default search action
Production Engineering, Volume 6
Volume 6, Number 1, February 2012
- Volker Schulze, Waldemar Spomer, Chris Becke:
A voxel-based kinematic simulation model for force analyses of complex milling operations such as wobble milling. 1-9 - Frank Vollertsen
:
Effects on the deep drawing diagram in micro forming. 11-18 - F. Dörr, Mathias Liewald:
Determination of flow factors for the semi-analytical prediction of friction coefficients. 19-27 - Berend Denkena
Integrative process chain optimization using a Genetic Algorithm. 29-37 - Alexandru Dadalau, Konrad Groh, M. Reuß, Alexander Verl
Modeling linear guide systems with CoFEM: equivalent models for rolling contact. 39-46 - Nan Wang, Christoph von Kopylow, Claas Falldorf:
Rapid optical inspection of micro deep drawing parts by means of digital holography. 47-53 - Berend Denkena
Adaptive process planning. 55-67 - Gunther Reinhart, Hendrik Schellmann:
A method to determine customer-specific volume flexibility in a supply network. 69-78 - Gisela Lanza, Annabel Jondral, Ulrike Drotleff:
Valuation of increased production system performance by integrated production systems. 79-87 - Christian Brecher, Alexander Guralnik, Stephan Bäumler:
Measurement of structure dynamics using a tracking-interferometer. 89-96 - Stefan Tönissen, Fritz Klocke, Björn Feldhaus, Steffen Buchholz:
Modeling the characteristics of multi-technology platforms. 97-105
Volume 6, Number 2, April 2012
- Berend Denkena
Chip formation in grinding: an experimental study. 107-115 - Gabriele Papadia, Antonio Del Prete
Experimental springback evaluation in hydromechanical deep drawing (HDD) of large products. 117-127 - Liyang Dong, Jinying Wang, Pingyi Liu, Wenjun Wei, Haitao Li:
An NC rough turning method of an enveloping toroidal worm. 129-135 - Henry Köhler, Jens Schumacher, K. Schuischel, Knut Partes, H. Bomas, F. Jablonski, Frank Vollertsen
An approach to calculate fatigue properties of laser cladded components. 137-148 - Moriaki Sakakura, Takashi Ohnishi, Takayuki Shinoda, Kazuhito Ohashi, Shinya Tsukamoto, Ichiro Inasaki:
Temperature distribution in a workpiece during cylindrical plunge grinding. 149-155 - Peter Groche, Christian Klöpsch, Norman Möller:
Numerical analysis of the potential of deep drawing processes with hydrostatic pressure lubrication. 157-167 - Marc-André Dittrich
Exergy analysis of incremental sheet forming. 169-177 - Christian Brecher, Daniel Kolster, Werner Herfs, M. Plessow, S. Jensen:
Plug and play device integration for industrial automation with instant machine visualization using RFID technology. 179-186 - Bernd-Arno Behrens
Simulation algorithm for the assessment and modification of multi-directional forging processes and tool geometries. 187-198 - Shubham Kumar, Soumitra Paul
Numerical modelling of ground surface topography: effect of traverse and helical superabrasive grinding with touch dressing. 199-204 - Siegfried Frey, Alexandru Dadalau, Alexander Verl
Expedient modeling of ball screw feed drives. 205-211 - Sabrina Pluemer, Kathrin Voges-Schwieger, Berend Denkena
Development of an advanced micro-positioning system for increasing operation accuracy: consideration of high pressure sealing. 213-218
Volume 6, Number 3, June 2012
- Jens Kappes, Mathias Liewald, Simon Jupp, Christoph Pirchl, Roman Herstelle:
Designing superplastic forming process of a developmental AA5456 using pneumatic bulge test experiments and FE-simulation. 219-228 - Peter Groche, D. Huttel, Paul-Philipp Post, S. Schabel:
Experimental and numerical investigation of the hydroforming behavior of paperboard. 229-236 - Eckart Uhlmann, T. Hoghé:
Wear reduction at double face grinding with planetary kinematics. 237-242 - Stefan Tönissen, Fritz Klocke, Björn Feldhaus, Steffen Buchholz, Markus Weiß:
Residual stress prediction in quick point grinding. 243-249 - Knut Großmann, Sebastian Kalisch, Andreas Mühl, Steffen Rehn, Wolfgang Wilhelm:
Thermal simulation of the consolidation process of textile-reinforced thermoplastic components using homogenized parameters. 251-257 - Alexandru Dadalau, Alexander Verl
Modeling linear guide systems with CoFEM: experimental validation. 259-265 - Bernd-Arno Behrens
Influence of the fabrication method on the wear resistance of hot forging dies. 267-276 - Berend Denkena
Condition based maintenance planning of highly productive machine tools. 277-285 - Wenlei Xiao
Redundancy and optimization of a 6R robot for five-axis milling applications: singularity, joint limits and collision. 287-296 - Konrad Groh, Alexander Verl
A contribution to collision free trajectory planning for 6r robots in varying environments. 297-302 - Jürgen Fleischer
Adaptronical compensation of geometrical machine errors. 303-309 - Kirsten Bobzin, Nazlim Bagcivan, M. Ewering, R. H. Brugnara, T. Münstermann:
Influence of interlayer thickness of a thin noble metal MSIP-PVD coating on compound and system properties for glass lens moulding. 311-318 - Kai Kallio, Mika Johnsson, Olli Nevalainen:
Estimating the operation time of flexible surface mount placement machines. 319-328
Volume 6, Numbers 4-5, September 2012
- Berend Denkena
Influence of the cutting edge rounding on the chip formation process: Part 1. Investigation of material flow, process forces, and cutting temperature. 329-338 - Hanns Kache, Malte Stonis, Bernd-Arno Behrens
Development of a warm cross wedge rolling process using FEA and downsized experimental trials. 339-348 - Hendrik Puls, Fritz Klocke, Dieter Lung:
A new experimental methodology to analyse the friction behaviour at the tool-chip interface in metal cutting. 349-354 - S. Zhang, W. Li, Y. B. Guo:
Process design space for optimal surface integrity in finish hard milling of tool steel. 355-365 - Tadeusz Leppert, Ru Lin Peng:
Residual stresses in surface layer after dry and MQL turning of AISI 316L steel. 367-374 - Song Zhang, T. C. Ding, J. F. Li:
Determination of surface and in-depth residual stress distributions induced by hard milling of H13 steel. 375-383 - A. Erman Tekkaya
The non-hydrostatic response of polymer melts as a pressure medium in sheet metal forming. 385-394 - Gisela Lanza, Anna Sauer:
Simulation of personnel requirements during production ramp-up. 395-402 - Berend Denkena
Flank milling of compliant workpieces with chamfered tools. 403-412 - Katrin Nothhaft, Joungsik Suh, Matthias Golle, Ingrid Picas, Daniel Casellas
Shear cutting of press hardened steel: influence of punch chamfer on process forces, tool stresses and sheared edge qualities. 413-420 - Bernd-Arno Behrens
Fatigue analysis of a mechanical press by means of the hybrid multi-body simulation. 421-430 - Jilin Zhang, Chen Zhang, Song Guo, Laishui Zhou:
Research on tool wear detection based on machine vision in end milling process. 431-437 - Bernd-Arno Behrens
Development of an innovative monitoring system for spray fields in hot forging processes. 439-447 - Ben Münzberg, Matthias Schmidt, Sebastian Beck, Peter Nyhuis
Model based logistic monitoring for supply and assembly processes. 449-458 - Eberhard Abele, Klaus Schützer
Tool path adaption based on optical measurement data for milling with industrial robots. 459-465 - Christer-Clifford Schenke, Hajo Wiemer, Knut Großmann:
Analysis of servo-mechanic drive concepts for forming presses. 467-474 - Klemens Konrad Niehues, S. Schwarz, Michael F. Zäh
Reliable material damping ratio determination in machine tool structures. 475-484 - Berend Denkena
Process stabilization with an adaptronic spindle system. 485-492 - Reza Teimouri
Improvement of dry EDM process characteristics using artificial soft computing methodologies. 493-504 - Christian Brecher, Marcel Fey, Stephan Bäumler:
Identification method for damping parameters of roller linear guides. 505-512 - Alexander Boldering, Annika Raatz
An active tool holding device. 513-520 - Knut Großmann, Bernd Kauschinger:
Eccentric universal joints for parallel kinematic machine tools: variants and kinematic transformations. 521-529 - Franz Dietrich
An agent-based concept for planning and control of the production of carbon fibre reinforced plastics aircraft structures with mobile production units. 531-539
Volume 6, Number 6, December 2012
- Marion Merklein, Michael Lechner, Andreas Kuppert:
Enhancement of formability of aluminum alloys in multi-stage forming operations by a local intermediate heat treatment. 541-549 - Heiko Brüning, Frank Vollertsen
Mechanical flange forming in steel and copper foil. 551-558 - Tobias Föckerer, Benjamin Kolkwitz, Carsten Heinzel
Experimental and numerical analysis of transient behavior during grind-hardening of AISI 52100. 559-568 - Toufik Ameur
Modified PSO algorithm for multi-objective optimization of the cutting parameters. 569-576 - Mohammad Monir Uddin
Computation of a compact state space model for an adaptive spindle head configuration with piezo actuators using balanced truncation. 577-586 - Pascal Krebs, Gunther Reinhart:
Evaluation of interconnected production sites taking into account multidimensional uncertainties. 587-601 - Eckart Uhlmann, Jiangmin Hu:
Thermal modelling of an HSC machining centre to predict thermal error of the feed system. 603-610 - Eberhard Abele, T. Sielaff, Andreas Schiffler:
Method for chatter detection with standard PLC systems. 611-619 - Uwe Heisel, Valerii Kushner, Michael Storchak
Effect of machining conditions on specific tangential forces. 621-629 - Eberhard Abele, Christian Brecher, Stephan Cornelius Gsell, Alexander Hassis, Dennis Korff:
Steps towards a protection system for machine tool main spindles against crash-caused damages. 631-642 - Alexander Verl
Glocalized cyber physical production systems. 643-649
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.
last updated on 2024-12-17 20:59 CET by the dblp team
all metadata released as open data under CC0 1.0 license
see also: Terms of Use | Privacy Policy | Imprint
dblp was originally created in 1993 at:
since 2018, dblp has been operated and maintained by:
the dblp computer science bibliography is funded and supported by: