-cell1|U+0073 LATIN SMALL LETTER S|[[s]]}}
|{{chset-cell1|U+0069 LATIN SMALL LETTER I|[[i]]}}
|{{chset-cell1|U+0075 LATIN SMALL LETTER U|[[u]]}}
|{{chset-ctrl1|U+000D CARRIAGE RETURN (CR)|{{ctrl|CR|RET}}|style=background:#FFD}}
|{{chset-cell1|U+0064 LATIN SMALL LETTER D|[[d]]}}
|{{chset-cell1|U+0072 LATIN SMALL LETTER R|[[r]]}}
|{{chset-cell1|U+006A LATIN SMALL LETTER J|[[j]]}}
|{{chset-cell1|U+006E LATIN SMALL LETTER N|[[n]]}}
|{{chset-cell1|U+0066 LATIN SMALL LETTER F|[[f]]}}
|{{chset-cell1|U+0063 LATIN SMALL LETTER C|[[c]]}}
|{{chset-cell1|U+006B LATIN SMALL LETTER K|[[k]]}}
|-
|{{chset-left1|1xxxx0}}
|{{chset-cell1|U+0074 LATIN SMALL LETTER T|[[t]]}}
|{{chset-cell1|U+007A LATIN SMALL LETTER Z|[[z]]}}
|{{chset-cell1|U+006C LATIN SMALL LETTER L|[[l]]}}
|{{chset-cell1|U+0077 LATIN SMALL LETTER W|[[w]]}}
|{{chset-cell1|U+0068 LATIN SMALL LETTER H|[[h]]}}
|{{chset-cell1|U+0079 LATIN SMALL LETTER Y|[[y]]}}
|{{chset-cell1|U+0070 LATIN SMALL LETTER P|[[p]]}}
|{{chset-cell1|U+0071 LATIN SMALL LETTER Q|[[q]]}}
|{{chset-cell1|U+006F LATIN SMALL LETTER O|[[o]]}}
|{{chset-cell1|U+0062 LATIN SMALL LETTER B|[[b]]}}
|{{chset-cell1|U+0067 LATIN SMALL LETTER G|[[g]]}}
|{{chset-ctrl1|Shift to upper-case mode|SHIFT|style=background:#FFD}}
|{{chset-cell1|U+006D LATIN SMALL LETTER M|[[m]]}}
|{{chset-cell1|U+0078 LATIN SMALL LETTER X|[[x]]}}
|{{chset-cell1|U+0076 LATIN SMALL LETTER V|[[v]]}}
|{{chset-ctrl1|Shift to lower-case mode|UNSHIFT|style=background:#FFD}}
|-
|{{chset-left1|0xxxx1}}
|{{chset-ctrl1|U+2009 THIN SPACE|{{ctrl|THSP}}|style=background:#FFD}}<!--Some sources show this swapped with EMSP below-->
|{{chset-cell1|U+0033 DIGIT THREE|[[3]]}}
|{{chset-ctrl1|Paper feed (teletypewriter only) &#34;or L.M.&#34; (?)&#10;U+000C FORM FEED|{{ctrl|FF|PF}}|style=background:#FFD}}
|{{chset-cell1|U+0024 DOLLAR SIGN|[[Dollar sign|$]]}}
|{{chset-ctrl1|Add-thin-space; alternate code which can be overprinted over a regular space&#10;U+2009 THIN SPACE|{{ctrl|THSP}}|style=background:#FFD}}
|{{chset-ctrl1|U+2003 EM SPACE|{{ctrl|EMSP}}|style=background:#FFD}}<!--Some sources show this swapped with THSP above-->
|{{chset-cell1|U+0038 DIGIT EIGHT|[[8]]}}
|{{chset-cell1|U+0037 DIGIT SEVEN|[[7]]}}
|{{chset-cell1|U+2019 RIGHT SINGLE QUOTATION MARK|[[Right single quotation mark|’]]}}
|{{chset-cell1|U+2010 HYPHEN|[[Hyphen|‐]]}}
|{{chset-cell1|U+0034 DIGIT FOUR|[[4]]}}
|{{chset-ctrl1|Bell (teletypewriter only)&#10;U+0007 BELL|{{ctrl|BEL}}|style=background:#FFD}}
|{{chset-cell1|U+002C COMMA|[[Comma|,]]|style=background:#FFD}}
|{{chset-ctrl1|Quad (justify) left|[[Typographic alignment#Flush left|QL]]|style=background:#FFD}}
|{{chset-ctrl1|U+2002 EN SPACE|{{ctrl|ENSP}}|style=background:#FFD}}
|{{chset-ctrl1|Quad (justify) right &#34;or U.M.&#34; (?)|[[Typographic alignment#Flush right|QR]]|style=background:#FFD}}
|-
|{{chset-left1|1xxxx1}}
|{{chset-cell1|U+0035 DIGIT FIVE|[[5]]}}
|{{chset-cell1|U+0029 RIGHT PARENTHESIS|[[Right parenthesis|)]]}}
|{{chset-cell1|U+007C VERTICAL LINE|[[Vertical bar|{{pipe}}]]}}
|{{chset-cell1|U+0032 DIGIT TWO|[[2]]}}
|{{chset-cell1|Em leader&#10;U+2025 TWO DOT LEADER|[[‥]]|style=background:#FFD}}
|{{chset-cell1|U+0036 DIGIT SIX|[[6]]}}
|{{chset-cell1|U+0030 DIGIT ZERO|[[0]]}}
|{{chset-cell1|En leader&#10;U+2024 ONE DOT LEADER|[[․]]|style=background:#FFD}}
|{{chset-cell1|U+0039 DIGIT NINE|[[9]]}}
|{{chset-ctrl1|Upper rail&#10;U+000E SHIFT OUT&#10;Early versions used unshifted UR for LR|[[Shift Out|UR]]|style=background:#FFD}}
|{{chset-cell1|U+003B SEMICOLON|[[Semicolon|;]]}}
|{{chset-ctrl1|Lower rail&#10;U+000F SHIFT IN&#10;Early versions used unshifted UR for LR|[[Shift In|LR]]|style=background:#FFD}}
|{{chset-cell1|U+002E FULL STOP|[[Full stop|.]]|style=background:#FFD}}
|{{chset-cell1|U+0031 DIGIT ONE|[[1]]}}
|{{chset-ctrl1|Quad (justify) center|[[Typographic alignment#Centered|CEN]]|style=background:#FFD}}
|{{chset-ctrl1|Rub out&#10;U+007F DELETE|{{ctrl|DEL}}|style=background:#FFD}}
|-
|{{chset-table-footer1 |
{{legend|#FFD|Does not depend on SHIFT state}}
}}
|}

{|{{chset-table-header1|TeleTypeSetter code (shift state){{r|TTS-manual|TTS-handbook|add-thin-space|linotype-keyboards|hydraquadder}}}}
|-
|{{chset-left1|0xxxx0}}
|{{chset-ctrl1|Tape space&#10;U+0000 NULL|{{ctrl|NUL|TAPE}}|style=background:#FFD}}
|{{chset-cell1|U+0045 LATIN CAPITAL LETTER E|[[E]]}}
|{{chset-ctrl1|Elevate&#10;U+000A LINE FEED (LF)|{{ctrl|LF|ELEV}}|style=background:#FFD}}
|{{chset-cell1|U+0041 LATIN CAPITAL LETTER A|[[A]]}}
|{{chset-ctrl1|Variable-width space&#10;U+0020 SPACE|{{ctrl|SP}}|style=background:#FFD;}}
|{{chset-cell1|U+0053 LATIN CAPITAL LETTER S|[[S]]}}
|{{chset-cell1|U+0049 LATIN CAPITAL LETTER I|[[I]]}}
|{{chset-cell1|U+0055 LATIN CAPITAL LETTER U|[[U]]}}
|{{chset-ctrl1|U+000D CARRIAGE RETURN (CR)|{{ctrl|CR|RET}}|style=background:#FFD}}
|{{chset-cell1|U+0044 LATIN CAPITAL LETTER D|[[D]]}}
|{{chset-cell1|U+0052 LATIN CAPITAL LETTER R|[[R]]}}
|{{chset-cell1|U+004A LATIN CAPITAL LETTER J|[[J]]}}
|{{chset-cell1|U+004E LATIN CAPITAL LETTER N|[[N]]}}
|{{chset-cell1|U+0046 LATIN CAPITAL LETTER F|[[F]]}}
|{{chset-cell1|U+0043 LATIN CAPITAL LETTER C|[[C]]}}
|{{chset-cell1|U+004B LATIN CAPITAL LETTER K|[[K]]}}
|-
|{{chset-left1|1xxxx0}}
|{{chset-cell1|U+0054 LATIN CAPITAL LETTER T|[[T]]}}
|{{chset-cell1|U+005A LATIN CAPITAL LETTER Z|[[Z]]}}
|{{chset-cell1|U+004C LATIN CAPITAL LETTER L|[[L]]}}
|{{chset-cell1|U+0057 LATIN CAPITAL LETTER W|[[W]]}}
|{{chset-cell1|U+0048 LATIN CAPITAL LETTER H|[[H]]}}
|{{chset-cell1|U+0059 LATIN CAPITAL LETTER Y|[[Y]]}}
|{{chset-cell1|U+0050 LATIN CAPITAL LETTER P|[[P]]}}
|{{chset-cell1|U+0051 LATIN CAPITAL LETTER Q|[[Q]]}}
|{{chset-cell1|U+004F LATIN CAPITAL LETTER O|[[O]]}}
|{{chset-cell1|U+0042 LATIN CAPITAL LETTER B|[[B]]}}
|{{chset-cell1|U+0047 LATIN CAPITAL LETTER G|[[G]]}}
|{{chset-ctrl1|Shift to upper-case mode|SHIFT|style=background:#FFD}}
|{{chset-cell1|U+004D LATIN CAPITAL LETTER M|[[M]]}}
|{{chset-cell1|U+0058 LATIN CAPITAL LETTER X|[[X]]}}
|{{chset-cell1|U+0056 LATIN CAPITAL LETTER V|[[V]]}}
|{{chset-ctrl1|Shift to lower-case mode|UNSHIFT|style=background:#FFD}}
|-
|{{chset-left1|0xxxx1}}
|{{chset-ctrl1|U+2009 THIN SPACE|{{ctrl|THSP}}|style=background:#FFD}}<!--Some sources show this swapped with EMSP below-->
|{{chset-cell1|U+003F QUESTION MARK|[[?]]}}
|{{chset-ctrl1|Paper feed (teletypewriter only) &#34;or L.M.&#34; (?)&#10;U+000C FORM FEED|{{ctrl|FF|PF}}|style=background:#FFD}}
|{{chset-cell1|U+0021 EXCLAMATION MARK|[[!]]}}
|{{chset-ctrl1|Add-thin-space; alternate code which can be overprinted over a regular space&#10;U+2009 THIN SPACE|{{ctrl|THSP}}|style=background:#FFD}}
|{{chset-ctrl1|U+2003 EM SPACE|{{ctrl|EMSP}}|style=background:#FFD}}<!--Some sources show this swapped with THSP above-->
|{{chset-cell1|U+2014 EM DASH|[[Em dash|—]]}}
|{{chset-cell1|U+0026 AMPERSAND|[[&]]}}
|{{chset-cell1|U+2018 LEFT SINGLE QUOTATION MARK|[[Left single quotation mark|‘]]}}
|{{chset-cell1|U+0040 COMMERCIAL AT|[[@]]}}
|{{chset-cell1|U+002A ASTERISK|[[*]]}}
|{{chset-ctrl1|Bell (teletypewriter only)&#10;U+0007 BELL|{{ctrl|BEL}}|style=background:#FFD}}
|{{chset-cell1|U+002C COMMA|[[Comma|,]]|style=background:#FFD}}
|{{chset-ctrl1|Quad (justify) left|[[Typographic alignment#Flush left|QL]]|style=background:#FFD}}
|{{chset-ctrl1|U+2002 EN SPACE|{{ctrl|ENSP}}|style=background:#FFD}}
|{{chset-ctrl1|Quad (justify) right &#34;or U.M.&#34; (?)|[[Typographic alignment#Flush right|QR]]|style=background:#FFD}}
|-
|{{chset-left1|1xxxx1}}
|{{chset-cell1|U+FB00 LATIN SMALL LIGATURE FF|[[Ff (ligature)|ﬀ]]}}
|{{chset-cell1|U+0028 LEFT PARENTHESIS|[[Left parenthesis|(]]}}
|{{chset-cell1|Different sources say &#34;vertical rule&#34; or &#34;em space&#34;|[[File:Symbol question.svg|16x16px]]}}
|{{chset-cell1|U+FB04 LATIN SMALL LIGATURE FFL|[[Ffl (ligature)|ﬄ]]}}
|{{chset-cell1|Em leader&#10;U+2025 TWO DOT LEADER|[[‥]]|style=background:#FFD}}
|{{chset-cell1|Pound (weight) sign&#10;U+2114 L B Bar Symbol|[[Pound (mass)|℔]]}}<!--The bar is hard to see in the TTS references, but is clearly present in Linotype samples.-->
|{{chset-cell1|U+FB02 LATIN SMALL LIGATURE FL|[[Fl (ligature)|ﬂ]]}}
|{{chset-cell1|En leader&#10;U+2024 ONE DOT LEADER|[[․]]|style=background:#FFD}}
|{{chset-cell1|U+FB01 LATIN SMALL LIGATURE FI|[[Fi (ligature)|ﬁ]]}}
|{{chset-ctrl1|Upper rail&#10;U+000E SHIFT OUT|[[Shift Out|UR]]|style=background:#FFD}}
|{{chset-cell1|U+003A COLON|[[Colon (punctuation)|:]]}}
|{{chset-ctrl1|Lower rail&#10;U+000F SHIFT IN|[[Shift In|LR]]|style=background:#FFD}}
|{{chset-cell1|U+002E FULL STOP|[[Full stop|.]]|style=background:#FFD}}
|{{chset-cell1|U+FB03 LATIN SMALL LIGATURE FFI|[[Ffi (ligature)|ﬃ]]}}
|{{chset-ctrl1|Quad (justify) center|[[Typographic alignment#Centered|CEN]]|style=background:#FFD}}
|{{chset-ctrl1|Rub out&#10;U+007F DELETE|{{ctrl|DEL}}|style=background:#FFD}}
|-
|{{chset-table-footer1 |
{{legend|#FFD|Does not depend on SHIFT state}}
}}
|}

Each shift state has 41 unique characters, making 82 in total.  Adding the 8 fixed-width characters which are duplicated in the two shift states,<!--including SHIFT+100101, which duplicates an unshifted character even if it's not clear which one--> this matches the 90-matrix capacity of a standard Linotype machine.  (The variable-width space bands are a 91st character.)

==Computer age==
The first computers used existing 5-bit ITA-2 keyboards and printers due to their easy availability, but the limited character repertoire quickly became a pain point.

===ASCII===
By the 1960s, improving teleprinter technology meant that longer codes were nowhere near as significant a factor in teleprinter costs as they once were.  The computer users wanted lowercase characters and additional punctuation, while both teleprinter and computer manufacturers wished to get rid of shift codes.  This led the [[American Standards Association]] to develop a 7-bit code, the American Standard Code for Information Interchange ([[ASCII]]).  The final form of ASCII was published in 1964 and it rapidly became the standard teleprinter code.  ASCII was the last major code developed explicitly with telegraphy equipment in mind.  Telegraphy rapidly declined after this and was largely replaced by [[computer networks]], especially the [[Internet]] in the 1990s.
[[File:ASCII Code Chart.svg|frameless|center|upright=2.7]]
ASCII had several features geared to aid computer programming.  The letter characters were in numerical order of code point, so an alphabetical sort could be achieved simply by sorting the data numerically.  The code point for corresponding upper and lower case letters differed only by the value of bit 6, allowing a mix of cases to be sorted alphabetically if this bit was ignored.  Other codes were introduced, notably [[IBM]]'s [[EBCDIC]] derived from the [[punched card]] method of input, but it was ASCII and its derivatives that won out as the ''lingua franca'' of computer information exchange.<ref>{{multiref|Gillam, ch. 2|Huurdeman, ch. 30|Noll, ch. 2}}</ref>

===ASCII extension and Unicode===
The arrival of the [[microprocessor]] in the 1970s and the [[personal computer]] in the 1980s with their [[8-bit architecture]] led to the 8-bit [[byte]] becoming the standard unit of computer storage.  Packing 7-bit data into 8-bit storage is inconvenient for data retrieval.  Instead, most computers stored one ASCII character per byte.  This left one bit over that was not doing anything useful.  Computer manufacturers used this bit in [[extended ASCII]] to overcome some of the limitations of standard ASCII.  The main issue was that ASCII was geared to English, particularly American English, and lacked the [[accented]] vowels used in other European languages such as French.  Currency symbols for other countries were also added to the character set.  Unfortunately, different manufacturers implemented different extended ASCIIs making them incompatible across [[Computing platform|platforms]].  In 1987, the [[International Standards Organisation]] issued the standard [[ISO 8859-1]], for an 8-bit character encoding based on 7-bit ASCII which was widely taken up.

[[ISO 8859]] character encodings were developed for non-[[Latin script]]s such as [[Cyrillic script|Cyrillic]], [[Hebrew script|Hebrew]], [[Arabic script|Arabic]], and [[Greek script|Greek]].  This was still problematic if a document or data used more than one script.  Multiple switches between character encodings was required.  This was solved by the publication in 1991 of the standard for 16-bit [[Unicode]], in development since 1987.  Unicode maintained ASCII characters at the same code points for compatibility.  As well as support for non-Latin scripts, Unicode provided code points for logograms such as [[Chinese characters]] and many specialist characters such as astrological and mathematical symbols.  In 1996, Unicode 2.0 allowed code points greater than 16-bit; up to 20-bit, and 21-bit with an additional private use area.  20-bit Unicode provided support for extinct languages such as [[Old Italic script]] and many rarely used Chinese characters.<ref>{{multiref|Gillam, ch. 2|Gollings, ch. 6}}</ref>

{{see also|Wikibooks:Unicode/Character reference}}

==International Code of Signals (radiotelegraph)==
In 1931, the [[International Code of Signals]], originally created for ship communication by signalling using flags, was expanded by adding a collection of five-letter codes to be used by radiotelegraph operators.

== Comparison of codes ==
=== Comparison of flag codes ===
{| class="wikitable"
|+ Table 1
|-
!Code!!A<br/>N!!B<br/>O!!C<br/>P!!D<br/>Q!!E<br/>R!!F<br/>S!!G<br/>T!!H<br/>U!!I<br/>V!!J<br/>W!!K<br/>X!!L<br/>Y!!M<br/>Z!!Data type!!Notes!!Ref
|-
|Myer 2-element wig-wag||11<br/>22||1221<br/>12||212<br/>2121||111<br/>2122||21<br/>122||1112<br/>121||1122<br/>1|| 211<br/>221||2<br/>2111||2211<br/>2212||1212<br/>1211||112<br/>222||2112<br/>1111||Serial, variable length||1=flag left, 2=flag right<br/><ref group=note name=view>Left and right are the message sender's left and right.  The neutral position is with the flag raised above the signaller's head.  Myer's manual specifies the code with the exact opposite movements (Myer (1872), p. 68), A is 22 for instance, but the code actually used was commonly as shown here (Myer (1872), pp. 94–95).</ref><ref group=note>The two element code actually had a third position defined.  This was pointing the flag directly down at the ground.  This element was only used in control characters.  For instance, a single 3 meant "end of word", and 33 meant "end of sentence".</ref>||<ref>{{multiref|Coe, p. 3|Myer (1866), pp. 53, 80}}</ref>
|-
|International Morse in flag notation||12<br/>21||2111<br/>222||2121<br/>1221||211<br/>2212||1<br/>121||1121<br/>111||221<br/>2||1111<br/>112||11<br/>1112||1222<br/>122||212<br/>2112||1211<br/>2122||22<br/>2211||Serial, variable length||1=flag left, 2=flag right||<ref>Maver, pp. 363–364</ref>
|-
|American Morse in flag notation||12<br/>21||2111<br/>131||1131<br/>11111||211<br/>1121||1<br/>1311||121<br/>111||221<br/>2||1111<br/>112||11<br/>1112||2121<br/>122||212<br/>1211||2+<br/>11311||22<br/>11131||Serial, variable length||1=flag left, 2=flag right, 3=flag dipped<ref group=note>The "+" indicates a slight pause in that position.</ref>||<ref>{{multiref|Johnson, p. 525|Maver, pp. 363–365}}</ref>
|-
|Myer 3-element wig-wag||112<br/>322||121<br/>223||211<br/>313||212<br/>131||221<br/>331||122<br/>332||123<br/>133||312<br/>233||213<br/>222||232<br/>322||323<br/>321||231<br/>111||132<br/>113||Serial, 3-element||1=flag left, 2=flag right, 3=flag dipped||<ref>Myer (1866), p. 81</ref>
|}

====Table 1 notes====
{{reflist|group=note|30em}}

=== Comparison of needle codes ===
{| class="wikitable"
|+ Table 2
|-
!Code!!A<br/>N!!B<br/>O!!C<br/>P!!D<br/>Q!!E<br/>R!!F<br/>S!!G<br/>T!!H<br/>U!!I<br/>V!!J<br/>W!!K<br/>X!!L<br/>Y!!M<br/>Z!!Data type!!Notes!!Ref
|-
|Schilling 1-needle (1820)||colspan="13"|[[File:Schilling 1-needle horizontal.svg|frameless|upright=2.7]]||Serial, variable length||This is the first code to use a single circuit.<br/><ref group=note name=tick/>||<ref>{{multiref|Shiers, pp. 101–102|Calvert|Shaffner, p. 137}}</ref>
|-
|Gauss and Weber 1-needle (1833)||colspan="13"|[[File:Gauss & Weber horizontal.svg|frameless|upright=2.7]]||Serial, variable length||<ref group=note>The Gauss and Weber code has shared codepoints for C/K, and there is no distinction of I/J.  Burns shows V as having no code.  Burns shows the code for D as \// which would make it the same as G, so probably an error, likewise Burns has \\// for Z.  The codepoints for D and Z are as shown here in both Shiers and Calvert.</ref><br/><ref group=note name=tick/>||<ref>{{multiref|Shiers, p. 101|Burns, p. 76|Calvert}}</ref>
|-
|Cooke and Wheatstone 5-needle (1838)||colspan="13"|[[File:C&W5 horizontal.svg|frameless|upright=2.7]]||Parallel, 5-element||<ref group=note>The C&W 5-needle codes for C, J, Q, V, X and Z were substituted with other letters.</ref>||<ref>{{multiref|Shaffner, pp. 200–201|Burns, p. 76}}</ref>
|-
|Cooke and Wheatstone 2-needle||colspan="13"|[[File:C&W2 horizontal.svg|frameless|upright=2.7]]||Serial-parallel, variable length||<ref group=note name=tick>On most needle telegraph codes, the short stroke is executed first on joined glyphs, regardless of whether it is to the left or right of the long stroke (Shaffner, p. 221).  The Morse needle code is an exception; here all the strokes are executed in order (Hallas).  If a short stroke does not dictate otherwise, the strokes are read left-to-right with one exception.  The C&W 1-needle codes marked on the right of the faceplate (those codes where the long strokes are leaning right) are executed right-to-left, but still following short stroke first.  Those on the left of the plate (left-leaning long strokes) are executed left-to-right as normal.</ref>||<ref>{{multiref|Shaffner, pp. 226–229|Guillemin, p. 554}}</ref>
|-
|Cooke and Wheatstone 1-needle (1846)||colspan="13"|[[File:C&W1 horizontal.svg|frameless|upright=2.7]]||Serial, variable length||<ref group=note>The C&W 1-needle codes for J, Q and Z on early instruments were substituted with G, K and S respectively.  The earlier table in this article shows these substitutes, this table shows the later unique codes.  J remained missing from most instruments even after Q and Z were added.  Most sources do not give a code for J; the tick symbol shown for it here is taken from the faceplate of the instrument pictured in the external links.</ref><br/><ref group=note name=tick/>||<ref>{{multiref|Shaffner, p. 221|Guillemin, p. 551|Huurdeman, p. 68}}</ref>
|-
|Highton 1-needle||colspan="13"|[[File:Highton1 horizontal.svg|frameless|upright=2.7]]||Serial, variable length||<ref group=note>Some sources identify the Highton code as the Cooke and Wheatstone code ([[Amédée Guillemin|Guillemin]] for instance).  This code is shown on the faceplate of [[Henry Highton]]'s gold-leaf telegraph (Highton, p. 90) and his one-needle telegraph (Highton, p. 94).  The latter instrument was used by Highton's [[British Electric Telegraph Company]] (Highton, p. 100).  It was also used for a while by the [[Magnetic Telegraph Company]] who took them over (Morse, p. 116), and may have been used by a company closely associated with them, the [[Submarine Telegraph Company]].  Guillemin, writing in the context of Belgium who were connected to the UK via the Submarine Telegraph Company's Dover to Ostend cable, identifies this code as the "English code" (Gullemin, p. 551).</ref><br/><ref group=note name=tick/>||<ref>{{multiref|Highton, p. 94|Guillemin, p. 551}}</ref>
|-
|Morse as a needle code||colspan="13"|[[File:Morse needle horizontal.svg|frameless|upright=2.7]]||Serial, variable length||Needle left = dot<br/>Needle right = dash<br/><ref group=note>The tick marks used for Morse on needle telegraphs are read slightly differently to other codes.  The short strokes are used to represent Morse dots, not to indicate which stroke is performed first.  The strokes are read strict left-to-right.  The time the needle is held to the right for a "dash" is usually the same as a left movement for a "dot" in contrast with a conventional Morse system using a sounder (Hallas).</ref>||<ref>Hallas</ref>
|-
|Foy-Breguet code<br/>(2-needle)||colspan="13"|[[File:Foy-Breguet horizontal.svg|frameless|upright=2.7]]||Parallel, 2-element||<ref group=note>The central bar in Foy-Breguet is fixed in position, the moveable needles are the two arms at the end of the bar.</ref>||<ref>Guillemin, p. 558</ref>
|}

==== Table 2 notes ====
{{reflist|group=note|30em}}
An alternative representation of needle codes is to use the numeral "1" for needle left, and "3" for needle right.  The numeral "2", which does not appear in most codes represents the needle in the neutral upright position.  The codepoints using this scheme are marked on the face of some needle instruments, especially those used for training.<ref>{{multiref|Highton, pp. 90–95|Guillemin, pp. 550–551}}</ref>

=== Comparison of dot-dash codes ===
<!-- 
{{steinheil|hi|lo|hi}}
 -->

{| class="wikitable" style="text-align:center;"
|+ Table 3
|-
!Code!!A<br/>N!!B<br/>O!!C<br/>P!!D<br/>Q!!E<br/>R!!F<br/>S!!G<br/>T!!H<br/>U!!I<br/>V!!J<br/>W!!K<br/>X!!L<br/>Y!!M<br/>Z!!Data type!!Notes!!Ref
|-
|[[Carl August von Steinheil|Steinheil]] (1837)||{{steinheil|lo|hi|lo}}<br/>{{steinheil|hi|hi}}||{{steinheil|lo|hi|hi|lo}}<br/>{{steinheil|lo|lo|lo}}||{{steinheil|lo|lo|hi}}<br/>{{steinheil|hi|lo|lo|hi}}||{{steinheil|hi|lo}}<br/>{{N&}}||{{steinheil|lo}}<br/>{{steinheil|lo|lo}}||{{steinheil|lo|hi|hi}}<br/>{{steinheil|lo|lo|hi|hi}}||{{steinheil|hi|hi|lo}}<br/>{{steinheil|lo|hi}}||{{steinheil|hi|hi|hi|hi}}<br/>{{steinheil|hi|lo|hi}}||{{steinheil|hi}}<br/>{{steinheil|hi|lo|hi}}||{{steinheil|hi}}<br/>{{steinheil|hi|lo|hi|lo}}||{{steinheil|lo|lo|hi}}<br/>{{N&}}||{{steinheil|hi|lo|lo}}<br/>{{N&}}||{{steinheil|hi|hi|hi}}<br/>{{steinheil|hi|hi|lo|lo}}||Serial, variable length||<ref group=note>The 1837 Steinheil code has shared codepoints for C/K, and U/V.  There is no distinction made between I and J.  This code is almost identical to the 1849 code, except that it is designed for printing from pulses of negative and positive polarity rather than pulses of short and long duration.</ref>||<ref>{{multiref|Burns, p. 77|Calvert}}</ref>
|-
|[[Carl August von Steinheil|Steinheil]] (1849)||{{morse|dash|dot|dash}}<br/>{{morse|dot|dot}}||{{morse|dash|dot|dot|dash}}<br/>{{morse|dash|dash|dash}}||{{morse|dash|dash|dot}}<br/>{{morse|dot|dash|dash|dot}}||{{morse|dash|dot}}<br/>{{morse|dash|dash|dot}}||{{morse|dash}}<br/>{{morse|dash|dash}}||{{morse|dash|dot|dot}}<br/>{{morse|dash|dash|dot|dot}}||{{morse|dot|dot|dash}}<br/>{{morse|dash|dot}}||{{morse|dot|dash}}<br/>{{morse|dot|dash|dot}}||{{morse|dot}}<br/>{{morse|dash|dot|dot}}||{{morse|dot}}<br/>{{morse|dot|dash|dot|dash}}||{{morse|dash|dash|dot}}<br/>{{N&}}||{{morse|dot|dash|dash}}<br/>{{N&}}||{{morse|dot|dot|dot}}<br/>{{morse|dot|dot|dash|dash}}||Serial, variable length||<ref group=note>The 1849 Steinheil code has shared codepoints for C/K/Q, D/T, and F/V (Gerke, p. 128).  There is no distinction between I and J.</ref>||<ref>{{multiref|Burns, p. 77|Gerke, p. 126}}</ref>
|-
|[[Alexander Bain (inventor)|Bain]] (1843)||{{morse|dot|dash}}<br/>{{morse|dot|dot|dash|dash}}||{{morse|dot|dash|dot}}<br/>{{morse|dash}}||{{morse|dot|dot|dot}}<br/>{{morse|dash|dot|dash}}||{{morse|dot|dot|dash}}<br/>{{morse|dash|dot|dash|dot}}||{{morse|dot}}<br/>{{morse|dash|dash|dot}}||{{morse|dot|dash|dash|dash}}<br/>{{morse|dash|dot|dot}}||{{morse|dot|dash|dot|dot}}<br/>{{morse|dash|dot|dot|dot}}||{{morse|dot|dash|dash}}<br/>{{morse|dash|dot}}||{{morse|dot|dot}}<br/>{{morse|dash|dash|dash|dot}}||{{morse|dot|dot|dot|dash}}<br/>{{morse|dash|dash|dot|dot}}||{{morse|dot|dash|dash|dot}}<br/>{{morse|dash|dot|dot|dash}}||{{morse|dot|dot|dot|dot}}<br/>{{morse|dash|dash}}||{{morse|dot|dash|dot|dash}}<br/>{{morse|dash|dash|dash}}||Serial, variable length||<ref group=note>Bain's code is as given in Myer.  Burns has several variant codepoints.  Many of these are probably errors as they lead to duplicate codepoints, and Myer had worked as a telegraph operator on the Bain telegraph.  Nevertheless, the differences are given here for completeness.  Burns has {{morse|dash|dot}} for A, {{morse|dot|dash|dash|dot}} for Q, and {{morse|dash|dot|dash|dash}} for T.  The codes for I and O are swapped.</ref>||<ref>{{multiref|Myer (1851), p. 11|Burns, p. 77}}</ref>
|-
|[[Samuel Morse|Morse]] (c. 1838)||{{morse|dot|dot|dot}}<br/>{{morse|dash|dot}}||{{morse|dot|dot|aspace|dot|dot}}<br/>{{morse|dot|dot}}||{{morse|dot|aspace|dot|dot}}<br/>{{morse|dot|dot|dot|dot|dot}}||{{morse|dot|dot|dot|aspace|dot}}<br/>{{morse|dot|dot|dash|dot}}||{{morse|dot}}<br/>{{morse|dot|aspace|dot}}||{{morse|dot|aspace|dot|dot|dot}}<br/>{{morse|dot|dash|dot}}||{{morse|dot|dot|aspace|dot}}<br/>{{morse|dash|dash|dot}}||{{morse|dot|dot|dot|dot}}<br/>{{morse|dot|dash|dash}}||{{morse|dot|dash}}<br/>{{morse|dash}}||{{morse|dot|dot|aspace|dot}}<br/>{{morse|dot|dot|dash}}||{{morse|dash|dot|dash}}<br/>{{morse|dash|dash}}||{{morse|ldash}}<br/>{{morse|dot|dash}}||{{morse|dash|dot|dot}}<br/>{{morse|dot|dash|dot}}||Serial, variable length||<ref group=note>The 1838 Morse code has shared codepoints for I/Y, G/J, and S/Z (Shiers, p. 102).</ref>||<ref>Shiers, pp. 101–103</ref>
|-
|[[Samuel Morse|Morse]] (c. 1840)<br/>(American Morse)||{{morse|dot|dash}}<br/>{{morse|dash|dot}}||{{morse|dash|dot|dot|dot}}<br/>{{morse|dot|aspace|dot}}||{{morse|dot|dot|aspace|dot}}<br/>{{morse|dot|dot|dot|dot|dot}}||{{morse|dash|dot|dot}}<br/>{{morse|dot|dot|dash|dot}}||{{morse|dot}}<br/>{{morse|dot|aspace|dot|dot}}||{{morse|dot|dash|dot}}<br/>{{morse|dot|dot|dot}}||{{morse|dash|dash|dot}}<br/>{{morse|dash}}||{{morse|dot|dot|dot|dot}}<br/>{{morse|dot|dot|dash}}||{{morse|dot|dot}}<br/>{{morse|dot|dot|dot|dash}}||{{morse|dash|dot|dash|dot}}<br/>{{morse|dot|dash|dash}}||{{morse|dash|dot|dash}}<br/>{{morse|dot|dash|dot|dot}}||{{morse|ldash}}<br/>{{morse|dot|dot|aspace|dot|dot}}||{{morse|dash|dash}}<br/>{{morse|dot|dot|dot|aspace|dot}}||Serial, variable length||<ref group=note>American Morse used a shorter dash than later codes (two dot units compared to three in International Morse). This is not reflected in the table for ease of comparison</ref> ||<ref>{{multiref|Burns, p. 77|Huurdeman, p. 144}}</ref>
|-
|[[Friedrich Clemens Gerke|Gerke]] (1848)<br/>(continental Morse)||{{morse|dot|dash}}<br/>{{morse|dash|dot}}||{{morse|dash|dot|dot|dot}}<br/>{{morse|dot|dash|dot|dot|dot}}||{{morse|dash|dot|dash|dot}}<br/>{{morse|dot|dot|dot|dot|dot}}||{{morse|dash|dot|dot}}<br/>{{morse|dash|dash|dot|dash}}||{{morse|dot}}<br/>{{morse|dot|dash|dot}}||{{morse|dot|dot|dash|dot}}<br/>{{morse|dot|dot|dot}}||{{morse|dash|dash|dot}}<br/>{{morse|dash}}||{{morse|dot|dot|dot|dot}}<br/>{{morse|dot|dot|dash}}||{{morse|dot|dot}}<br/>{{morse|dot|dot|dot|dash}}||{{morse|dot|dot}}<br/>{{morse|dot|dash|dash}}||{{morse|dash|dot|dash}}<br/>{{morse|dot|dot|dash|dot|dot|dot}}||{{morse|dot|dash|dot|dot}}<br/>{{morse|dash|dash|dot|dot|dot}}||{{morse|dash|dash}}<br/>{{morse|dot|dash|dash|dot|dot}}||Serial, variable length||<ref group=note>The Gerke code did not distinguish between I and J.  Both Burns and Gerke himself list only J.  Huurdeman gives the International Morse codepoint for J.  Burns has {{morse|dot|dot|dash|dot|dot}} as the codepoint for X.  This appears to be an error, both Huurdeman and Gerke have {{morse|dot|dot|dash|dot|dot|dot}}.</ref>||<ref>{{multiref|Burns, p. 77|Huurdeman, p. 144|Gerke, p. 126}}</ref>
|-
|International Morse<br/>(1851)||{{morse|dot|dash}}<br/>{{morse|dash|dot}}||{{morse|dash|dot|dot|dot}}<br/>{{morse|dash|dash|dash}}||{{morse|dash|dot|dash|dot}}<br/>{{morse|dot|dash|dash|dot}}||{{morse|dash|dot|dot}}<br/>{{morse|dash|dash|dot|dash}}||{{morse|dot}}<br/>{{morse|dot|dash|dot}}||{{morse|dot|dot|dash|dot}}<br/>{{morse|dot|dot|dot}}||{{morse|dash|dash|dot}}<br/>{{morse|dash}}||{{morse|dot|dot|dot|dot}}<br/>{{morse|dot|dot|dash}}||{{morse|dot|dot}}<br/>{{morse|dot|dot|dot|dash}}||{{morse|dot|dash|dash|dash}}<br/>{{morse|dot|dash|dash}}||{{morse|dash|dot|dash}}<br/>{{morse|dash|dot|dot|dash}}||{{morse|dot|dash|dot|dot}}<br/>{{morse|dash|dot|dash|dash}}||{{morse|dash|dash}}<br/>{{morse|dash|dash|dot|dot}}||Serial, variable length|| ||<ref>{{multiref|Gollings, p. 80|Huurdeman, p. 144|Burns, p. 77}}</ref>
|}

==== Table 3 notes ====
{{reflist|group=note|30em}}
When used with a [[printing telegraph]] or [[siphon recorder]], the "dashes" of dot-dash codes are often made the same length as the "dot".  Typically, the mark on the tape for a dot is made above the mark for a dash.  An example of this can be seen in the 1837 Steinheil code, which is nearly identical to the 1849 Steinheil code, except that they are represented differently in the table.  International Morse code was commonly used in this form on [[submarine telegraph cable]]s.<ref>Bright, pp. 601–606</ref>

=== Comparison of binary codes ===

{| class="wikitable"
|+ Table 4<ref group=note>All codepoints in this table are given in [[hexadecimal]] for conciseness.  Typically, they were actually transmitted as binary codes in [[asynchronous serial communication]] with binary "0" represented by a "space" (typically, a positive voltage) and "1" represented by a "mark" (typically, a negative voltage).  Each transmitted character was preceded by a "start" symbol and finished with a "stop" symbol to maintain synchronisation (Toncich, p. 108).</ref>
|-
!Code!!A<br/>N!!B<br/>O!!C<br/>P!!D<br/>Q!!E<br/>R!!F<br/>S!!G<br/>T!!H<br/>U!!I<br/>V!!J<br/>W!!K<br/>X!!L<br/>Y!!M<br/>Z!!Data type!!Notes!!Ref
|-
|Baudot and {{nowrap|ITA 1}}||01<br/>1E||0C<br/>07||0D<br/>1F||0F<br/>1D||02<br/>1C||0E<br/>14||0A<br/>15||0B<br/>05||06<br/>17||09<br/>16||19<br/>12||1B<br/>04||1A<br/>13||Serial, 5-bit|| ||<ref>Salomon, p. 21</ref>
|-
|Baudot–Murray and {{nowrap|ITA 2}}||03<br/>0C||19<br/>18||0E<br/>16||09<br/>17||01<br/>0A||0D<br/>05||1A<br/>10||14<br/>07||06<br/>1E||0B<br/>13||0F<br/>1D||12<br/>15||1C<br/>11||Serial, 5-bit|| ||<ref>Gollings, p. 83</ref>
|-
|ASCII||41/61<br/>4E/6E||42/62<br/>4F/6F||43/63<br/>50/70||44/64<br/>51/71||45/65<br/>52/72||46/66<br/>53/73||47/67<br/>54/74||48/78<br/> 55/75||49/69<br/>56/76||4A/6A<br/>57/77||4B/6B<br/>58/78||4C/6C<br/>59/79||4D/6D<br/>5A/7A||Serial, 7-bit||<ref group=note>Two codepoints are given in ASCII for each character.  These represent, respectively, the uppercase and lowercase characters.</ref>||<ref>Wyatt, pp. 681–684</ref>
|}

==== Table 4 notes ====
{{reflist|group=note|30em}}

==See also==
* [[Commercial code (communications)]]
* [[Great Western Railway telegraphic codes]]

==References==
{{reflist|23em}}

==Bibliography==
* Beauchamp, Ken, '' History of Telegraphy'', IET, 2001 {{ISBN|0852967926}}.
* Bouchet, Olivier, ''Wireless Optical Communications'', Wiley, 2012 {{ISBN|1848213166}}.
* [[Charles Tilston Bright|Bright, Charles Tilston]], [https://archive.org/details/cihm_00867/page/n3 ''Submarine Telegraphs''], London: Crosby Lockwood, 1898 {{oclc|776529627}}.
* Burns, Russel W., ''Communications: An International History of the Formative Years'', IEE, 2004 {{ISBN|0863413277}}.
* Calvert, James B., [https://mysite.du.edu/~jcalvert/tel/morse/morse.htm "The Electromagnetic Telegraph"], accessed and [https://web.archive.org/web/20190921121745/https://mysite.du.edu/~jcalvert/tel/morse/morse.htm archived] 13 October 2019.
* Chesnoy, Jose, ''Undersea Fiber Communication Systems'', Academic Press, 2002 {{ISBN|0-08-049237-1}}.
* Coe, Lewis, ''The Telegraph: A History of Morse's Invention and Its Predecessors in the United States'', McFarland, 2003 {{ISBN|0-7864-1808-7}}.
* Edelcrantz, Abraham Niclas, ''Afhandling om Telegrapher'' ("A Treatise on Telegraphs"), 1796, as translated in ch. 4 of Holzmann & Pehrson.
* Gerke, Friedrich Clemens, [https://archive.org/details/bub_gb_pqlAAAAAcAAJ_2/ ''Der praktische Telegraphist, oder, Die electro-magnetische Telegraphie''], Hoffmann und Campe, 1851 {{oclc|162961437}}.
* Gillam, Richard, ''Unicode Demystified'', Addison-Wesley Professional, 2003 {{ISBN|0201700522}}.
* Gollings, Gus, "Multilingual Script Encoding", ch. 6 in, Cope, Bill; Gollings, Gus, ''Multilingual Book Production'', Common Ground, 2001 {{ISBN|186335073X}}.
* Guillemin, Amédée, [https://archive.org/details/applicationsphy00guilgoog/page/n9 ''The Applications of Physical Forces''], Macmillan and Company, 1877 {{oclc|5894380237}}.
* Hallas, Stuart, M., [http://www.samhallas.co.uk/railway/single_needle.htm "The Single Needle Telegraph"], accessed and [https://web.archive.org/web/20191005100822/http://www.samhallas.co.uk/railway/single_needle.htm archived] 5 October 2019.
* Highton, Edward, ''The Electric Telegraph: Its History and Progress'', J. Weale, 1852 {{oclc|999489281}}.
* Holzmann, Gerard J.; Pehrson, Björn, ''The Early History of Data Networks'', Wiley, 1995 {{isbn|0818667826}}.
* Huurdeman, Anton A., ''The Worldwide History of Telecommunications'', John Wiley & Sons, 2003 {{ISBN|0471205052}}.
* Johnson, Rossiter (ed), [https://books.google.com/books?id=EqCgSx4PlhcC ''Universal Cyclopædia and Atlas''], vol. 10, D. Appleton and Company, 1901 {{LCCN|05009702}}.
* Kieve, Jeffrey L., ''The Electric Telegraph: A Social and Economic History'', David and Charles, 1973 {{oclc|655205099}}.
* King, Thomas W., ''Modern Morse Code in Rehabilitation and Education'', Allyn and Bacon, 2000 {{ISBN|0205287514}}.
* Lyall, Francis, ''International Communications: The International Telecommunication Union and the Universal Postal Union'', Routledge, 2016 {{ISBN|1-317-114345}}.
* Maver, William Jr., [https://archive.org/details/americantelegrap00mave/page/n5 ''American Telegraphy and Encyclopedia of the Telegraph''], Maver Publishing Company, 1909 {{oclc|499312411}}.
* Mullaney, Thomas S., "Semiotic Sovereignty: The 1871 Chinese Telegraph Code in Historical Perspective", pp.&nbsp;153–184 in, Jing Tsu; Elman, Benjamin A. (eds), ''Science and Technology in Modern China, 1880s–1940s'', BRILL, 2014 {{ISBN|9004268782}}.
* Myer, Albert J., ''A New Sign Language for Deaf Mutes'', Jewett, Thomas & Co., 1851 {{oclc|1000370390}}.
* Myer, Albert J., [https://babel.hathitrust.org/cgi/pt?id=nyp.33433009343363 ''A Manual of Signals''], D. van Nostrand, 1866 {{oclc|563202260}}.
* Myer, Albert J., [https://books.google.com/books?id=aVVCAAAAYAAJ ''A Manual of Signals''], D. van Nostrand, 1872 {{oclc|682033474}}.
* Noll, A. Michael, ''The Evolution of Media'', Rowman & Littlefield, 2007 {{ISBN|0742554821}}.
* Raykoff, Ivan, "Piano, telegraph, typewriter: Listening to the language of touch", ch. 8 in, Colligan, Colette (ed); Linley, Margaret (ed), ''Media, Technology, and Literature in the Nineteenth Century'', Routledge, 2016 {{ISBN|131709865X}}.
* Salomon, David, ''Data Compression: The Complete Reference'', Springer Science & Business Media, 2007 {{ISBN|1846286034}}.
* Shaffner, Taliaferro Preston, [https://archive.org/stream/telegraphmanualc00shafrich#page/n3/mode/2up ''The Telegraph Manual''], Pudney & Russell, 1859 {{oclc|258508686}}.
* Shiers, George, ''The Electric Telegraph: An Historical Anthology'', Arno Press, 1977 {{oclc|838764933}}, including reprints of parts of,
** Smithsonian Institution, [https://archive.org/details/annualreportboa81unkngoog/page/n361 ''Annual Report of the Board of Regents of the Smithsonian Institution, 1878''], Smithsonian Institution, 1879 {{oclc|1053068855}}.
* Toncich, Dario J., ''Data Communications and Networking for Manufacturing Industries'', Chrystobel Engineering, 1993 {{isbn|0646105221}}.
* Wrixon, Fred B., ''Codes, Ciphers, Secrets and Cryptic Communication'', Black Dog & Leventhal Publishers, 2005 {{ISBN|1579124852}}.
* Wyatt, Allen L., ''Using Assembly Language'', Que Corporation, 1887 {{isbn|0880222972}}.

==External links==
* [https://www.flickr.com/photos/10983301@N06/2619001486/ Single-needle telegraph instrument] with Cooke and Wheatstone code marked on the dial and two-note endstops
* [https://www.flickr.com/photos/jsutcliffe/8541388415/ Cooke and Wheatstone style single-needle instrument] with Morse code marked on the dial
* James B. Calvert, [https://mysite.du.edu/~jcalvert/tel/morse/morse.htm The Electromagnetic Telegraph], shows several encodings including Schilling (1820), Gauss and Weber (1833), Steinheil (1837), C&W1 (1846), C&W2 (1843), Bregeut (1844), Russian Morse, and a comparison chart of Morse type codes including the Bain code.

{{Character encoding}}

{{DEFAULTSORT:Telegraph Code}}
[[Category:Telegraphy]]
Pages transcluded onto the current version of this page (help):
Template:About (view source) (template editor protected)
Template:Border (view source) (extended confirmed protected)
Template:Catalog lookup link (view source) (template editor protected)
Template:Character encoding (view source) (semi-protected)
Template:Character encodings (view source) (semi-protected)
Template:Chset-cell1 (view source) (semi-protected)
Template:Chset-ctrl1 (view source) (semi-protected)
Template:Chset-left1 (view source) (semi-protected)
Template:Chset-table-footer1 (edit)
Template:Chset-table-header1 (view source) (semi-protected)
Template:Cite book (view source) (protected)
Template:Cite tech report (view source) (semi-protected)
Template:Cite web (view source) (protected)
Template:Clear (view source) (protected)
Template:Control code link (edit)
Template:Control code link/alias (edit)
Template:Control code link/styles.css (edit)
Template:Ctrl (edit)
Template:Greater color contrast ratio (view source) (template editor protected)
Template:Hlist/styles.css (view source) (protected)
Template:ISBN (view source) (template editor protected)
Template:Isbn (view source) (template editor protected)
Template:LCCN (view source) (semi-protected)
Template:Last word (view source) (template editor protected)
Template:Legend (view source) (template editor protected)
Template:Legend/styles.css (view source) (template editor protected)
Template:Main other (view source) (protected)
Template:Morse (edit)
Template:Multiref (view source) (semi-protected)
Template:N& (view source) (template editor protected)
Template:Nowrap (view source) (protected)
Template:OCLC (view source) (template editor protected)
Template:Oclc (view source) (extended confirmed protected)
Template:Pagetype (view source) (protected)
Template:Pipe (view source) (template editor protected)
Template:Plainlist/styles.css (view source) (protected)
Template:R (view source) (template editor protected)
Template:R/ref (view source) (template editor protected)
Template:R/superscript (view source) (template editor protected)
Template:R/where (view source) (template editor protected)
Template:Red x (unicode) (view source) (template editor protected)
Template:Reflist (view source) (protected)
Template:Reflist/styles.css (view source) (protected)
Template:SDcat (view source) (protected)
Template:See also (view source) (template editor protected)
Template:Short description (view source) (protected)
Template:Short description/lowercasecheck (view source) (protected)
Template:Steinheil (edit)
Template:Unbulleted list citebundle (view source) (semi-protected)
Template:Yesno (view source) (protected)
Template:Yesno-no (view source) (template editor protected)
Template:Yesno-yes (view source) (template editor protected)
Module:About (view source) (template editor protected)
Module:Arguments (view source) (protected)
Module:Catalog lookup link (view source) (template editor protected)
Module:Check for unknown parameters (view source) (protected)
Module:Check isxn (view source) (template editor protected)
Module:Citation/CS1 (view source) (protected)
Module:Citation/CS1/COinS (view source) (protected)
Module:Citation/CS1/Configuration (view source) (protected)
Module:Citation/CS1/Date validation (view source) (protected)
Module:Citation/CS1/Identifiers (view source) (protected)
Module:Citation/CS1/Utilities (view source) (protected)
Module:Citation/CS1/Whitelist (view source) (protected)
Module:Citation/CS1/styles.css (view source) (protected)
Module:Color contrast (view source) (template editor protected)
Module:Color contrast/colors (view source) (template editor protected)
Module:Disambiguation/templates (view source) (protected)
Module:Format link (view source) (template editor protected)
Module:GetParameters (view source) (template editor protected)
Module:Hatnote (view source) (template editor protected)
Module:Hatnote/styles.css (view source) (template editor protected)
Module:Hatnote list (view source) (template editor protected)
Module:Icon (view source) (template editor protected)
Module:Icon/data (view source) (template editor protected)
Module:LCCN (view source) (semi-protected)
Module:Labelled list hatnote (view source) (template editor protected)
Module:List (view source) (protected)
Module:Navbar (view source) (protected)
Module:Navbar/configuration (view source) (protected)
Module:Navbar/styles.css (view source) (protected)
Module:Navbox (view source) (template editor protected)
Module:Navbox/configuration (view source) (template editor protected)
Module:Navbox/styles.css (view source) (template editor protected)
Module:Pagetype (view source) (protected)
Module:Pagetype/config (view source) (protected)
Module:Pagetype/disambiguation (view source) (protected)
Module:Pagetype/rfd (view source) (protected)
Module:Pagetype/setindex (view source) (protected)
Module:Pagetype/softredirect (view source) (protected)
Module:SDcat (view source) (protected)
Module:String (view source) (protected)
Module:String2 (view source) (template editor protected)
Module:TableTools (view source) (protected)
Module:Wikitext Parsing (view source) (protected)
Module:Yesno (view source) (protected)
Return to Telegraph code.
Retrieved from "https://en.wikipedia.org/wiki/Telegraph_code"