Card marking

The first attempts to mark playing cards involved bends, crimps and tiny pinprick bumps known as "blisters", resembling the Braille script. Later, when the first designs appeared on the backs of playing cards, cheats began altering the designs on the backs of cards. Hustlers have used various inks, pigments and scratches, to add or remove lines or patterns from the back of the card design. Some varieties of card marking include block-out work, cut-out work, scroll work, shade work and tint work.

More recently, science and technology have also enhanced marked-card techniques. Modern technologies are variations of shade techniques.^{[clarification needed]} Traditional block-out and cut-out work have the disadvantage that they must be read close-up, because the marks are small. On the other hand, another advantage of luminous and juice marked-card technology^{[clarification needed]} is that they can be read close-up or from across a table.

Block-out work is simply using the same color ink as the back of the card and coloring in small white areas of the card. For example, sometimes people add ink to the flowers on the back of a card by making the petals narrower or blocking out a bird on the back design.

 

A more subtle variation on blocking, card backs can be marked by lightly tinting certain areas of a detail. Rather than blocking out the entire petal on a flower detail, the petal is washed with a light ink of a similar colour to the card ink.

Cut-out work is use of a razor to scrape off some of the printed areas of the card, such as adding (cutting out) a white bird to the back design.

• Luminous marking - These can only be read by using special gimmick sunglasses or by wearing contact lenses. The original luminous systems used red lenses and greenish ink on the back of red cards, though more recent variations use chemicals^{[clarification needed]} applied to the cards.
• Video-luminous marking - Video-luminous cards use marks that can not be seen by the human eye, even through a luminous filter. The marks can only be read by using custom-designed electronics and filters and displayed on a TV monitor in another room to a partner. Then the card values may be signaled or transmitted to the player who needs to know. Video-luminous does not have to be used for cheating. They may be used for magic or by a poker house or person who may want to analyze a card game after the fact. If collusion is suspected, the recorded images of the marked cards may be played back later to detect any unusual play. If a player consistently folds a good hand when a partner plays a better hand, then it can be assumed that collusion is taking place in the game. Since these marks cannot be seen by the human eye, there is no chance of detection of the marks, even by knowledgeable players, during the game. Often such marked decks will only be introduced by the house when suspected colluders are seated.
• Juice-marking - The marks are only visible when a person is trained to read the marks. No filtered sunglasses are required, although glasses can be used to make it easier to spot these marks.
• Tintwork or shade - This technique uses a tint solution to mark cards, but the marking patterns vary depending upon the back design of the cards being marked.
• Daub - A special paste is used by a player to mark someone else's deck, on the fly, while the cards are being used during a game and even while being watched. This eliminates the need to switch in a pre-marked deck of cards.
• Juice dust - An advanced type of daub, it may be used to make an ad hoc juiced deck. Like daub, it also allows a player to mark someone else's deck, on the fly, while being watched. The main advantages of juice dust are that it will not dull the finish of the cards and that it works on both paper and 100% plastic playing cards.^{[clarification needed]}

It is not necessary to mark the entire deck in order to gain an advantage in most types of poker - even marking just one rank (especially the aces) is enough to gain a significant advantage in a game such as Texas hold 'em.

Some marked cards can be identified by performing the gamblers' riffle test (also known as "going to the movies").^[2] Looking at the back of the cards while they are being riffled, the marks will "dance" around the back of the cards, provided that the viewer knows what sort of marks to look for. The riffle test is less effective for detecting cards marked with luminous and juice methods.

Reflected light off the back of the card will reveal cut-out work (scratches or white ink), as well as many inks or solutions that tend to dull the finish on playing cards because they are alcohol-based. Only the highest quality solutions will not burn the finish of cards. Placing a drop of alcohol on a card and then looking at the finish by reflecting light off the back reveals the dulling effect that these cheap solutions can cause.

• Bottom dealing
• Second dealing
• Edge sorting
• MindPlay