Electromechanical Bus Display Control

This project is a proof of concept code to control an electromechanical bus display using Python. The display is of the brand SPEC (model unknown) and the commands are sent using a USB to RS485 adapter.

Installation

To install the dependencies, please follow these steps:

1. Make sure you have Python and pipenv installed on your system.

2. Clone this repository to your local machine.

3. Open a terminal and navigate to the project directory.

4. Run the following command to install the dependencies:

   pipenv install

Usage

To run the code and control the electromechanical bus display, please follow these steps:

1. Make sure you have completed the installation steps mentioned above.

2. Connect the USB to RS485 adapter to your computer.

3. Open a terminal and navigate to the project directory.

4. Run the following command to execute the code:

   pipenv run python girousend.py

Contributing

Contributions are welcome! If you find any issues or have suggestions for improvements, please open an issue or submit a pull request.

License

This project is licensed under the MIT License.