Attachment ED contentType ./mediaType, ./charset language ./language data ./data url ./reference/literal size N/A (needs data type R3 proposal) hash .integrityCheck[parent::ED/integrityCheckAlgorithm="SHA-1"] title ./title/data creation N/A (needs data type R3 proposal) height .outboundRelationship[typeCode="COMP].target[classCode="OBS", moodCode="EVN",code="<CODE>"].value width .outboundRelationship[typeCode="COMP].target[classCode="OBS", moodCode="EVN",code="<CODE>"].value frames .outboundRelationship[typeCode="COMP].target[classCode="OBS", moodCode="EVN",code="<CODE>"].value duration .outboundRelationship[typeCode="COMP].target[classCode="OBS", moodCode="EVN",code="<CODE>"].value
2.1.28.3.5 Identifier
See also Base Definition , Examples , Detailed Descriptions , Profiles , Extensions and R4 Conversions
2.1.28.3.6 HL7 V2 Mapping (http://hl7.org/v2)
Identifier CX / EI (occasionally, more often EI maps to a resource id or a URL) use N/A type CX.5 system CX.4 / EI-2-4 value CX.1 / EI.1 period CX.7 + CX.8 assigner CX.4 / (CX.4,CX.9,CX.10)
2.1.28.3.7 RIM Mapping (http://hl7.org/v3)
Identifier II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] use Role.code or implied by context type Role.code or implied by context system II.root or Role.id.root value II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) period Role.effectiveTime or implied by context assigner II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper
2.1.28.3.8 ServD (http://www.omg.org/spec/ServD/1.0/)
Identifier Identifier use type system ./IdentifierType value ./Value period ./StartDate and ./EndDate assigner ./IdentifierIssuingAuthority
2.1.28.3.8.1 V3 Mapping Issues for Identifier
When mapping an HL7 v3 II datatype to a FHIR Identifier, there are two possibilities:
If the II has only a root and no extension, the FHIR Identifier will have a system of 'urn:ietf:rfc:3986' and the II.root will appear in Identifier.value
If the II has both a root and an extension, the II.root will be mapped to a URI - either a human-friendly URL or URN or (less preferred) an OID expressed as a urn, and the II.extension will be sent in Identifier.value
To search on a CDA II.root - which may appear in either Identifier.system or Identifier.value, use the syntax identifier=|[root],[root].
See v3 Mapping examples
2.1.28.3.9 Coding
See also Base Definition , Examples , Detailed Descriptions , Profiles , Extensions and R4 Conversions
2.1.28.3.10 Ontological RIM Mapping (http://hl7.org/orim)
Coding fhir:Coding rdfs:subClassOf dt:CDCoding system fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem version fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion code fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code display fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName userSelected fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
2.1.28.3.11 HL7 V2 Mapping (http://hl7.org/v2)
Coding CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 system C*E.3 version C*E.7 code C*E.1 display C*E.2 - but note this is not well followed userSelected Sometimes implied by being first
2.1.28.3.12 RIM Mapping (http://hl7.org/v3)
Coding CV system ./codeSystem version ./codeSystemVersion code ./code display CV.displayName userSelected CD.codingRationale
2.1.28.3.13 CodeableConcept
See also Base Definition , Examples , Detailed Descriptions , Profiles , Extensions and R4 Conversions
2.1.28.3.14 Ontological RIM Mapping (http://hl7.org/orim)
CodeableConcept fhir:CodeableConcept rdfs:subClassOf dt:CD coding fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding text fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
2.1.28.3.15 HL7 V2 Mapping (http://hl7.org/v2)
CodeableConcept CE/CNE/CWE coding C*E.1-8, C*E.10-22 text C*E.9. But note many systems use C*E.2 for this
2.1.28.3.16 RIM Mapping (http://hl7.org/v3)
CodeableConcept CD coding union(., ./translation) text ./originalText[mediaType/code="text/plain"]/data
2.1.28.3.17 Quantity
See also Base Definition , Examples , Detailed Descriptions , Profiles , Extensions and R4 Conversions
2.1.28.3.18 HL7 V2 Mapping (http://hl7.org/v2)
Quantity SN (see also Range) or CQ value SN.2 / CQ - N/A comparator SN.1 / CQ.1 unit (see OBX.6 etc.) / CQ.2 system (see OBX.6 etc.) / CQ.2 code (see OBX.6 etc.) / CQ.2
2.1.28.3.19 RIM Mapping (http://hl7.org/v3)
Quantity PQ, IVL<PQ>, MO, CO, depending on the values value PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value comparator IVL properties unit PQ.unit system CO.codeSystem, PQ.translation.codeSystem code PQ.code, MO.currency, PQ.translation.code
2.1.28.3.20 Money
See also Base Definition , Examples , Detailed Descriptions , Profiles , Extensions and R4 Conversions
2.1.28.3.21 HL7 V2 Mapping (http://hl7.org/v2)
Money value MO.Value currency MO.Currency
2.1.28.3.22 RIM Mapping (http://hl7.org/v3) 2.1.28.3.23 Range
See also Base Definition , Examples , Detailed Descriptions , Profiles , Extensions and R4 Conversions
2.1.28.3.24 HL7 V2 Mapping (http://hl7.org/v2)
Range NR and also possibly SN (but see also quantity) low NR.1 high NR.2
2.1.28.3.25 RIM Mapping (http://hl7.org/v3)
Range IVL<QTY[not(type="TS")]> [lowClosed="true" and highClosed="true"]or URG<QTY[not(type="TS")]> low ./low high ./high
2.1.28.3.26 Ratio
See also Base Definition , Examples , Detailed Descriptions , Profiles , Extensions and R4 Conversions
2.1.28.3.27 HL7 V2 Mapping (http://hl7.org/v2)
2.1.28.3.28 RIM Mapping (http://hl7.org/v3)
Ratio RTO numerator .numerator denominator .denominator
2.1.28.3.29 Ratio
See also Base Definition , Examples , Detailed Descriptions , Profiles , Extensions and R4 Conversions
2.1.28.3.30 HL7 V2 Mapping (http://hl7.org/v2)
RatioRange NR and also possibly SN (but see also quantity) lowNumerator NR.1 highNumerator NR.2 denominator
2.1.28.3.31 RIM Mapping (http://hl7.org/v3)
RatioRange IVL<RTO<QTY[not(type="TS")]>> [lowClosed="true" and highClosed="true"]or URG<<RTO<QTY[not(type="TS")]>> lowNumerator ./low highNumerator ./high
2.1.28.3.32 Period
See also Base Definition , Examples , Detailed Descriptions , Profiles , Extensions and R4 Conversions
2.1.28.3.33 HL7 V2 Mapping (http://hl7.org/v2)
Period DR start DR.1 end DR.2
2.1.28.3.34 RIM Mapping (http://hl7.org/v3)
Period IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] start ./low end ./high
2.1.28.3.35 SampledData
See also Base Definition , Examples , Detailed Descriptions , Profiles , Extensions and R4 Conversions
2.1.28.3.36 HL7 V2 Mapping (http://hl7.org/v2)
SampledData N/A (but see section 7.14 in v2.7) origin interval intervalUnit factor lowerLimit upperLimit dimensions codeMap offsets data
2.1.28.3.37 RIM Mapping (http://hl7.org/v3)
SampledData SLIST + GLIST origin SLIST.origin interval GLIST.increment factor SLIST.factor lowerLimit N/A (use SLIST.digits.nullFlavor) upperLimit N/A (use SLIST.digits.nullFlavor) dimensions N/A (fixed to 1) codeMap N/A offsets N/A data SLIST.digits
2.1.28.3.38 HumanName
See also Base Definition , Examples , Detailed Descriptions , Profiles , Extensions and R4 Conversions
2.1.28.3.39 HL7 V2 Mapping (http://hl7.org/v2)
HumanName XPN use XPN.7, but often indicated by which field contains the name text implied by XPN.11 family XPN.1/FN.1 given XPN.2 + XPN.3 prefix XPN.5 suffix XPN/4 period XPN.13 + XPN.14
2.1.28.3.40 RIM Mapping (http://hl7.org/v3)
HumanName EN (actually, PN) use unique(./use) text ./formatted family ./part[partType = FAM] given ./part[partType = GIV] prefix ./part[partType = PFX] suffix ./part[partType = SFX] period ./usablePeriod[type="IVL<TS>"]
2.1.28.3.41 ServD (http://www.omg.org/spec/ServD/1.0/)
HumanName ProviderName use ./NamePurpose text family ./FamilyName given ./GivenNames prefix ./TitleCode suffix period ./StartDate and ./EndDate
vCard Mappings
HumanName.text = vCard "FN" field
HumanName.use = use of the vCard "TYPE" parameter
HumanName.family, .given, .prefix, .suffix = parts of vCard "N" field. Note that there is no FHIR equivalent for the poorly defined "additional" name field. In FHIR, given names go in "middle" names
The vCard nickname corresponds to a name with the use "nickname"
2.1.28.3.42 Address
See also Base Definition , Examples , Detailed Descriptions , Profiles , Extensions and R4 Conversions
2.1.28.3.43 HL7 V2 Mapping (http://hl7.org/v2)
Address XAD use XAD.7 type XAD.18 text XAD.1 + XAD.2 + XAD.3 + XAD.4 + XAD.5 + XAD.6 line XAD.1 + XAD.2 (note: XAD.1 and XAD.2 have different meanings for a company address than for a person address) city XAD.3 district XAD.9 state XAD.4 postalCode XAD.5 country XAD.6 period XAD.12 / XAD.13 + XAD.14
2.1.28.3.44 RIM Mapping (http://hl7.org/v3)
Address AD use unique(./use) type unique(./use) text ./formatted line AD.part[parttype = AL] city AD.part[parttype = CTY] district AD.part[parttype = CNT | CPA] state AD.part[parttype = STA] postalCode AD.part[parttype = ZIP] country AD.part[parttype = CNT] period ./usablePeriod[type="IVL<TS>"]
2.1.28.3.45 vCard Mapping (http://w3.org/vcard)
Address use type address type parameter text address label parameter line street city locality district state region postalCode code country country period
2.1.28.3.46 ServD (http://www.omg.org/spec/ServD/1.0/)
Address Address use ./AddressPurpose type text line ./StreetAddress (newline delimitted) city ./Jurisdiction district state ./Region postalCode ./PostalIdentificationCode country ./Country period ./StartDate and ./EndDate
2.1.28.3.47 ContactPoint
See also Base Definition , Examples , Detailed Descriptions , Profiles , Extensions and R4 Conversions
2.1.28.3.48 HL7 V2 Mapping (http://hl7.org/v2)
ContactPoint XTN system XTN.3 value XTN.1 (or XTN.12) use XTN.2 - but often indicated by field rank n/a period N/A
2.1.28.3.49 RIM Mapping (http://hl7.org/v3)
ContactPoint TEL system ./scheme value ./url use unique(./use) rank n/a period ./usablePeriod[type="IVL<TS>"]
2.1.28.3.50 ServD (http://www.omg.org/spec/ServD/1.0/)
ContactPoint ContactPoint system ./ContactPointType value ./Value use ./ContactPointPurpose rank period ./StartDate and ./EndDate
2.1.28.3.51 Timing
See also Base Definition , Examples , Detailed Descriptions , Profiles , Extensions and R4 Conversions
2.1.28.3.52 HL7 V2 Mapping (http://hl7.org/v2)
2.1.28.3.53 RIM Mapping (http://hl7.org/v3)
Timing QSET<TS> (GTS) event QLIST<TS> repeat Implies PIVL or EIVL bounds[x] IVL(TS) used in a QSI count PIVL.count countMax PIVL.count duration PIVL.phase durationMax PIVL.phase durationUnit PIVL.phase.unit frequency PIVL.phase frequencyMax PIVL.phase period PIVL.phase periodMax PIVL.phase periodUnit PIVL.phase.unit dayOfWeek n/a timeOfDay n/a when EIVL.event offset EIVL.offset code QSC.code
2.1.28.3.54 Signature
See also Base Definition , Examples , Detailed Descriptions , Profiles , Extensions and R4 Conversions
2.1.28.3.55 RIM Mapping (http://hl7.org/v3) 2.1.28.3.56 Annotation
See also Base Definition , Examples , Detailed Descriptions , Profiles , Extensions and R4 Conversions
2.1.28.3.57 HL7 V2 Mapping (http://hl7.org/v2)
2.1.28.3.58 RIM Mapping (http://hl7.org/v3)
Annotation Act author[x] Act.participant[typeCode=AUT].role time Act.effectiveTime text Act.text