Summary: Ctors | Methods | Inherited Methods | [Expand All]

GnssMeasurementBuilder

public final class GnssMeasurementBuilder
extends Object

java.lang.Object
↳	com.google.android.things.userdriver.location.GnssMeasurementBuilder

Builder for GnssMeasurement, which represents measurement data for an individual satellite.

Summary

Public constructors
`GnssMeasurementBuilder()`

Public methods
`GnssMeasurement`	`build()`
`GnssMeasurementBuilder`	`setAccumulatedDeltaRangeMeters(double input)` Sets the accumulated delta range since the last channel reset, in meters.
`GnssMeasurementBuilder`	`setAccumulatedDeltaRangeState(int input)` Sets 'Accumulated Delta Range' state.
`GnssMeasurementBuilder`	`setAccumulatedDeltaRangeUncertaintyMeters(double input)` Sets the accumulated delta range's 1-sigma uncertainty in meters.
`GnssMeasurementBuilder`	`setAutomaticGainControlLevelInDb(double input)` Sets the automatic gain control level in dB.
`GnssMeasurementBuilder`	`setCarrierFrequencyHz(float input)` Sets the carrier frequency of the tracked signal.
`GnssMeasurementBuilder`	`setCn0DbHz(double input)` Sets the carrier-to-noise density in dB-Hz.
`GnssMeasurementBuilder`	`setConstellationType(int input)` Sets the constellation type.
`GnssMeasurementBuilder`	`setMultipathIndicator(int input)` Sets the 'multipath' state of the event.
`GnssMeasurementBuilder`	`setPseudorangeRateMetersPerSecond(double input)` Sets the pseudorange rate at the timestamp in m/s.
`GnssMeasurementBuilder`	`setPseudorangeRateUncertaintyMetersPerSecond(double input)` Sets the pseudorange's 1-sigma rate uncertainty in m/s.
`GnssMeasurementBuilder`	`setReceivedSvTimeNanos(long input)` Sets the received GNSS satellite time, at the measurement time, in nanoseconds.
`GnssMeasurementBuilder`	`setReceivedSvTimeUncertaintyNanos(long input)` Sets the 1-sigma error estimate for the received GNSS time, in nanoseconds.
`GnssMeasurementBuilder`	`setSnrInDb(double input)` Sets the (post-correlation & integration) Signal-to-Noise ratio (SNR) in dB.
`GnssMeasurementBuilder`	`setState(int input)` Sets per-satellite sync state.
`GnssMeasurementBuilder`	`setSvid(int input)` Sets the satellite ID.
`GnssMeasurementBuilder`	`setTimeOffsetNanos(double input)` Sets the time offset at which the measurement was taken in nanoseconds.

Inherited methods

From class


  
    java.lang.Object

`Object`	`clone()` Creates and returns a copy of this object.
`boolean`	`equals(Object obj)` Indicates whether some other object is "equal to" this one.
`void`	`finalize()` Called by the garbage collector on an object when garbage collection determines that there are no more references to the object.
`final Class<?>`	`getClass()` Returns the runtime class of this `Object`.
`int`	`hashCode()` Returns a hash code value for the object.
`final void`	`notify()` Wakes up a single thread that is waiting on this object's monitor.
`final void`	`notifyAll()` Wakes up all threads that are waiting on this object's monitor.
`String`	`toString()` Returns a string representation of the object.
`final void`	`wait(long millis, int nanos)` Causes the current thread to wait until another thread invokes the `notify()` method or the `notifyAll()` method for this object, or some other thread interrupts the current thread, or a certain amount of real time has elapsed.
`final void`	`wait(long millis)` Causes the current thread to wait until either another thread invokes the `notify()` method or the `notifyAll()` method for this object, or a specified amount of time has elapsed.
`final void`	`wait()` Causes the current thread to wait until another thread invokes the `notify()` method or the `notifyAll()` method for this object.

Public constructors

GnssMeasurementBuilder

GnssMeasurementBuilder ()

Public methods

build

GnssMeasurement build ()

Returns
`GnssMeasurement`

setAccumulatedDeltaRangeMeters

GnssMeasurementBuilder setAccumulatedDeltaRangeMeters (double input)

Sets the accumulated delta range since the last channel reset, in meters.

See GnssMeasurement.getAccumulatedDeltaRangeMeters() to understand what is expected.

Parameters
`input`	`double`: the accumulated delta range for this satellite, in meters

Returns
`GnssMeasurementBuilder`

setAccumulatedDeltaRangeState

GnssMeasurementBuilder setAccumulatedDeltaRangeState (int input)

Sets 'Accumulated Delta Range' state.

See GnssMeasurement.getAccumulatedDeltaRangeState() to understand what is expected.

Parameters
`input`	`int`: the accumulated delta range state for this satellite

Returns
`GnssMeasurementBuilder`

setAccumulatedDeltaRangeUncertaintyMeters

GnssMeasurementBuilder setAccumulatedDeltaRangeUncertaintyMeters (double input)

Sets the accumulated delta range's 1-sigma uncertainty in meters.

See GnssMeasurement.getAccumulatedDeltaRangeUncertaintyMeters()) to understand what is expected.

Parameters
`input`	`double`: the accumulated delta range's 1-sigma uncertainty for this satellite, in meters

Returns
`GnssMeasurementBuilder`

setAutomaticGainControlLevelInDb

GnssMeasurementBuilder setAutomaticGainControlLevelInDb (double input)

Sets the automatic gain control level in dB.

See GnssMeasurement.getAutomaticGainControlLevelDb()) to understand what is expected.

Parameters
`input`	`double`: the automatic gain control for this satellite, in dB

Returns
`GnssMeasurementBuilder`

setCarrierFrequencyHz

GnssMeasurementBuilder setCarrierFrequencyHz (float input)

Sets the carrier frequency of the tracked signal.

See GnssMeasurement.getCarrierFrequencyHz()) to understand what is expected.

Parameters
`input`	`float`: the carrier frequency for this satellite, in Hz

Returns
`GnssMeasurementBuilder`

setCn0DbHz

GnssMeasurementBuilder setCn0DbHz (double input)

Sets the carrier-to-noise density in dB-Hz.

Typical range: 10-50 db-Hz.

Parameters
`input`	`double`: the measured C/N0 for the signal from this satellite at the antenna input

Returns
`GnssMeasurementBuilder`

setConstellationType

GnssMeasurementBuilder setConstellationType (int input)

Sets the constellation type.

The value must be one of the constants with CONSTELLATION_ prefix in GnssStatus.

Parameters
`input`	`int`: the constellation type of this satellite

Returns
`GnssMeasurementBuilder`

setMultipathIndicator

GnssMeasurementBuilder setMultipathIndicator (int input)

Sets the 'multipath' state of the event.

Parameters
`input`	`int`: the multipath state for this satellite

Returns
`GnssMeasurementBuilder`

setPseudorangeRateMetersPerSecond

GnssMeasurementBuilder setPseudorangeRateMetersPerSecond (double input)

Sets the pseudorange rate at the timestamp in m/s.

See GnssMeasurement.getPseudorangeRateMetersPerSecond() to understand what is expected.

Parameters
`input`	`double`: the pseudorange rate for this satellite, in meters per second

Returns
`GnssMeasurementBuilder`

setPseudorangeRateUncertaintyMetersPerSecond

GnssMeasurementBuilder setPseudorangeRateUncertaintyMetersPerSecond (double input)

Sets the pseudorange's 1-sigma rate uncertainty in m/s.

Represent the uncertainty as an absolute (single sided) value.

Parameters
`input`	`double`: the pseudorange's 1-sigma rate of uncertainty for this satellite in meters per second

Returns
`GnssMeasurementBuilder`

setReceivedSvTimeNanos

GnssMeasurementBuilder setReceivedSvTimeNanos (long input)

Sets the received GNSS satellite time, at the measurement time, in nanoseconds.

See GnssMeasurement.getReceivedSvTimeNanos() to understand what is expected.

Parameters
`input`	`long`: the received GNSS time for this satellite, in nanoseconds

Returns
`GnssMeasurementBuilder`

setReceivedSvTimeUncertaintyNanos

GnssMeasurementBuilder setReceivedSvTimeUncertaintyNanos (long input)

Sets the 1-sigma error estimate for the received GNSS time, in nanoseconds.

Parameters
`input`	`long`: the 1-sigma error estimate for the received GNSS time for this satellite, in nanoseconds

Returns
`GnssMeasurementBuilder`

setSnrInDb

GnssMeasurementBuilder setSnrInDb (double input)

Sets the (post-correlation & integration) Signal-to-Noise ratio (SNR) in dB.

Parameters
`input`	`double`: the SNR for this satellite, in dB

Returns
`GnssMeasurementBuilder`

setState

GnssMeasurementBuilder setState (int input)

Sets per-satellite sync state.

See GnssMeasurement.getState() to understand what is expected.

Parameters
`input`	`int`: the sync state of this satellite

Returns
`GnssMeasurementBuilder`

setSvid

GnssMeasurementBuilder setSvid (int input)

Sets the satellite ID.

See GnssMeasurement.getSvid() to understand what is expected.

Parameters
`input`	`int`: this satellite's ID

Returns
`GnssMeasurementBuilder`

setTimeOffsetNanos

GnssMeasurementBuilder setTimeOffsetNanos (double input)

Sets the time offset at which the measurement was taken in nanoseconds.

See GnssMeasurement.getTimeOffsetNanos() to understand what is expected.

Parameters
`input`	`double`: the time offset of the measurement for this satellite

Returns
`GnssMeasurementBuilder`

Interfaces
- GnssStateListener
Classes

GnssMeasurementBuilder

Summary

Public constructors

Public methods

Inherited methods

Public constructors

GnssMeasurementBuilder

Public methods

build

setAccumulatedDeltaRangeMeters

setAccumulatedDeltaRangeState

setAccumulatedDeltaRangeUncertaintyMeters

setAutomaticGainControlLevelInDb

setCarrierFrequencyHz

setCn0DbHz

setConstellationType

setMultipathIndicator

setPseudorangeRateMetersPerSecond

setPseudorangeRateUncertaintyMetersPerSecond

setReceivedSvTimeNanos

setReceivedSvTimeUncertaintyNanos

setSnrInDb

setState

setSvid

setTimeOffsetNanos

Interfaces

Classes