Devanagari

Template:IndicTextRight Devanāgarī (देवनागरी) is an abugida script used to write, either along with other scripts, or exclusively, several Indian languages, including Sanskrit, Hindi, Marathi, Sindhi, Bihari, Bhili, Marwari, Konkani, Bhojpuri, Nepali, Nepal Bhasa from Nepal and sometimes Kashmiri and Romani. It is written and read from left to right.

Devanāgarī abugida
Rigveda manuscript in Devanāgarī (early 19th century)
Script type	Abugida
Time period	~1200 CE to the present
Direction	Left-to-right
Region	India and Nepal
Languages	Several North Indian languages, including Sanskrit, Hindi, Marathi, Sindhi, Bihari, Bhili, Konkani, Bhojpuri, Nepali, Nepal Bhasa from Nepal and sometimes Kashmiri and Romani
Related scripts
Parent systems	Proto-Sinaitic Phoenician Aramaic Brāhmī Gupta script Siddham Devanāgarī abugida
ISO 15924
ISO 15924	Deva (315), ​Devanagari (Nagari)
Unicode
Unicode alias	Devanagari
This article contains phonetic transcriptions in the International Phonetic Alphabet (IPA). For an introductory guide on IPA symbols, see Help:IPA. For the distinction between [ ], / / and ⟨ ⟩, see IPA § Brackets and transcription delimiters.

The transliteration used in this article follows the popular IAST conventions.

Devanāgarī emerged around CE 1200 out of the Siddham script, gradually replacing the earlier, closely related Sharada script (which remained in parallel use in Kashmir). Both are immediate descendants of the Gupta script, ultimately deriving from the Brāhmī script attested from the 3rd century BCE; Nāgarī appeared in approx. the 8th century as an eastern variant of the Gupta script, contemporary to Sharada, its western variant. The descendants of Brahmi form the Brahmic family, including the alphabets employed for many other South and South-East Asian languages.

Sanskrit nāgarī is the feminine of nāgara "urban(e)", an adjectival vrddhi derivative from nagara "city"; the feminine form is used because of its original application to qualify the feminine noun lipi "script" ("urban(e) script", i.e. the script of the cultured). There were several varieties in use, one of which was distinguished by affixing deva "deity" to form a tatpurusha compound meaning the "urban(e) [script] of the deities (= gods)", i.e. "divine urban(e) [script]". However, the widespread use of "Devanāgarī" is a relatively recent phenomenon; well into the twentieth century, and even today, simply Nāgarī was also in use for this same script. The rapid spread of the usage of Devanāgarī seems also to be connected with the almost exclusive use of this script in colonial times to publish works in Sanskrit, even though traditionally nearly all indigenous scripts have actually been employed for this language. This has led to the establishment of such a close connection between the script and Sanskrit that it is, erroneously, widely regarded as "the Sanskrit script" today.

Interpreted by popular etymology to refer to a "City of the Gods", the name in certain Yogic traditions^{[citation needed]} was taken to refer to the body of the individual. The philosophy behind this is that when one meditates on the specific sounds of the Devanāgarī alphabet, the written forms appear spontaneously in the mind.

The Devanāgarī writing system can be called an abugida, as each consonant has an inherent vowel (a), that can be changed with the different vowel signs. Devanāgarī is written from left to right. In Sanskrit, words were written together without spaces, so that the top bar is unbroken, although there were some exceptions to this rule. The break of the top line primarily marks breath groups. In modern languages, word breaks are used.

Devanāgarī has 12 svara (pure sounds, or vowels) and 34 vyañjana (ornamented sounds, consonants). An akṣara is formed by the combination of one ( or none )vyañjana and one or more svara, and represents a phonetic unit of the śabda (utterance). The akṣara is written by applying standard diacritical modifiers to the vyañjana corresponding to the svara. An akṣara is usually more basic and predictable than the syllable in English. For example, the English 'cat' (considered to have just one syllable in English) is written as two akṣaras, the 'ka' and the 'ta'.

The svara and vyañjana are ordered and grouped logically for studying or reciting. Thus the pure sounds, 'a', 'i', 'u' and their lengthened versions ('ā', 'ī', 'ū') are followed by the combined ('e', 'ai', 'o', 'au'), nasal ('ṃ') and aspirated ('ḥ') forms. The vyañjana themselves are grouped into 6 groups (rows) of 5 (columns). The first five rows progress as velar, palatal, retroflex, dental and labial, corresponding to utilizing or touching the tongue to progressively outer parts of the mouth when making the sound. Additional vyañjana are technically sonorants, sibilants, or widely used conjunct forms. For each row or group, the columns logically progress to softer sounds, paired with aspirated forms, ending in the nasal form for that group.

Most consonants can be joined to one or two other consonants so that the inherent vowel is suppressed. The resulting conjunct form is called a ligature. Many ligatures appear simply as two individual consonants joined together, and so are a form of ligature. Some ligatures are more elaborately formed and not as easily recognized as containing the individual consonants.

When reading Sanskrit written in Devanāgarī, the pronunciation is completely unambiguous. Similarly, any word in Sanskrit is considered to be written only in one manner (discounting modern typesetting variations in depicting conjunct forms). However, for modern languages, certain conventions have been made (e.g. truncating the vowel form of the last consonant while speaking, even as it continues to be written in full form). There are also some modern conventions for writing English words in Devanāgarī.

Certain Sanskrit texts and mantras are typically written with additional diacritical marks above and below the akṣara to denote pitch and tempo, to ensure completely accurate reproduction of the sound.

All the vowels in Devanāgarī are attached to the top or bottom of the consonant or to an <aa> vowel sign attached to the right of the consonant, with the exception of the <i> vowel sign, which is attached on the left. In the Devanāgarī vowel table below, the "Letter" column contains the symbol used when a vowel occurs without a consonant, the "Vowel sign with <p>" column contains the symbol used when a vowel is attached to a consonant, shown with the <p> letter as an example, the "Unicode name" column contains the name given in the Unicode specification for the vowel, and the "IPA" column contains the International Phonetic Alphabet character(s) corresponding to the Hindi pronunciation of the Devanāgarī character.

The vowels of the Devanāgarī script with their word-initial Devanāgarī symbol, diacritical mark with the consonant प् (/p/), pronunciation (of the vowel alone and of /p/+vowel) in International Phonetic Alphabet (IPA), equivalent in International Alphabet of Sanskrit Transliteration (IAST) and Indian languages transliteration (ITRANS) and (approximate) equivalents in Standard English are listed below:

Additional points:

• The vowel /äː/ in Sanskrit is more central and less back than the closest English equivalent, /ɑː/. The schwa (/ə/) is always short in Sanskrit.
• All vowels in Hindi, short or long, can be nasalized. All vowels can have acute, grave or circumflex pitch accent (in Vedic Sanskrit).
• In Hindi, ऋ is pronounced as /ri/. The following three vowels ऌ /r̩ː/, ऌ /l̩/ and ॡ /l̩ː/ in the table above do not occur in Hindi at all.
• Note that the ancient Sanskrit grammarians have classified the vowel system as velars, retroflexes, palatals and plosives rather than as back, central and mid vowels. Hence ए and ओ are classified respectively as palato-velar (a+i) labio-velar (a+u) vowels respectively. But the grammarians have classified them as diphthongs and in prosody, each is given two mātrās. This does not necessarily mean that they are proper diphthongs, but neither excludes the possibility that they could have been proper diphthongs at a very ancient stage. These vowels are pronounced as long /eː/ and /oː/ respectively by most learned Sanskrit Brahmins and priests of today. Other than the "four" diphthongs, Sanskrit usually disallows any other diphthongs—vowels in succession, if occur, are converted to semivowels according to predetermined rules.
• In Sanskrit and in some other dialects of Hindi (as well as in a few words in Standard Hindi), the vowel ऐ is pronounced as a diphthong /əi/ or /ai/ rather than /e:/. Similarly, the vowel औ is pronounced in some words as the diphthong /əu/ or /au/ rather than /ɔ:/. Other than these, Hindi does not have true diphthongs—two vowels might occur sequentially but then they are pronounced as two syllables (a glide might come in between while speaking). Otherwise in Standard Hindi, ऐ (ai) is long near-open front unrounded vowel: /æ/ as a in cat; औ (au) is long open-mid back rounded vowel: /ɔː/ as au in caught.
• The short open-mid front unrounded vowel (/ɛ/: as e in get), does not have any symbol or diacritic in Devanāgarī script. In several Hindi dialects, the vowel is expressed as an allophonic variant of schwa when it occurs before sounds like ha; eg., रहना is pronounced as /rɛhnä:/ instead of as /rəhənä:/. s not traditionally represented in Devanāgarī, but a new symbol has been invented for it in order to account for the pronunciation of English loanwords: ऍ(chandra): eg. पॅ).
• The short open-mid back rounded vowel (/ɔ/) is not traditionally represented in Devanāgarī, but a new symbol has been invented for it in order to account for the pronunciation of English loanwords: ऑ, eg. पॉ.
• Unicode transliteration scheme differs for some characters from IAST scheme. The differences are: ā→aa, ī→ii, ū→uu, ṛ→rr, ḹ→ll.

The table below shows the traditional listing of the Sanskrit consonants with the (nearest) equivalents in English/Spanish/Italian. The parentheses give the corresponding transliteration (of the consonant alone) in IAST scheme—the most popular one. Each consonant shown below is by default followed by the neutral vowel schwa (/ə/), and is given in the table in this form.

At the end of the traditional table of alphabets, four consonantal clusters are also added: क्ष /kʃə/ (kṣ) (in Hindi), त्र /t̪ɾə/ (tr), ज्ञ /gjə/ (jñ) (in Hindi; pronounced as /ɟɲə/ + nasalization in Sanskrit), and श्र /ɕcə/ (śc). Other than these, sounds borrowed from the other languages like Persian and Arabic are written with a dot (bindu or nukta) beneath the nearest approximate letter. They are not included in the traditional listing. Many native Hindi speakers, especially those who come from rural backgrounds and do not speak proper Khariboli or Urdu, confuse these sounds (except /ɽ/ and /ɽʱ/) and pronounce them as the nearest equivalents in Sanskritized Hindi (listed in column 5). These are:

Additional points:

• The "r" of Sanskrit is [ɹ] as in General American English. In modern Sanskrit pronunciation, the vowel "ṛ" is sometimes realised as /ri/ or /ru/, although many people (especially if their native language retains the original Sanskrit sounds, as is the case in Malayalam) do make the /r/ sound. In Hindi, /r/ is pronounced as in Spanish perro. Also note that both ऋ and ड़ use "ṛ" in IAST transliteration.
• There is no retroflex flap in Sanskrit. In modern Hindi and other Indo-Aryan languages, they have sprung up as the allophonic flap variants of Sanskrit's simple voiced retroflex plosives. The /ɳ/ (ṇ or ण) in Sanskrit is not a flap but a simple nasal stop, although it is pronounced by modern pundits while chanting as a nasal variant of the voiced retroflex flap. Hindi has two proper retroflex flaps.
• Aspiration is actually a puff of breath that may follow a plosive consonant. English speakers could try pronouncing the words "kite", "take", "chip" and "pat" with a greater-than-usual puff of breath after the first consonant. The corresponding unaspirated plosives must be pronounced with no significant puff of breath at all.
• For practicing the voiced aspirates, one could try: "drag him", "said him", "enrage him", "grab him". The voiced aspirated plosives (also called murmur stops) are extremely important and frequent in Sanskrit. Sanskrit (and its daughters) is the only language that has faithfully preserved these original Proto-Indo-European stops.
• The dental consonants in Sanskrit are as in Spanish or French. They can be pronounced by pronouncing /t/ and /d/ (of English) by pressing the tip of the tongue against the back of the teeth rather than against the back of the alveolar ridge as done by English speakers. The normal "t" and "d" in IAST transliteration are the dental stops; and they occur much, much more frequently than the retroflex stops.
• The retroflex consonants are the most difficult to pronounce. They are pronounced by curling the tongue such that its tip touches the roof of the mouth, like how Americans pronounce "r". The retroflex flaps are pronounced in a similar way, by bringing the tongue's tip to the roof of the mouth and giving it a sharp flap downwards. However, bringing the tip of the tongue a bit above the normal alveolar ridge would also work fine. The normal alveolar plosives of English /t/ and /d/ do not exist as such in Sanskrit/Hindi.
• The palatal plosives of Sanskrit/Hindi do not have a sharp frictional sound following them, as what happened in English chips and jam. These are more of pure plosives than affricates.
• Sanskrit/Hindi has no /v/. Its nearest equivalent is /ʋ/, which is very close to /v/, but does not a friction or buzzing sound associated with it. But in consonant clusters, this may allophonically change to /w/.
• The palatal sibilant of Sanskrit (IAST: ś) is very close to like the English sh in ship (although the Sanskrit phoneme is the voiceless alveolo-palatal fricative /ɕ/) while the English phoneme is the voiceless postalveolar fricative /ʃ/ with lip rounding). Today, speakers of Sanskrit vary the palatal fricative from /ɕ/ to /ʃ/. In Hindi, it is always pronounced as in ship.
• The retroflex sibilant /ʂ/ is pronounced like /ʃ/, but with the tongue curled upwards towards the roof of the mouth. In Mādhyandini branch of Yajurveda, this phoneme is allowed to be pronounced at certain places as / kʰ/. In Hindi, this is pronounced as the English sh in ship.
• The Sanskrit /ɦ/ is a voiced allophone of the normal h. In Hindi, it is pronounced as in home.

Another consonant is ळ which is not used in Hindi. It is retroflex, and used in Vedic Sanskrit, Marathi, and Marwari.

Consonant clusters of two or more phonemes are realized by combining the aksharas into ligatures. Typically, the preceding akshara loses its vertical stroke and is put in direct contact with the succeeding one. In cases of aksharas that do not have vertical strokes in their independent form, the following aksharas are usually placed underneath the preceding one. In some cases, the ligatures take forms not readily recognizable as composed of the individual aksharas (e.g. <jñ>). Consonant clusters involving <r> are treated as a special case: preceding <r-> is realized as a right-facing hook above the following akshara, and following <-r> appears as a slanted stroke attached to the vertical stroke of the preceding akshara. Similarly for a cluster /XYZa/, both X and Y would be "halved". There are many variants for this consonant cluster writing in Devanāgarī script. The most common system is shown below for the traditional table. Here the second vowel is taken to be n, followed by a /ə/.

You will only be able to see the ligatures if your system has a Unicode font installed that includes the required ligature glyphs (e.g. one of the TDIL fonts, see "external links" below).

list of "compound consonants" from Monier-Williams' 1846 Elementary Grammar

• अं (called anusvāra), pronounced as /ⁿ/ (IAST: ṃ) is used for nasalizing the vowel in the syllable, the word-final allophone of /m/ and /n/. The diacritic ँ (called chandrabindu/anunāsika) is used in certain shakhas instead of the anusvāra in certain phonetic contexts.

• अः (called visarga), pronounced as /əh/ (IAST: ḥ) is the word-final allophone of /s/ and /r/.

• If a lonely consonant needs to be written without any following vowel, it is given a halanta/virāma diacritic below (प्).

• avagraha ऽ is used in western editions to mark elision of a word-initial /a/ in sandhi.

The pitch accent of Vedic Sanskrit is written with various symbols depending on shakha. In the Rigveda, anudatta is written with a bar below the line (॒), svarita with a stroke above the line (॑) while udatta is unmarked.

There are several methods of transliteration from Devanāgarī into Roman scripts. The most widely used transliteration method is IAST. However, there are other transliteration options.

The following are the major transliteration methods for Devanāgarī:

The International Alphabet of Sanskrit Transliteration (IAST) is the academic standard for the romanization of Sanskrit. IAST is the de-facto standard used in printed publications, like books and magazines, and with the wider availability of Unicode fonts, it is also increasingly used for electronic texts. It is based on a standard established by the Congress of Orientalists at Athens in 1912.

The National Library at Kolkata romanization, intended for the romanization of all Indic scripts, is an extension of IAST.

Compared to IAST, Harvard-Kyoto looks much simpler. It does not contain all the diacritic marks that IAST contains. This makes typing in Harvard-Kyoto much easier than IAST. However, Harvard-Kyoto may look simpler, but IAST is more pleasing to eyes. Harvard-Kyoto uses capital letters that can be difficult to read in the middle of words.

ITRANS [1] is a lossless transliteration scheme of Devanāgarī into ASCII that is widely used on Usenet. It is an extension of the Harvard-Kyoto scheme. In ITRANS, the word Devanāgarī is written as "devanaagarii". ITRANS is associated with an application of the same name that enables typesetting in Indic scripts. The user inputs in roman letters and the ITRANS pre-processor displays the roman letters into Devanāgarī (or other Indic languages). The latest version of ITRANS is version 5.30 released in July, 2001.

ISCII is a fixed-length 8-bit encoding. The lower 128 codepoints are plain ASCII, the upper 128 codepoints are ISCII-specific.

It has been designed for representing not only Devanāgarī, but also various other Indic scripts as well as a Latin-based script with diacritic marks used for transliteration of the Indic scripts.

ISCII has largely been obsoleted by Unicode, which has however attempted to preserve the ISCII layout for its Indic language blocks.

See

• ISCII – IS13194:1991 [2]

The Unicode range for Devanāgarī is U+0900 .. U+097F. Grey blocks indicate characters that are undefined.

The Mac OS X operating system supports convenient editing for the Devanāgarī script by insertion of appropriate Unicode characters with two different keyboard layouts available for use. To input Devanāgarī text, one goes to System Preferences → International → Input Menu and enables the keyboard layout that is to be used. One then views the keyboard layout at the Indian Language Kit Manual at Apple Docs.

See home page

• Wikipedia:Enabling complex text support for Indic scripts

• Apple Type Services for Unicode Imaging - Macintosh
• Graphite - open source (SIL)
• HindiWriter - The Phonetic Hindi Writer with AutoWord lookup and Spellcheck for MS Word and OpenOffice.org for Windows.
• Pango - open source (GNOME)
• Uniscribe - Windows
• WorldScript - Macintosh, replaced by the Apple Type Services for Unicode Imaging, mentioned above
• Baraha - Devanāgarī Input using English Keyboard

Wikibooks has a book on the topic of: Devanagari

• omniglot.com entry
• ancientscripts.com entry

fonts

• Unicode Compliant Open Type Fonts including ligature glyphs (TDIL Data Centre)

documentation

• The official Devanāgarī Document (pdf) from Govt. Of India.
• Resources for typing in the Nepali language in Devanāgarī
• Unicode Chart for Devanāgarī
• Resources for viewing and editing Devanāgarī
• Unicode support for Web browsers
• Creating and Viewing Documents in Devanāgarī
• Hindi/Devanāgarī Script Tutor
• Devanāgarī mailing list and discussion group
• Discussion Group and email List Devanāgarī.
• A compilation of Tools and Techniques for Hindi Computing

tools and applications

• Chhahari Syllabic Unicode Editor
• Devanāgarī Tools: Wiki Sandbox, Devanagari Mail, Yahoo/Google Search & Devanāgarī Transliteration
• IndiX, Indian language support for Linux, a site by the Indian National Centre for Software Technology
• writeKA English-to-Hindi Online Transliterator
• Romanized to Unicode Devanāgarī transliterator
• HiTrans - Roman-Nagari transliteration scheme and conversion tool
• हिन्दी कलम(Hindi Kalam) Online Phonetic Transliteration based Devanagari Editor with Spell Check and Auto Suggestion facility.

The WikiProject banner below should be moved to this article's talk page. If this is a demonstration of the template, please set the parameter |category=no to prevent this page being miscategorised.

Writing systems Unassessed

This article falls within the scope of WikiProject Writing systems, a WikiProject interested in improving the encyclopaedic coverage and content of articles relating to writing systems on Wikipedia. If you would like to help out, you are welcome to drop by the project page and/or leave a query at the project’s talk page.Writing systemsWikipedia:WikiProject Writing systemsTemplate:WikiProject Writing systemsWriting system articles ??? This article has not yet received a rating on Wikipedia's content assessment scale. ??? This article has not yet received a rating on the project's importance scale.