I've ran into an issue where ip/ipconfig fails, so no network is configured.

Here's the entire run sequence. Pardon me for the dumb question in case I'm missing something. Let me know if possible a way around this, thanks in advance.

qemu-system-x86_64 --accel tcg -serial stdio -net user,id=user.0,hostfwd=tcp::5555-:1522,hostfwd=tcp::9999-:9,hostfwd=tcp::17010-:17010,hostfwd=tcp::1666-:1666,hostfwd=tcp::5356-:5356,hostfwd=tcp::17013-:17013 -net nic,model=virtio -m 1024 -drive id=disk,file=harvey.qcow2 -boot d
pcirouting: BIOS workaround: PCI.0.1.3 at pin 1 link 96 irq 10 -> 9
disk loader

cpu0: 2592MHz AuthenticAMD AMD-K8 (cpuid: AX 0x60FB1 DX 0x78BFBFD)
ELCR: 0C00
497M memory: 497M kernel data, 0M user, 18M swap
found partition #S/sdC0/data 0 67,108,864
disks: sdC0 sdD0
trying sdC0....

1. sdC0!9fat!9k10f
2. sdC0!9fat!9pcf
3. none of the above
   bootfile: 2
   found 9pcf
   .1217159....................................................................................................................................................+2447404...........................................................................................................................................................................................................................................................................................................+459112=4123675
   entry: 0xf0100020

Plan 9
E820: 00000000 0009fc00 memory
E820: 0009fc00 000a0000 reserved
E820: 000f0000 00100000 reserved
E820: 00100000 3ffe0000 memory
E820: 3ffe0000 40000000 reserved
E820: fffc0000 100000000 reserved
E820: fd00000000 10000000000 reserved
cpu0: 2594MHz AuthenticAMD AMD-K8 (cpuid: AX 0x60FB1 DX 0x78BFBFD)
ELCR: 0C00
intrenable: nil handler for 11, tbdf 0xC001800 for ether0
#l0: virtio: 1Gbps port 0xC000 irq 11: 525400123456
1024M memory: 256M kernel data, 767M user, 1392M swap
usbinit...usbd.../boot/usbd: /dev/usb: no hubs
no /srv/usb...no usb disk...pickmethod...read #e/nobootprompt...pickmethod done
bind #æ...bind #S...partinit...part plan9 63 67103505
p9part /dev/sdC0/data plan9
part 9fat 63 204863
part nvram 204863 204864
part fossil 204864 66054929
part swap 66054929 67103505
auth...usbinit...usbd.../boot/usbd: /dev/usb: no hubs
no /srv/usb...no usb disk...mount usbd...boot: can't open /srv/usb: '/srv/usb' file does not exist
usbpart... /dev/sdXX/ctl: rc (/boot/rc): can't open: '/dev/sdXX' file does not exist
/dev/sdXX/ctl: rc (/boot/rc): can't open: '/dev/sdXX' file does not exist
time...
fossil(#S/sdC0/fossil)...version...can't stat /srv/partfs.sdXX: '/srv/partfs.sdXX' file does not exist

init: starting /bin/rc
ipconfig: no success with DHCP
ndb/dns: can't read my ip address
aux/isvmware: '/bin/aux/isvmware' does not exist
upas/fs: opening /mail/box/glenda/mbox: '/mail/box/glenda/mbox' does not exist