default search action
IEEE Transactions on Automation Science and Engineering, Volume 2
Volume 2, Number 1, January 2005
- Lingfeng Wang, Kay Chen Tan, X. D. Jiang, Y. B. Chen:
A flexible automatic test system for rotating-turbine machinery. 1-18 - Tong Liu, Michael Yu Wang:
Computation of three-dimensional rigid-body dynamics with multiple unilateral contacts using time-stepping and Gauss-Seidel methods. 19-31 - Robert F. Webbink, S. Jack Hu:
Automated generation of assembly system-design solutions. 32-39 - Jingshan Li:
Overlapping decomposition: a system-theoretic method for modeling and analysis of complex manufacturing systems. 40-53 - Roshan S. Gaonkar, Nukala Viswanadham:
Strategic sourcing and collaborative planning in Internet-enabled supply chain networks producing multigeneration products. 54-66 - Zhengmao Ye:
Artificial-intelligence approach for biomedical sample characterization using Raman spectroscopy. 67-73 - Leyuan Shi, Yunpeng Pan:
An efficient search method for job-shop scheduling problems. 73-77 - Hiroyasu Toba:
A tight flow control for job-shop fabrication lines with finite buffers. 78-83 - Myong Kee Jeong, Matt Perry, Chen Zhou:
Throughput gain with parallel flow in automated flow lines. 84-86 - Ratnesh Kumar, Vijay K. Garg:
On computation of state avoidance control for infinite state systems in assignment program framework. 87-91 - MuDer Jeng:
Comments on "Timed Petri Nets in Modeling and Analysis of Cluster Tools". 92-93
Volume 2, Number 2, April 2005
- Daniel W. Apley, Yu Ding:
A characterization of diagnosability conditions for variance components analysis in assembly operations. 101-110 - Homayoon Kazerooni, Christopher Foley:
A robotic mechanism for grasping sacks. 111-120 - Gary G. Yen
, Pedro G. DeLima:
Improving the performance of globalized dual heuristic programming for fault tolerant control through an online learning supervisor. 121-131 - Haoxun Chen, Lionel Amodeo, Feng Chu
Modeling and performance evaluation of supply chains using batch deterministic and stochastic Petri nets. 132-144 - Peter B. Luh, Danqing Yu, Sada Soorapanth
A Lagrangian relaxation based approach to schedule asset overhaul and repair services. 145-157 - Xiaoqiang Cai, Xianyi Wu
Dynamically optimal policies for stochastic scheduling subject to preemptive-repeat machine breakdowns. 158-172 - Ada Che, Chengbin Chu
Multi-degree cyclic scheduling of two robots in a no-wait flowshop. 173-183 - Gaurav Shukla, Daniel E. Whitney:
The path method for analyzing mobility and constraint of mechanisms and assemblies. 184-192 - Sangcheol Lee:
Development of a new variable remote center compliance (VRCC) with modified elastomer shear pad (ESP) for robot assembly. 193-197 - Chao-Ton Su, Peng-Sen Wang, Chun-Chin Hsu:
Effective approaches for low temperature polysilicon TFT LCD post-mapping yield control problem. 198-206
Volume 2, Number 3, July 2005
- Lalit Patil, Debasish Dutta, Ram D. Sriram:
Ontology-based exchange of product data semantics. 213-225 - Justin Raade, Hami Kazerooni:
Analysis and design of a novel hydraulic power source for mobile robots. 226-232 - Stephen Duncan, Paul D. A. Jones, Peter Wellstead:
A frequency-domain approach to determining the path separation for spray coating. 233-239 - Weihua Sheng
Tool path planning for compound surfaces in spray forming processes. 240-249 - Byungwoo Lee, Kazuhiro Saitou:
Integrated synthesis of assembly and fixture scheme for properly constrained assembly. 250-261 - Chen Song, Xiaohong Guan, Qianchuan Zhao
Machine learning approach for determining feasible plans of a remanufacturing system. 262-275 - Yong Yang, Jerry Y. H. Fuh, Han Tong Loh, Yoke San Wong:
Minimizing staircase errors in the orthogonal layered manufacturing system. 276-284 - Jin Young Choi, Spyros A. Reveliotis:
Relative value function approximation for the capacitated re-entrant line scheduling problem. 285-299 - Binayak Roy, Arin Basmajian, H. Harry Asada:
Repositioning of a rigid body with a flexible sheet and its application to an automated rehabilitation bed. 300-307
Volume 2, Number 4, October 2005
- Alan A. Desrochers, Thomas J. Deal, Maria Pia Fanti
Complex-valued token Petri nets. 309-318 - Tae-Eog Lee
An extended event graph with negative places and tokens for time window constraints. 319-332 - Ari Arapostathis
Control of Markov chains with safety bounds. 333-343 - Yunpeng Pan, Leyuan Shi:
Dual constrained single machine sequencing to minimize total weighted completion time. 344-357 - Nilmani Pramanik, Utpal Roy, Rachuri Sudarsan, Ram D. Sriram, Kevin W. Lyons:
A generic deviation-based approach for synthesis of tolerances. 358-368 - Ingo T. Pietsch, Mathias Krefft, Oliver T. Becker, Carlos Cezar Bier, Jürgen Hesselbach:
How to reach the dynamic limits of parallel robots? An autonomous control approach. 369-380 - David C. Conner, Aaron Greenfield, Prasad N. Atkar, Alfred A. Rizzi, Howie Choset:
Paint deposition modeling for trajectory planning on automotive surfaces. 381-392 - Ming J. Tsai, Jou-Lung Chang, Jian-Feng Haung:
Development of an automatic mold polishing system. 393-397 - Andrew Lim
Multi-depot vehicle routing problem: a one-stage approach. 397-402 - Peter B. Luh:
T-ASE Reviewers for 2004/2005. 403-406
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.
last updated on 2024-12-18 18:30 CET by the dblp team
all metadata released as open data under CC0 1.0 license
see also: Terms of Use | Privacy Policy | Imprint
dblp was originally created in 1993 at:
since 2018, dblp has been operated and maintained by:
the dblp computer science bibliography is funded and supported by: