QEMU/Monitor

When QEMU is running, it provides a monitor console for interacting with QEMU. Through various commands, the monitor allows you to inspect the running guest OS, change removable media and USB devices, take screenshots and audio grabs, and control various aspects of the virtual machine.

The monitor is accessed from within QEMU by holding down the Ctrl and Alt keys (or whatever the "mouse grab" keystrokes are), and pressing Ctrl-Alt-2. Once in the monitor, Ctrl-Alt-1 switches back to the guest OS. Typing help or ? in the monitor brings up a list of all commands. Alternatively the monitor can be redirected to using the -monitor <dev> command line option. Using -monitor stdio will send the monitor to the standard output, this is most useful when using qemu on the command line.

Help and information

help

help [command] or ? [command]

With no arguments, the help command lists all commands available. For more detail about another command, type help command, e.g.

(qemu) help info

On a small screen / VM window, the list of commands will scroll off the screen too quickly to let you read them. To scroll back and forth so that you can read the whole list, hold down the control key and press Page Up and Page Down.

info

info option

Show information on some aspect of the guest OS. Available options are:

block – block devices such as hard drives, floppy drives, cdrom
blockstats – read and write statistics on block devices
capture – active capturing (audio grabs)
history – console command history
irq – statistics on interrupts (if compiled into QEMU)
jit – statistics on QEMU's Just In Time compiler
kqemu – whether the kqemu kernel module is being utilised
mem – list the active virtual memory mappings
mice – mouse on the guest that is receiving events
network – network devices and VLANs
pci – PCI devices being emulated
pcmcia – PCMCIA card devices
pic – state of i8259 (PIC)
profile – info on the internal profiler, if compiled into QEMU
registers – the CPU registers
snapshots – list the VM snapshots
tlb – list the TLB (Translation Lookaside Buffer), i.e. mappings between physical memory and virtual memory
usb – USB devices on the virtual USB hub
usbhost – USB devices on the host OS
version – QEMU version number
vnc – VNC information

Devices

change

change device setting

The change command allows you to change removable media (like CD-ROMs), change the display options for a VNC, and change the password used on a VNC.

When you need to change the disc in a CD or DVD drive, or switch between different .iso files, find the name of the CD or DVD drive using info and use change to make the change.

(qemu) info block
ide0-hd0: type=hd removable=0 file=/path/to/winxp.img
ide0-hd1: type=hd removable=0 file=/path/to/pagefile.raw
ide1-hd1: type=hd removable=0 file=/path/to/testing_data.img
ide1-cd0: type=cdrom removable=1 locked=0 file=/dev/sr0 ro=1 drv=host_device
floppy0: type=floppy removable=1 locked=0 [not inserted]
sd0: type=floppy removable=1 locked=0 [not inserted]
(qemu) change ide1-cd0 /path/to/my.iso
(qemu) change ide1-cd0 /dev/sr0 host_device

eject

eject [-f] device

Use the eject command to release the device or file connected to the removable media device specified. The -f parameter can be used to force it if it initially refuses!

block_resize

Notify QEMU that a block device has been resized.

$ info block
drive-virtio-disk3 (#block790): /guest/mud_vdd (raw)
$ block_resize  drive-virtio-disk3  16G

usb_add

Add a host file as USB flash device ( you need to create in advance the host file: dd if=/dev/zero of=/tmp/disk.usb bs=1024k count=32 )

usb_add disk:/tmp/disk.usb

usb_del

use info usb to get the usb device list

(qemu) info usb
Device 0.1, Speed 480 Mb/s, Product XXXXXX
Device 0.2, Speed 12 Mb/s, Product XXXXX

(qemu) usb_del 0.2

This deletes the device

mouse_move

Sends Mouse Movevment events to guest. mouse_move dx dy [dz] -- send mouse move events. Example: [qemu]mouse_move -20 20

mouse_button

mouse_set index

sendkey keys

You can emulate keyboard events through sendkey command. The syntax is: sendkey keys. To get a list of keys, type sendkey [tab]. Examples:

sendkey a
sendkey shift-a
sendkey ctrl-u
sendkey ctrl-alt-f1

As of QEMU 0.12.5 there are:

shift	shift_r	alt	alt_r	altgr	altgr_r
ctrl	ctrl_r	menu	esc	1	2
3	4	5	6	7	8
9	0	minus	equal	backspace	tab
q	w	e	r	t	y
u	i	o	p	ret	a
s	d	f	g	h	j
k	l	z	x	c	v
b	n	m	comma	dot	slash
asterisk	spc	caps_lock	f1	f2	f3
f4	f5	f6	f7	f8	f9
f10	num_lock	scroll_lock	kp_divide	kp_multiply	kp_subtract
kp_add	kp_enter	kp_decimal	sysrq	kp_0	kp_1
kp_2	kp_3	kp_4	kp_5	kp_6	kp_7
kp_8	kp_9	<	f11	f12	print
home	pgup	pgdn	end	left	up
down	right	insert	delete

Screen and audio grabs

screendump

screendump filename

Capture a screendump and save into a PPM image file.

wavcapture

wavcapture filename

Capture the sound of the vm and save it into a specified .wav file.

stopcapture

stopcapture index

Stop recording the wavcapture. Index of the first wavcapture is 0.

Virtual machine

commit

commit device or commit all

When running QEMU with the -snapshot option, commit changes to the device, or all devices.

quit

quit or q

Quit QEMU immediately.

savevm

savevm name

Save the virtual machine as the tag 'name'. Not all filesystems support this. raw does not, but qcow2 does.

loadvm

loadvm name

Load the virtual machine tagged 'name'. This can also be done on the command line: -loadvm name

With the info snapshots command, you can request a list of available machines.

delvm

Remove the virtual machine tagged 'name'.

stop

Suspend execution of VM

cont

Reverse a previous stop command - resume execution of VM.

system_reset

This has an effect similar to the physical reset button on a PC. Warning: Filesystems may be left in an unclean state.

system_powerdown

This has an effect similar to the physical power button on a modern PC. The VM will get an ACPI shutdown request and usually shutdown cleanly.

log

log option

logfile

logfile filename

Write logs to specified file instead of the default path, /tmp/qemu.log .

gdbserver

Starts a remote debugger session for the GNU debugger (gdb). To connect to it from the host machine, run the following commands:

shell$ gdb qemuKernelFile
(gdb) target remote localhost:1234

x

x /format address

Displays memory at the specified virtual address using the specified format.

Refer to the xp section for details on format and address.

xp

xp /format address

Displays memory at the specified physical address using the specified format.

format: Used to specify the output format the displayed memory. The format is broken down as /[count][data_format][size]

count: number of item to display (base 10)
data_format: 'x' for hex, 'd' for decimal, 'u' for unsigned decimal, 'o' for octal, 'c' for char and 'i' for (disassembled) processor instructions
size: 'b' for 8 bits, 'h' for 16 bits, 'w' for 32 bits or 'g' for 64 bits. On x86 'h' and 'w' can select instruction disassembly code formats.

address:

Direct address, for example: 0x20000
Register, for example: $eip

Example - Display 3 instructions on an x86 processor starting at the current instruction:

(qemu) xp /3i $eip

Example - Display the last 20 words on the stack for an x86 processor:

(qemu) xp /20wx $esp

print

Print (or p), evaluates and prints the expression given to it. The result will be printed in hexadecimal, but decimal can also be used in the expression. If the result overflows it will wrap around. To use a the value in a CPU register use $<register name>. The name of the register should be lower case. You can see registers with the info registers command.

Example of qemu simulating an i386.

(qemu) print 16
0x10
(qemu) print 16 + 0x10
0x20
(qemu) print $eax
0xc02e4000
(qemu) print $eax + 2
0xc02e4002
(qemu) print ($eax + 2) * 2
0x805c8004
(qemu) print 0x80000000 * 2
0

More information on the architecture specific register names can be found from the below qemu source file

http://git.qemu.org/?p=qemu.git;a=blob;f=monitor.c;h=1266ba06fb032cb0e7c9dbaa1b6d22cd9047c6b4;hb=HEAD#l3044

sum

Usage: sum <address> <size>
Computes the checksum of the specified memory region

memsave

Usage: memsave <address> <size> <filename>

Links

Monitor in QEMU documentation: https://www.qemu.org/docs/master/system/monitor.html