[go: up one dir, main page]
Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

boot failure when usb disk is connected #4

Open
MichaelKofler opened this issue Mar 24, 2022 · 8 comments
Open

boot failure when usb disk is connected #4

MichaelKofler opened this issue Mar 24, 2022 · 8 comments

Comments

@MichaelKofler
Copy link

Not sure, if m1n1 is the right place to report this ...

I installed Asahi Linux with the installer on a Mac Mini M1 on the internal SSD. Basically works fine with the known limitations.

However, if my external USB disk is connected (which I use for time machine backups when macOS is running), the boot process fails (see photo)

asahi-boot-failure

Any ideas? I would prefer to leave the usb disk connected, as it is useful when running macOS.
@marcan marcan transferred this issue from AsahiLinux/m1n1 Mar 26, 2022
@kettenis
Copy link
Collaborator
kettenis commented Jun 7, 2022

That seems to be a long-standing bug in the U-Boot xhci driver. Not much I can do about it without hardware that reproduces the problem. I'll see what happens if I plug in some random USB devices.

Ideally the request would time out and booting would continue. That doesn't happen?

@jannau jannau mentioned this issue Sep 3, 2022
Open
@pluveto
Copy link
pluveto commented Feb 10, 2023

exactly same issue.

@jannau
Copy link
Member
jannau commented Feb 10, 2023

Please report with which USB mass storage devices this happens. It does not happen with all mass storage devices.

@zDEFz
Copy link
zDEFz commented Feb 10, 2023 •
edited
Loading

Could reproduce. Having a https://www.amazon.de/-/en/dp/B08BTTNVDG? ICY BOX 3.5" Hard Drive Enclosure Single Switchable Strapless USB 3.1 Gen2 (USB-C, USB-A) Fan Aluminum Black unit, plugging it in to a USB C port and U-Boot would halt and tells me something about an unknown XHCI error. Thinking this can be reproduced with cheaper units, of the same series, too. Happens ONLY on the USB type C Ports. I have tested with the mac mini m1. The one with 1GB ethernet. I'll look into whats reported specifically. Sec.

Looked into it via usbview. Report Starting at USB 3.1 Hub. This is collected during it being connected to USB type A. It works on USB type C too, but with C I cant reboot.
image

IB-3805-C31
Manufacturer: ICY BOX
Serial Number: redacted
Speed: 5Gb/s (super)
Bus:   2
Address:   3
USB Version:  3.10
Device Class: 00
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 9
Number of Configurations: 1
Vendor Id: 174c
Product Id: 55aa
Revision Number: 01.00

Config Number: 1
	Number of Interfaces: 1
	Attributes: c0
	MaxPower Needed: 0mA

	Interface Number: 0
		Name: uas
		Alternate Number: 1
		Class: 08
		Sub Class: 06
		Protocol: 62
		Number of Endpoints: 4

			Endpoint Address: 02
			Direction: out
			Attribute: 2
			Type: Bulk
			Max Packet Size: 1024
			Interval: 0ms

			Endpoint Address: 04
			Direction: out
			Attribute: 2
			Type: Bulk
			Max Packet Size: 1024
			Interval: 0ms

			Endpoint Address: 81
			Direction: in
			Attribute: 2
			Type: Bulk
			Max Packet Size: 1024
			Interval: 0ms

			Endpoint Address: 83
			Direction: in
			Attribute: 2
			Type: Bulk
			Max Packet Size: 1024
			Interval: 0ms

USB3.1 Hub             
Manufacturer: VIA Labs, Inc.         
Serial Number: redacted
Speed: 5Gb/s (super)
Bus:   2
Address:   4
Number of Ports: 4
USB Version:  3.20
Device Class: 09
Device Subclass: 00
Device Protocol: 03
Maximum Default Endpoint Size: 9
Number of Configurations: 1
Vendor Id: 2109
Product Id: 0822
Revision Number: 90.13

Config Number: 1
	Number of Interfaces: 1
	Attributes: e0
	MaxPower Needed: 0mA

	Interface Number: 0
		Name: hub
		Alternate Number: 0
		Class: 09
		Sub Class: 00
		Protocol: 00
		Number of Endpoints: 1

			Endpoint Address: 81
			Direction: in
			Attribute: 19
			Type: Interrupt
			Max Packet Size: 2
			Interval: 16ms

IB-3805-C31
Manufacturer: ICY BOX
Serial Number: redacted
Speed: 5Gb/s (super)
Bus:   2
Address:   5
USB Version:  3.10
Device Class: 00
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 9
Number of Configurations: 1
Vendor Id: 174c
Product Id: 55aa
Revision Number: 01.00

Config Number: 1
	Number of Interfaces: 1
	Attributes: c0
	MaxPower Needed: 0mA

	Interface Number: 0
		Name: uas
		Alternate Number: 1
		Class: 08
		Sub Class: 06
		Protocol: 62
		Number of Endpoints: 4

			Endpoint Address: 02
			Direction: out
			Attribute: 2
			Type: Bulk
			Max Packet Size: 1024
			Interval: 0ms

			Endpoint Address: 04
			Direction: out
			Attribute: 2
			Type: Bulk
			Max Packet Size: 1024
			Interval: 0ms

			Endpoint Address: 81
			Direction: in
			Attribute: 2
			Type: Bulk
			Max Packet Size: 1024
			Interval: 0ms

			Endpoint Address: 83
			Direction: in
			Attribute: 2
			Type: Bulk
			Max Packet Size: 1024
			Interval: 0ms

@zDEFz
Copy link
zDEFz commented Feb 27, 2023 •
edited
Loading

Not present on ICY BOX IB-3810-C31. Not through USB A or USB C. Log of usbview: http://ix.io/4poY
Edit: It is present, it only appears using the the USB C port.
My 2.5gbps LAN adapter connected to the USB C Port doesnt make this issues.

@zDEFz
Copy link
zDEFz commented Mar 1, 2023 •
edited
Loading

Reproduction + screenshot added.

image

reproduction.usb-c-reencoded.mp4

@mikebeaton
Copy link

I have what appears to be the same or very closely related issue, when the TESmart 4 port KVM switch is plugged into my M1 Air via a USB hub. The switch works and provides kb and mouse to macOS, Apple boot picker, and even Asahi Fedora once started. (The hub, also with a video camera attached and inbuilt ethernet port, has no effect on Asahi boot as long as the KVM switch is not plugged in.)

20240109_073307

@zDEFz
Copy link
zDEFz commented Jan 9, 2024

I have what appears to be the same or very closely related issue, when the TESmart 4 port KVM switch is plugged into my M1 Air via a USB hub. The switch works and provides kb and mouse to macOS, Apple boot picker, and even Asahi Fedora once started. (The hub, also with a video camera attached and inbuilt ethernet port, has no effect on Asahi boot as long as the KVM switch is not plugged in.)

20240109_073307

The issue is reported upstream. To register: https://lists.denx.de/listinfo/u-boot

Have a look here: https://lists.denx.de/pipermail/u-boot/2023-March/511216.html

@mikebeaton mikebeaton mentioned this issue Jan 10, 2024
Open
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
6 participants
@jannau @MichaelKofler @mikebeaton @kettenis @zDEFz @pluveto