Chrysler New Yorker

Chrysler New Yorker
1957 Chrysler New Yorker
Overview
Manufacturer	Chrysler Corporation
Model years	1940–1942 1946–1996
Body and chassis
Class	Full-size (1940–1981, 1994–1996) Mid-size (1983–1993)
Layout	FR layout (1940–1982) FF layout (1983–1996)
Chronology
Successor	Chrysler LHS

The Chrysler New Yorker is an automobile model produced by Chrysler from 1940 until 1996, serving for several decades as either the brand's flagship model or as a junior sedan to the Chrysler Imperial, the latter during the years in which the Imperial name was used within the Chrysler lineup rather than as a standalone brand.

A trim level named the "New York Special" first appeared in 1938, while the "New Yorker" name debuted in 1939. The New Yorker helped define the Chrysler brand as a maker of upscale models that were priced and equipped to compete against upper-level models from Buick, Oldsmobile, and Mercury.

The New Yorker was Chrysler's most prestigious model throughout most of its run. Over the decades, it was available in several body styles, including sedan, coupe, convertible, and wagon.

Until its discontinuation in 1996, the New Yorker was the longest-running American car nameplate.^[1]

Series C-19 / C-23 / C-26 / C-30 / C-36
1938 Chrysler New Yorker Special
Overview
Model years	1940–1942 (from 1938 as a version of the Imperial)
Assembly	Jefferson Avenue Assembly Detroit, Michigan
Body and chassis
Body style	2/4-door sedan 2-door coupe 2-door convertible
Layout	FR layout
Related	Chrysler Imperial Chrysler Saratoga Chrysler Royal Chrysler Thunderbolt
Powertrain
Engine	298.7 cu in (4.9 L) Chrysler Straight Eight 323.5 cu in (5.3 L) Chrysler Straight Eight
Transmission	3-speed manual w/Cruise and Climb overdrive
Dimensions
Wheelbase	125 in (3,175 mm) (1938-1939) 128.5 in (3,264 mm) (1940) 127.5 in (3,238 mm) (1941-1942)

The New York Special Series C19 was introduced as a distinct sub-series of the 1938 Chrysler Imperial. It was available as a four-door sedan with a 298.7 cu in (4.9 L) straight-eight engine and a generous amount of comfort and space for the passengers, and a two-door Business Coupe - though no records show one was ordered and built.^[2] Unique broadcloth upholstery was specific to the New York Special, offering two single-color exterior paint or four two-tone color combinations. Instrument panels were highly polished woodgrain finish and were harmonized with the upholstery colors.^[2][3] For 1939 it was expanded with two more coupe versions and a two-door sedan and a larger, more powerful engine from Imperial,^[2] and it took on the "New Yorker" name, dropping the "Special" tag.^[4] Prices ranged from US$1,223 ($26,789 in 2023 dollars ^[5]) for the two-passenger two-door coupe^[2] to US$1,298 ($28,432 in 2023 dollars ^[5]) for the four-door sedan.^[2]

The first convertibles were introduced with the all-new body design of the 1940 models. This, the C26 series, was the first New Yorker to be considered a standalone model rather than as an Imperial version.^[6] It also saw the introduction of Fluid Drive, a fluid coupling between the engine and the clutch. It featured an independent front coil suspension and a beam axle in the rear. The only transmission available was the basic three-speed manual. The "New Yorker Highlander", included tartan seats and other interior elements, and the same interior treatment was on the Windsor Highlander, but an I6 engine powered it.^[7] Interior color choices were blue, green, brown, and maroon for the cloth upholstery while the headliner, interior rear quarter panels, and door panels were trimmed in a lighter, contrasting shade of upholstery color.

Lightly redesigned bodies were introduced for 1941, with the business coupe now being a three-window design. The bodies were all marginally wider and lower, with increased glass surfaces. Another new model was the Town Sedan with the rear doors hinged at the forward edge of the doors. This year, the Vacamatic was made available. However, unlike the version sold on six-cylinder models, the Saratoga/New Yorker version was a three-speed transmission with overdrive called "Cruise and Climb".

With America entering World War II on 11 December 1941, all automobile production ended at the beginning of February 1942. Thus, the 1942 model year was roughly half the usual length. Cars built after December 1941 had blackout trim.^[6] The 1942 Chryslers were relatively modern, with a design that heralded the post-war ponton style with fenders more incorporated into the bodywork. The grille consisted of five horizontal chrome bars wrapped around the front, reaching to the leading edge of the front wheelwel A total of 12,145 New Yorkers of the C36 series were built this year.^[6] Chrysler would produce and experiment with engines for tanks and aircraft during World War II.

• 
  1939 Chrysler New Yorker 4-door sedan
• 
  1940 New Yorker Highlander convertible coupe
• 
  1941 Chrysler New Yorker convertible coupé
• 
  1942 Chrysler New Yorker 4-door sedan

Series C-39
1947 Chrysler New Yorker Highlander convertible
Overview
Model years	1946–1948
Assembly	Jefferson Avenue Assembly Detroit, Michigan (starting 1948) Los Angeles (Maywood) Assembly Los Angeles, California
Body and chassis
Body style	4-door sedan 2-door brougham sedan 2-door coupe 2-door convertible
Layout	FR layout
Related	Chrysler Imperial Chrysler Saratoga Chrysler Newport Phaeton Chrysler Windsor Chrysler Royal DeSoto Custom
Powertrain
Engine	323.5 cu in (5.3 L) Chrysler Straight Eight
Transmission	3-speed manual w/optional Fluid Drive Presto-Matic 4-speed semi-automatic
Dimensions
Wheelbase	127.5 in (3,238 mm)
Length	214.3 in (5,443 mm)
Width	77.8 in (1,976 mm)

When production resumed after World War II in 1946, the New Yorker became Chrysler's top luxury trim package, while the Imperial Crown offered New Yorker levels of luxury with an extended 145 in (3,683 mm) wheelbase. Unlike most car companies, Chrysler did not make significant changes with each model year from 1946 through 1948. Thus, from 1946 through 1948, Chryslers had the same basic appearance, characterized by their die-cast 'harmonica' grille and based on the body introduced with the 1941 models. 1947 saw a minor redesign in tires, trim, and instrument panel, while the first 1948s were just 1947s with no visible changes. Postwar Chryslers continued to offer Fluid Drive, with the New Yorker now offering the Presto-Matic four-speed semi-automatic transmission.^[8][9][10]

Chrysler offered the New Yorker as the luxury car to compete with the Cadillac Series 61, Buick Roadmaster, and Packard Super Clipper listing the four-door sedan at US$2,073 ($28,287 in 2023 dollars ^[5]) before optional equipment.^[8] The Chrysler Saratoga featured the larger eight-cylinder engine but with a lower trim level and interior features.^[8] Six-cylinder engines with higher grade interior and appearance were offered as Chrysler Royal short wheelbase or the longer wheelbase Chrysler Windsor .^[8] The Chrysler Town and Country models included exterior wood body panels with luxurious appearance until the line became exclusively as a station wagon.^[8]

The two-door sedan was available in three variations, and the body styles were shared with DeSoto, Dodge, and Plymouth branded models. The styles were a three-passenger Coupe, a six-passenger Club Coupe with a sloping rear roof, and a six-passenger brougham sedan with a formal rear roof appearance.^[8]

• 
  1947 Chrysler New Yorker coupe
• 
  1948 Chrysler New Yorker 4-door sedan

Series C46N / C52 / C56 / C63
1949 Chrysler New Yorker Town & Country convertible coupe (C46 Series)
Overview
Model years	1949–1954
Assembly	Jefferson Avenue Assembly Detroit, Michigan Los Angeles (Maywood) Assembly Los Angeles, California
Designer	K.T. Keller
Body and chassis
Body style	4-door sedan 2-door coupe 2-door hardtop 2-door convertible 4-door station wagon
Layout	FR layout
Related	Chrysler Imperial Chrysler Town and Country Chrysler Saratoga Chrysler Windsor Chrysler Royal DeSoto Custom DeSoto Firedome DeSoto Powermaster
Powertrain
Engine	323.5 cu in (5.3 L) Spitfire Straight Eight 331 cu in (5.4 L) FirePower V8
Transmission	4-speed Presto-Matic 4-speed Fluid Drive
Dimensions
Wheelbase	131.5 in (3,340 mm) & 125.5 in (3,190 mm)[11]
Length	211.75 in (5,378 mm) (1949–1950);[11] 213.25 in (5,417 mm) (1951–1952)[12][13]
Width	75.12 in (1,908 mm) (1949–1952);[12] 76.25 in (1,937 mm) (1953)[14]
Height	62.75 in (1,594 mm) (1953)[14]

The 1949 model year New Yorker used Chrysler Corporation's new postwar body with ponton three-box styling, which was shared with Dodge and DeSoto. The engine remained the 323.5 cu in (5.3 L) straight eight coupled to Fluid Drive and the Presto-Matic four-speed semi-automatic. Body styles were reduced to club coupe, four-door sedan, and convertible. The wheelbase on the New Yorker was increased to 131.5 in (3,340 mm) from the 127.5 in (3,240 mm) frame introduced in 1941. The previous design had been carried through early 1949, with the new (C46) series having been delayed due to a strike in late 1948.^[15] A padded dashboard was optional.^[16]

A new body style was introduced for 1950, a two-door hardtop, called the Newport and the Special Club coupe. Further upgrades included foam rubber padding on the dashboard for safety.^[17] The New Yorker was the more deluxe of the regular eight-cylinder Chryslers. At the same time, the Saratoga was repositioned as lower in the hierarchy, offering the straight eight with plainer trim with cloth upholstery available in several colors, the 135 hp (101 kW) Spitfire straight-eight engine, and a roomy interior featuring "chair height" seats. The "Presto-Matic" fluid drive transmission had two forward ranges, each with two speeds. In everyday driving, the high range was engaged using the clutch. The car could then be driven without using the clutch (unless reverse or low range was required); at any speed above 13 mph (21 km/h), the driver released the accelerator, and the transmission shifted into the higher gear of the range with a slight "clunk". When the car came to a stop, the lower gear was again engaged.

Chrysler introduced the 180 hp (134 kW) FirePower Hemi V8 for 1951.^[18] The FirePower Hemi equipped cars could accelerate 0 to 60 mph (97 km/h) in 10 seconds, faster than the Oldsmobile 88 Rocket engine of that time.^{[citation needed]} This engine became popular among hot rodders and racers.

The New Yorker also offered Fluid Torque Drive, with an actual torque converter, instead of the Fluid Drive units. Cars with Fluid Torque Drive came only with Fluid Matic semi-automatic transmission and had a gear selector quadrant on the steering column. Hydraguide power steering, an industry first, appeared as an option^[19] on Chrysler cars with the Hemi engine.

A station wagon was available for 1951, with only 251 built. Its 131.5 in (3,340 mm) wheelbase is the longest ever used on a station wagon.^[8]

The 1952 model year included a minor redesign of taillights with backup lights in the lower section. This was also the final year for the 131.5 in (3,340 mm) wheelbase chassis for the New Yorker.

Harold A. Clark used a New Yorker as the base for a full-size sports car called the "Clark Cyclonic". The price was approximately $15,000 ($170,609 in 2023 dollars ^[5]), and Clark planned to produce 48 during the first year. Whether this car ever reached production is not known.^[20]

The 1953 model year New Yorker had a less bulky look with the wheelbase reduced to 125.5 in (3,190 mm), a one-piece curved windshield, rear fenders integrated into the body, and pull-style exterior door handles.^[14] Wire wheels were now an option. The Saratoga line was discontinued for 1953, and replaced by the New Yorker. The previous New Yorker model positioning was redesignated as the New Yorker DeLuxe. The convertible and Newport hardtop were available only in the New Yorker DeLuxe line while the base New Yorker offered a long-wheelbase sedan and a Town & Country wagon. The convertible was New Yorker's most expensive model on the 125.5 in (3,190 mm) chassis for 1953, with 950 built.

The six cylinder was replaced in 1954 with the popular 195 hp (145 kW) FirePower V8; a DeLuxe option was rated at 235 hp (175 kW). Although introduced very late in the 1953 model year, all 1954 New Yorkers were available with the new two-speed Powerflite automatic transmission. Fluid Torque Drive and Fluid Matic were dropped. 1954 was the last year the long-wheelbase sedan was offered by Chrysler.

• 
  1949 Chrysler New Yorker Coupe (C39 Series)
• 
  1949 Chrysler New Yorker Four Door Sedan (C46 Series)
• 
  1950 Chrysler New Yorker Four-Door Sedan (C46 Series)
• 
  1951 Chrysler New Yorker convertible
• 
  1954 Chrysler New Yorker
• 
  1954 Chrysler New Yorker

Series C-68 / C-72
1955 Chrysler New Yorker 4-door sedan
Overview
Model years	1955–1956
Assembly	Jefferson Avenue Assembly Detroit, Michigan Los Angeles (Maywood) Assembly Los Angeles, California
Body and chassis
Body style	2-door hardtop 2-door convertible 4-door sedan 4-door hardtop 4-door station wagon
Layout	FR layout
Related	Chrysler 300 Chrysler Town and Country Chrysler Windsor DeSoto Fireflite DeSoto Firedome DeSoto Adventurer (concept car) Chrysler Falcon
Powertrain
Engine	331 cu in (5.4 L) FirePower V8 354 cu in (5.8 L) Hemi-V8
Transmission	2-speed PowerFlite automatic (1955) 3-speed TorqueFlite automatic (1956)
Dimensions
Wheelbase	126.0 in (3,200 mm)
Length	218.8 in (5,558 mm) (1955–1956)[21]
Width	79 in (2,007 mm)[21]

For the 1955 model year, Chrysler introduced new designs that borrowed styling cues from Virgil Exner's custom 1952 Imperial Parade Phaeton. These replaced the out-of-fashion high roofline designs of K.T. Keller. Additionally, the Imperial luxury brand was reintroduced. A new four-door hardtop body style became available. The tradition of adding the Newport as a suffix to the model name continued, while the "St. Regis" nameplate was used for hardtops with exclusive two-tone paint.^[8] The Hemi V8's output was up to 250 hp (186 kW), another step forward in Detroit's ongoing horsepower war, while the Chrysler 300 offered higher amounts of horsepower from the same displacement engine. The PowerFlite transmission added a control lever on the instrument panel for 1955.^[22]

All New Yorkers for 1955 were now given the "DeLuxe" suffix, and the Imperial Newport two-door hardtop replaced the Club Coupe. The new, higher-priced St. Regis two-door hardtop filled the position of the former Chrysler Windsor. The sedan, convertible, and Town & Country wagon were offered.^[22]

Chrysler described the 1956 model year's design "PowerStyle," a product of Chrysler designer Virgil Exner. The New Yorker gained a new mesh grille, leather seats, pushbutton TorqueFlite selector, and a 354 cubic inch Hemi V8 with 280 hp (209 kW). A four-door pillarless hardtop made its debut, and the "DeLuxe" nameplate was dropped from the New Yorker for 1956.^[8][22]

Chrysler introduced an under-dash mounted 16 2/3 rpm record player, dubbed the "Highway Hi-Fi", that was manufactured by CBS Electronics. A two-way switch in the dash changed the input for the speaker from the all-transistor radio to the 7-inch record player. The St. Regis two-door hardtop was available with a choice of nine optional three-tone paint schemes,^[8] and the Town and Country Wagon model was Chrysler's most expensive vehicle labeled as a Chrysler for 1956, listed at $4,523.^[8] Only 921 convertibles were made.^[22][8]

• 
  1955 Chrysler New Yorker Deluxe St. Regis hardtop coupe
• 
  1955 Chrysler New Yorker interior
• 
  1956 Chrysler New Yorker St. Regis convertible coupe
• 
  1956 Chrysler New Yorker Town & Country

Series C-76 / LC3-H / MC3-H
1957 Chrysler New Yorker 2-door hardtop
Overview
Model years	1957–1959
Assembly	Jefferson Avenue Assembly Detroit, Michigan Los Angeles (Maywood) Assembly Los Angeles, California
Body and chassis
Body style	2-door hardtop 2-door convertible 4-door sedan 4-door hardtop 4-door station wagon
Layout	FR layout
Related	Chrysler 300 Chrysler Town and Country Chrysler Saratoga Chrysler Windsor DeSoto Adventurer DeSoto Fireflite DeSoto Firedome
Powertrain
Engine	392 cu in (6.4 L) Hemi-V8 413 cu in (6.8 L) Wedge V8
Transmission	3-speed TorqueFlite automatic
Dimensions
Wheelbase	126.0 in (3,200 mm)
Length	219.2 in (1957)[23] 220.9 in (1959)[24]

The 1957 model year Chrysler cars were redesigned with Virgil Exner's "Forward Look" at the cost of $300 million when Chrysler took on a loan in 1954 from Prudential Insurance to pay for expansion and updated car designs.^[25][26][27] The New Yorker sported fins that swept up from just behind the front doors. Its Hemi V8 was increased to 392 cu in (6.4 L) and 325 hp (242 kW). The TorqueFlite three-speed automatic transmission and a Torsion-Aire torsion bar front suspension were standard.

Early model year production had single headlamps with quad headlamps optional where state regulations permitted them. The single headlamps were dropped later in the year.^[28] A total of 10,948 New Yorkers were built, 1,049 of them convertibles.

The 1958 New Yorker received new body-side trim and smaller taillights. The Hemi output was up again, to 345 hp (257 kW). "Auto-Pilot" cruise control was introduced.^[29] Sales decreased due to the recession of 1958. The convertible model was still available, with only 666 made.^[30] The reputation of Chrysler cars became tainted because of rust problems caused by rushed production and testing.^{[citation needed]}

The FirePower Hemi V8 was replaced in 1959 New Yorkers by a new, less expensive to produce wedge head 413 cu in (6.8 L) 350 hp (261 kW) Golden Lion V8. Tailfins and the front end were altered. With the departure of the Hemi the New Yorker line was repositioned as a luxury car with styling similar to the Imperial of 1958.

• 
  1957 Chrysler New Yorker 2-door hardtop rear
• 
  1958 Chrysler New Yorker 4-door hardtop
• 
  1958 Chrysler New Yorker Convertible
• 
  1959 Chrysler New Yorker 4-door hardtop

Series PC3-H / RC3-H / SC3-H / TC3-H / VC3-H
1960 Chrysler New Yorker 2-door hardtop
Overview
Model years	1960–1964
Assembly	Jefferson Avenue Assembly Detroit, Michigan Los Angeles (Maywood) Assembly Los Angeles, California
Body and chassis
Body style	2-door hardtop 2-door convertible 4-door sedan 4-door hardtop 4-door hardtop station wagon
Layout	FR layout
Related	Imperial Crown & Le Baron Chrysler 300 Chrysler Town and Country Chrysler Saratoga Chrysler Windsor Chrysler Newport Dodge Custom 880 Plymouth Fury
Powertrain
Engine	413 cu in (6.8 L) Wedge V8
Dimensions
Wheelbase	126.0 in (3,200 mm) 1963–64: 122.0 in (3,099 mm)

The 1960 model year New Yorkers used unibody construction, and the carry-over RB engine had an output of 350 hp (261 kW). Starting with 1960, all Chrysler models adopted the grille appearance from the Chrysler 300F. The rear bucket seats from the 300 models 300 were optional on the New Yorker Custom coupe.

The New Yorker 1961 model year featured a new grille, slanted headlights, and a continental kit appearance on the trunk lid. The 413 CID "RB" Golden Lion V8 continued. This was the last of the "Forward Look" models. Chrysler built 2,541 New Yorker two-door hardtops, in Canada through 1964 and 1965 in the U.S., and no longer used the nameplate "Newport" for hardtop models when the Chrysler Newport became its model line.^[22]

The program to create all-new Chryslers for the 1962 model year was abruptly canceled in 1960. The alternative, as detailed by Chrysler designer Jeffrey I. Godshall, was instead to take the Chrysler Corporation's full-sized 1961 models and literally "mix-and-match" them to create the 1962 Chryslers.^[31] The 1962 model year New Yorkers would only be offered as four-door models. Thus, both the 1962 hardtop sedan and the pillared sedan were made by taking the front end of a 1961 New Yorker (updated for 1962) and mating it to the de-finned body of a corresponding 1961 Dodge Polara four-door sedan.^[31] The Polara, which was Dodge's only long-wheelbase model, was chosen because its body's smoother sides proved to be easier to work with when creating a finless body, a significant requirement for the redesign. The 1961 Polara's existing tailfins and taillights were replaced by redesigned rear-quarter panels, which furnished the 1962 New Yorkers with finless rear fenders and new taillights. Similarly, the 1962 New Yorker station wagon was made by mating an updated front end of a 1961 New Yorker to the body of a 1961 Plymouth Suburban four-door station wagon.^[31] A Plymouth station wagon was Plymouth's only long-wheelbase offering, and it was chosen because it was Chrysler Corporation's only finless full-sized station wagon. Thus, only four-door New Yorkers were offered in wagon, sedan, and hardtop body styles.

The 1962 New Yorker was the last Chrysler to have a 126 in (3,200 mm) wheelbase.^[32]

The dash had been designed with Chrysler's push-button controls for the TorqueFlite automatic in mind, with the "AstraDome" instrument cluster covering the part of the steering column a column shifter would come out from under then-standard practice, so manual cars used a floor shifter.^[33] Due to the installation of the "AstraDome" instrument cluster extending outward towards the steering wheel, the traditional installation of the turn signal lever was relocated to the dashboard underneath the "TorqueFlite" push-button gear selectors and was installed as a sliding lever that would return to center as the steering wheel returned to the center position.

The 413 RB had a 4.1875 in (106 mm) bore and was used from 1959 until 1965. It powered all Chrysler New Yorker, 300G & 300H, and Imperial Custom, Crown, and Le Baron models during that period. It was also available on the Chrysler Newport, Dodge's Polara and Monaco, and the Plymouth Fury as an alternative to the 383-cubic-inch B series engine or the 318 Poly. With a compression ratio of 10:1, it developed 340 hp (254 kW) and 470 lb⋅ft (637 N⋅m) of torque with a four-barrel carburetor.

• 
  1960 Chrysler New Yorker Town & Country
• 
  1960 Chrysler New Yorker Town & Country hardtop station wagon interior
• 
  1961 Chrysler New Yorker convertible
• 
  1962 Chrysler New Yorker

The 1963 model year New Yorker used Chrysler's wholly redesigned body with only the windshield showing traces of the previous Forward Look designs. However, platform changes were minimal, with just a switch from 12-inch "Total Contact" to Bendix-made 11-inch Duo-Servo brakes.

A new, more luxurious Salon four-door hardtop was added at midyear as a trim package in the U.. Engine output was 340 hp (254 kW) and the wheelbase was 122 in (3,100 mm).^[22]

Chrysler sales increased 1963 due to introducing a five-year/50,000-mile warranty, a business practice unmatched by the competitors in the 1960s.

Changes for the 1964 model year included a new grille, a larger rear window, and small tailfins giving the car a boxier look from the side. Canadians were given the choice of a new two-door hardtop, while Americans continued with the Salon option for the four-door pillarless hardtop. A convertible body style was no longer offered.^[34]

• 
  1963 Chrysler New Yorker 4-door hardtop
• 
  1964 Chrysler New Yorker 4-door hardtop

Series AC3-H / BC3-H / CC3-H / DC3-H
1965 Chrysler New Yorker 4-door Town Sedan (6-window)
Overview
Model years	1965–1968
Assembly	Jefferson Avenue Assembly Detroit, Michigan Belvidere Assembly Plant, Belvidere, Illinois
Body and chassis
Body style	4-door sedan 2-door hardtop 4-door hardtop 4-door station wagon
Layout	FR layout
Platform	C-body
Related	Imperial Chrysler 300L coupe Chrysler 300 (four-door hardtop) Chrysler Town and Country Chrysler Newport Dodge Monaco Dodge Polara Plymouth Fury
Powertrain
Engine	413 cu in (6.8 L) RB V8 (1965) 440 cu in (7.2 L) RB V8 (1966–68)
Transmission	3-speed TorqueFlite automatic
Dimensions
Wheelbase	124.0 in (3,150 mm)
Length	218.2 in (5,542 mm)[35]

All 1965 model-year Chryslers (as well as full-sized Plymouth and Dodge models) were built on an all-new C-body unibody platform that featured a bolt-on, rubber-isolated front subframe. Elwood Engel designed the 1965 New Yorker (and all Chrysler models) with styling cues from his 1961 Lincoln Continental — slab sides with chrome trim along the top edges of the fenders. The styling began to share some visual similarities with Chrysler Motors' premium luxury sedan, the Imperial, which received an all-new appearance in 1964.^[22]

The standard engine was a 340 hp (254 kW; 345 PS) Firepower 413 cu in (6.8 L) V8, with a single four-barrel carburetion. Optional was the 360 hp (268 kW; 365 PS) 413 from that year's Chrysler letter cars, which came with an unsilenced air cleaner, dual breaker ignition, special camshaft, and dual exhaust. The three-speed TorqueFlite automatic transmission was standard. 1965 was the last year for the 413, replaced in 1966 by the new 440.

The 1965 New Yorker was offered as a four-door sedan, two- and four-door hardtop, and as a Town & Country in two- or three-row station wagon. The four-door sedan was a six-window Town Sedan, also available in the Newport line and Dodge Custom 880 4-door Sedan. A four-door, four-window sedan was produced, but not offered in the New Yorker line. The two-door hardtop was marketed in the United States. While the 300 and Newport two-door hardtops shared a rounded, convertible-styled roof, the New Yorker had a unique roofline resembling the four-door hardtops. A padded vinyl covering on the parallelogram-shaped rear pillar highlighted the more formal and squared-off lines. The wheelbase of the New Yorker models, except the wagon, was 124.0 in (3,150 mm). The Town & Country wagon was on the Dodge's 121 in (3,100 mm) wheelbase as all C-body wagons shared the same basic body. Factory options for 1965 included a vinyl rear roof pillar insert, Saginaw-sourced Tilt 'N Telescopic steering wheel, air conditioning, and power options (windows, antenna, and steering).

The 1965 Chrysler sales increased nearly 40% compared to 1963, to 204,002. Of those 49,871, were New Yorkers, a 62% increase over 1964.^[36]

• 
  1965 Chrysler New Yorker 2-door Hardtop
• 
  1965 Chrysler New Yorker 2-door Hardtop
• 
  1965 Chrysler New Yorker wagon, the final year for a New Yorker station wagon

Styling for the 1966 model year was an evolution of the 1965 themes. Changes included a new grille, tail lamps, and revised side trim. The biggest news was the adoption of the new Firepower 440 V8 engine. In standard form, it produced 350 hp (261 kW; 355 PS); the optional, high-performance 440 TNT 365 hp (272 kW; 370 PS) included a twin snorkel, silenced air cleaner, and dual exhausts. The New Yorker line-up no longer offered a station wagon body style for 1966, as the Town & Country wagon was now marketed as a series on its own. The four-door, six-window Town Sedan and two- and four-door hardtop body styles were continued.

Although 1966 was another good sales year for the Chrysler division overall, with a nearly 29% increase in production and sales of 262,495, New Yorker numbers were down to 47,579.

• 
  1966 Chrysler New Yorker 4-door Hardtop
• 
  1966 Chrysler New Yorker 4-door Hardtop
• 
  1967 Chrysler New Yorker 4-door Sedan

Chrysler completely redesigned sheet metal below the beltline for the 1967 model year. New styling features were wraparound parking lights at the front and taillights at the rear. A new "fasttop" design for the two-door hardtop replaced the more formal look of the 1965 and 1966 designs. The four-door sedan reverted to the four-window style as used on the Newport line.

Sales fell 20%, the company's lowest in five years, due to an economic slump that year.

Styling changes for 1968 included a new grille, bumpers, front sheet metal, rear fenders, and rear deck. Although the Newport and 300 four-door hardtops received a new, sportier roofline shared with Dodge and Plymouth, the New Yorker continued with the roofline introduced in 1965. The main exterior features distinguishing the New Yorker from the other Chrysler lines were a full-width grille with a rectangular pattern, repeated at the rear by the full-width deck trim, and continuous lower bodyside molding.

Chrysler production rebounded with the year setting a record at 264,863 cars built, Of these, 48,143 were New Yorkers, a slight improvement over the 1966 level.^[36]

• 
  1968 Chrysler New Yorker 4-door Sedan
• 
  1968 Chrysler New Yorker 2-door Hardtop
• 
  1968 Chrysler New Yorker 2-door Hardtop

Series EC-H / FC-H / GC-H / HC-H / 3C-H
1970 New Yorker two-door hardtop
Overview
Model years	1969–1973
Assembly	Jefferson Avenue Assembly Detroit, Michigan Belvidere Assembly Plant, Belvidere, Illinois
Body and chassis
Body style	2-door hardtop 4-door sedan 4-door hardtop
Layout	FR layout
Platform	C-body
Related	Imperial Le Baron Imperial Crown Chrysler 300 Chrysler Town and Country Chrysler Newport Dodge Monaco Dodge Polara Plymouth Fury
Powertrain
Engine	440 cu in (7.2 L) RB V8
Transmission	3-speed A-727 automatic
Dimensions
Wheelbase	124.0 in (3,150 mm)[37]
Length	224.7 in (5,707 mm)[38]

The August 1968 introduction of the 1969 model year full-size Chryslers unveiled an all-new "Fuselage Styling" that shared with all C-body cars, including the completely restyled Imperial.^[39] Although the previous generation's platform continued, the "fuselage" styling was a major reworking. It featured plain curved smooth sides with a higher beltline. Distinguishing the full-size cars were details at the front and rear that had rectangular-frame bumpers as well as different taillamps.^[39] However, the high beltline and fenders provided a bulky look because there was no beltline shoulder resulting in a large expanse of rear quarter panel.^[40] This was most evident in the two-door hardtop model where the "greenhouse looked turret-topped."^[40] The two-door hardtop's new look was harking back to the club coupes of the 1940s.^[22]

The 1970 Chryslers received minor styling changes to the grille, taillamps, and trim. The small vent windows on the front doors were dropped on the two-door hardtops.

Due to lower-than-expected sales, the facelift scheduled for 1971 was put off until 1972. Thus, the 1971 models only received new grilles and taillamps. Ventless front-door windows on the four-door sedan and hardtop were new this year. A new "Torsion-Quiet" system was introduced which added rubber cushions and blocks to isolate the suspension.

The 1972 model year engine output ratings dropped to meet stricter emissions standards and rising gas prices. Chryslers received a new 'split grille' similar to the 1971–1974 Dodge Chargers. This would be the last year for the 'loop'-style front bumpers on Chryslers.

The "Fuselage Styling" continued through the 1973 model year. However, the massive loop bumper was replaced with a new squared-off front end featuring a new bumper with rubber-faced guards to withstand the new 5-mph collision standards.^[41] The four-door hardtop was the best-seller for 1973 with 26,635 made, followed by the two-door hardtop with 9,190, and 8,541 four-door sedans.^[41]

• 
  1969 Chrysler New Yorker 2-Door Hardtop
• 
  1970 Chrysler New Yorker 4-Door Sedan
• 
  1971 Chrysler New Yorker 4-Door Hardtop
• 
  1972 Chrysler New Yorker Brougham 4-Door Hardtop
• 
  1973 Chrysler New Yorker 4-door hardtop
• 
  1973 Chrysler New Yorker interior

Series 4C / 5C / CS
1976 Chrysler New Yorker Brougham 4-door hardtop
Overview
Model years	1974–1978
Assembly	Jefferson Avenue Assembly Detroit, Michigan Belvidere Assembly Plant, Belvidere, Illinois
Body and chassis
Body style	2-door coupe 2-door hardtop 4-door sedan 4-door hardtop
Layout	FR layout
Platform	C-body
Related	Imperial Chrysler Town and Country Chrysler Newport Dodge Monaco Plymouth Fury Plymouth Gran Fury
Powertrain
Engine	440 cu in (7.2 L) Wedge V8 400 cu in (6.6 L) Wedge V8 360 cu in (5.9 L) Chrysler LA V8
Dimensions
Wheelbase	124.0 in (3,150 mm)[42]
Length	232.7 in (5,911 mm)
Width	79.5 in (2,019 mm)
Height	54.5 in (1,384 mm)
Curb weight	4,832 lb (2,192 kg)
Chronology
Successor	Chrysler Fifth Avenue[43]

The 1974 models were the last full-size models Chrysler designed from the ground up.^[44] The rounded "Fuselage Styling" gave way to an even more massive slab-sided body on all full-size Chryslers. This generation utilized popular styling motifs, primarily used on the Lincoln Continental. However, they debuted almost simultaneously with the start of the 1973 OPEC oil embargo. They contributed to the automaker's economic woes in the late 1970s.

The 1974 New Yorkers emphasized luxury and comfort with roomy interiors, plush upholstery, additional sound insulation, and more standard amenities. Two New Yorker trim levels were offered in 1974, the base New Yorker and an upgraded New Yorker Brougham. The listed retail price for the four-door hardtop sedan was US$6,611 ($40,844 in 2023 dollars ^[5]) and 13,165 were sold, while the St. Regis appearance option package returned from the mid-1950s and was added mid-year offering fixed formal opera windows, body paint accent stripes and a forward half-covered vinyl covered roof.^[34] The 440 cu in (7.2 L) V8 became the standard engine on the New Yorker replacing the previous 400 cu in (6.6 L) V8. Fuel economy decreased because of the larger engine and the car's heavier weight.

The 1975 model year New Yorkers were largely a carryover. They received a slightly revised grille, and New Yorker Brougham became the sole trim designation. The St. Regis package, introduced in mid-1974, returned for its first full year.

The 1976 New Yorker inherited the front and rear-end styling of the discontinued Imperial, including the covered headlights flanking the vertical waterfall split grille topped with a hood ornament. The rear end included vertical taillamps finishing the peaked rear fenders between a massive rear bumper. The Imperial styling gave the New Yorker an unforeseen boost in sales, as the car looked distinctly different from the lower-priced Newport. In turn, the styling cues formerly used on the 1974 and 1975 New Yorkers were passed on to the Chrysler Newport Custom, which was positioned between the standard Newport and the New Yorker. The 1976 New Yorker also inherited the Imperial's interior styling. The Chrysler New Yorker Brougham, introduced as an optional trim package in 1974, became the standalone top-of-the-line model for 1976. Brougham offered a higher level of luxury appointments compared to the standard New Yorker. Upgrades included premium upholstery in leather or plush fabrics, enhanced woodgrain interior trim, and additional exterior badging. The standard engine, 400 cu in (6.6 L) V8, included "lean-burn" and was rated at 175 hp (130 kW; 177 PS) and 300 lb⋅ft (407 N⋅m) of torque.

In 1977, the standard 440 cu in (7.2 L) V8 engine was revised to include a new computer-controlled "lean burn" system, allowing for more responsive acceleration and performance, but was aimed to improve fuel efficiency. However, the technology could be problematic and require maintenance. The 440 cu in (7.2 L) V8 was available, rated at 195 hp (145 kW; 198 PS) and 320 lb⋅ft (434 N⋅m) of torque. This was needed for the 4,739 lb (2,150 kg) weight of a typical New Yorker.

The 1978 New Yorker Brougham was available in two-door and four-door hardtop body styles. Both were the last U.S.-built true pillarless hardtop models with frameless door glass and fully opening windows.^[45] An optional "St. Regis" package included a partial "formal" padded vinyl roof that had a fixed B-pillar and opera window.^[46] This was also the final year a two-door New Yorker was offered. Appearance changes were limited to a new segmented grill design, dual accent tape strips on the lower body sides, new rear deck stripes, and bright accents on the taillamps.^[47] The 400 cu in (6.6 L) V8 engine (360 cu in (5.9 L) in California and high altitude regions) became the standard engine, with the 440 cu in (7.2 L) optional. The last year of the C-body New Yorker Broughams saw engineering changes, including a revised windshield wiper linkage bushing, redesigned front and rear plastic fender extensions for the bumpers, and thinner glass.

• 
  1974 Chrysler New Yorker Brougham 2-door hardtop with St. Regis option package
• 
  1975 Chrysler New Yorker Brougham 4-door hardtop (with non-standard wheels)
• 
  1977 Chrysler New Yorker Brougham 4-door hardtop

Series TP
1979 Chrysler New Yorker
Overview
Model years	1979–1981
Assembly	Lynch Road Assembly, Detroit, Michigan, United States
Body and chassis
Body style	4-door sedan
Layout	FR layout
Platform	R-body
Chassis	body-on-frame
Related	Chrysler Fifth Avenue Chrysler Newport Dodge St. Regis Plymouth Gran Fury
Powertrain
Engine	318 cu in (5.2 L) Chrysler LA V8 360 cu in (5.9 L) Chrysler LA V8
Dimensions
Wheelbase	118.5 in (3,010 mm)
Length	221.5 in (5,626 mm)
Width	77.1 in (1,958 mm)
Height	54.5 in (1,384 mm)
Curb weight	3,810 lb (1,730 kg)

The 1979 R-body series was a "pillared hardtop." The 318 cu in (5.2 L) V8 was standard, the 360 cu in (5.9 L) optional through 1980. While shorter and much lighter than the previous generation, these cars still had a big car look and ride. Hidden headlamps and full-width taillights distinguished it from its R-body siblings, the Chrysler Newport, Dodge St. Regis and Plymouth Gran Fury. A new "Fifth Avenue" trim package was offered. Sales were robust, with almost 55,000 cars sold with a listed retail price of $8,631 ($36,234 in 2023 dollars ^[5]).^[43]

The exterior colors offered were Dove Gray, Formal Black, Nightwatch Blue, Spinnaker White, metallic Teal Frost, Regent Red Sunfire, Sable Tan Sunfire, Medium Cashmere, Frost Blue and Teal Green Sunfire and were shared with the Newport.^[43] The interior offered a front bench seat with a 60/40 split upholstered in Richton cloth and vinyl with a folding center armrest.^[43] The front suspension continued to offer Chryslers signature longitudinal front torsion bars, called Torsion-Aire, and anti-sway bar with a solid rear limited-slip differential connected to leaf springs.^[43]

To add to its exclusivity, Chrysler offered "Convenience and Appearance Options". The list offered Open Road Handling Package, Two-Tone Paint, interior lighting, air conditioning with an upgraded climate control feature, rear window defroster, cruise control, power adjustable front seat, power windows, power electric door locks, power trunk release, luxury appearance steering wheel with an extra cost leather wrapped feature, digital clock, locking gas cap, lighting and mirrors, halogen headlamps, cornering lamps, electric adjustable outside sideview mirrors, several AM/FM radio or separate stereo radio choices to include CB and 8-track cassette player, power electric extendable antenna, various vinyl side moldings and bumper guards, undercoating, color keyed seat belts, wheel covers, and aluminum wheels, all at extra cost.^[43]

In 1980 the New Yorker gained an upscale "Special Edition" trim package, featuring a brushed stainless steel roof treatment and exclusive mahogany metallic paint, and was more modest to the top level "Fifth Avenue" appearance and equipment option package, while six two-tone color combinations were also added to the options list.^[43] Sales were just over 13,500 cars as the price increased to $10,459 ($38,676 in 2023 dollars ^[5]).^[43] The early 1980s recession in the United States had begun to take effect, and sales of large and expensive cars were particularly impacted.

In 1981 a bold new grille with simple vertical ribs appeared. The "Fifth Avenue" option package remained, and a heavily optioned "Carriage Roof" package was added, available only in Nightwatch Blue or Mahogany Metallic, along with an extensive list of optional equipment. With a suggested retail price increased to US$10,459 ($35,052 in 2023 dollars ^[5]) with an additional Fifth Avenue trim package price of US$1,300 ($4,357 in 2023 dollars ^[5]), sales plummeted again, to just over 6,500 cars.^[43]

Production Figures^[22]

Year	Units
1979	54,640
1980	13,513
1981	6,548
Total Production = 74,701

Series FS
Overview
Model years	1982
Assembly	Windsor Assembly, Windsor, Ontario, Canada
Body and chassis
Body style	4-door sedan
Layout	FR layout
Platform	M-body
Related	Chrysler Fifth Avenue Chrysler LeBaron Dodge Diplomat Plymouth Gran Fury/Caravelle
Powertrain
Engine	225 cu in (3.7 L) RG I6 318 cu in (5.2 L) LA V8
Dimensions
Wheelbase	112.7 in (2,863 mm)
Length	206.7 in (5,250 mm)
Width	74.2 in (1,885 mm)
Height	55.3 in (1,405 mm)

For 1982, the New Yorker underwent further downsizing with the model name being placed on a restyled and upgraded M-body LeBaron. In turn, the LeBaron, an M-body since 1977, was downsized onto the front-wheel drive Chrysler K-body. The smaller New Yorker was now propelled by Chrysler's slant-six engine, with the 318 V8 the only engine option. The 1982 New Yorker was available in base and Fifth Avenue trims. Both used the formal roof treatment.

The Fifth Avenue package gave buyers a choice of pillowed "Corinthian" leather or Kimberley velvet seats while base models had cloth or optional leather seats. The 318 V8 engine came standard with the Fifth Avenue package, along with illuminated entry system, power door locks, power driver's seat, power trunk release, AM/FM stereo, speed control, leather wrapped steering wheel, deluxe intermittent wipers, and wire wheel covers.

This car became the "Chrysler New Yorker Fifth Avenue" for 1983, and for 1984 the "New Yorker" prefix was dropped altogether; becoming the "Chrysler Fifth Avenue".

Production figures^[22]

Year	Units
1982	50,509

Series T / ET / E
1987 Chrysler New Yorker
Overview
Also called	Chrysler New Yorker Turbo
Model years	1983–1988
Assembly	Jefferson Avenue Assembly Detroit, Michigan United States Toluca Assembly Plant, Toluca, Mexico (1986–1989)
Body and chassis
Body style	4-door sedan
Layout	Transverse front-engine, front-wheel drive
Platform	E-body
Related	Chrysler Executive Chrysler E-Class Dodge 600 Plymouth Caravelle
Powertrain
Engine	2.2 L K I4 2.2 L Turbo I I4 2.5 L K I4 2.6 L Mitsubishi G54B I4
Transmission	3-speed A413 automatic 3-speed A470 automatic
Dimensions
Wheelbase	103.3 in (2,624 mm)[48]
Length	187.2 in (4,755 mm)
Width	68.0 in (1,727 mm)
Height	53.1 in (1,349 mm)

In 1983, the New Yorker name was used on two different models. The M-body car was now the "New Yorker Fifth Avenue" a name which changed to simply "Fifth Avenue" from 1984 until 1989. The other was an all-new K-car based New Yorker, which used the front-wheel drive Chrysler E platform, the beginning of the extended K-car years. It was the first Chrysler manufactured vehicle to offer a four-cylinder engine since the 1932 Plymouth Model PA using the Chrysler flathead four cylinder.^[49]

The E-platform New Yorker came with state-of-the-art 1980s technology, including a digital dashboard and Electronic Voice Alert, which spoke notifications such as "A door is ajar"; "Please fasten your seat belts"; "Don't forget your keys"; "Thank you" (after fastening the seat belt, closing the door tightly or removing the key from the ignition switch); "Your engine oil pressure is low - prompt service is required". Also standard was a Landau vinyl roof with electroluminescent opera lamps. This was the only Chrysler New Yorker generation with an inline-four engine. 1983 was a limited production year for the FWD New Yorker. When introduced in 1983, it shared many elements with the Chrysler E-Class and had a waterfall grille that was slightly different from the 1984-1988 versions.

For 1984, restyled wraparound taillights and a revised front grille were among the cosmetic changes. A 2.2 L I4 turbo engine was now an option and new electronic instrumentation featured a digital speedometer and odometer. Pillowed velvet seats replaced deep-nap cloth seats as standard.

In 1985, the standard engine switched from the 2.2 L I4 to a Mitsubishi-sourced 2.6 L I4. New standard interior features included an overhead storage console with reading lamps, rear-seat headrests, and power windows.

In 1986, a Chrysler-built 2.5 L I4 replaced the 2.6 L I4 as the standard engine. Also new was an automatic load-leveling suspension. Cosmetically, rear decklid panels, moldings, and taillights were redesigned. Interior changes included a new forward console and revised electronic instrumentation and an AM/FM stereo and deluxe intermittent wipers were now standard.

In 1987, hood vents were eliminated on the turbo models, as were fender louvers on all models. A new six-speaker Infinity sound system was optional. As with other Chryslers, the steering wheel was redesigned. This was the best-selling and last full model year for the E-platform New Yorker.

Although a new thirteenth generation New Yorker was introduced for 1988, the twelfth generation continued for one more abbreviated model year as the 1988 New Yorker Turbo. The 2.2 L I4 turbo was now the standard and only available engine. In addition to the turbo engine, previously optional yet commonly ordered equipment like automatic temperature control air conditioning, tilt steering wheel, cruise control, rear-window defogger, and power door locks became standard. While previous model year New Yorkers equipped with the optional turbo engine were commonly referred to as a "New Yorker Turbo" and wore "Turbo" badges, only the 1988 model had it as its official model name.

Production figures^[22]

Year	Units
1983	33,832
1984	60,501
1985	60,700
1986	51,099
1987	68,279
1988 (Turbo)	8,805
Total Production = 283,216

Series C
1990 Chrysler New Yorker Landau
Overview
Model years	1988–1993
Assembly	Belvidere Assembly Plant, Belvidere, Illinois
Body and chassis
Body style	4-door sedan
Layout	Transverse front-engine, front-wheel drive
Platform	C-body
Related	Chrysler New Yorker Fifth Avenue Chrysler Imperial Dodge Dynasty
Powertrain
Engine	3.0 L (183.1 cu in) Mitsubishi 6G72 V6 3.3 L (201.4 cu in)EGA V6
Transmission	3-speed A670 automatic 4-speed A604 automatic
Dimensions
Wheelbase	1988–1990: 104.3 in (2,649 mm) 1991–93: 104.5 in (2,654 mm)
Length	193.6 in (4,917 mm)
Width	1988–1990: 68.5 in (1,740 mm) 1991–93: 68.9 in (1,750 mm)
Height	1988–1990: 53.5 in (1,359 mm) 1991–93: 53.6 in (1,361 mm)

The redesigned New Yorker for 1988 was larger (see Chrysler C platform), with many underbody and suspension components carried over and sharing much of its design with the rebadged variant, the Dodge Dynasty. The new version had a V6 engine — a Mitsubishi-sourced 3.0 L unit instead of the Chrysler LA series 3.9 L V6 engine and optional anti-lock brakes. Base and Landau trim choices were offered, the latter of which carried a rear-quarter vinyl top. Hidden headlamps, a feature lost when the R-body cars were discontinued, returned. All thirteenth generation New Yorkers, as well as the reintroduced flagship 1990-1993 Imperial, were covered by Chrysler's market-leading "Crystal Key Owner Care Program" which included a 5-year/50,000-mile limited warranty and 7-year/70,000-mile powertrain warranty. A 24-hour toll-free customer service hotline was also provided.

For 1989, the 3.0 L V6 engine had a slight horsepower increase and was now mated to a new 4-speed Ultradrive automatic transmission. This year also marked the 50th anniversary of the "New Yorker" name. Although no special anniversary edition or recognition was offered at the time, it turned out to be the most popular New Yorker of the model run with over 100,000 units produced that year.

In 1990, a base model New Yorker, marketed as the "Salon" was added. The Salon was a rebadged Dodge Dynasty with exposed headlamps, horizontal taillights, and a grille similar to the Dodge. The Salon was marketed in Canada as the Chrysler Dynasty. All models carried a new Chrysler-built 3.3 L V6 engine that year. Minor changes to the interior included a revised, contoured dash. A driver's side airbag was now standard.

The Landau model was dropped for 1991 but Salon was upgraded and included more standard equipment, hidden headlights, vertical taillights, and a traditional Chrysler grille.

A styling update for 1992 produced a more rounded appearance front and rear. A padded landau roof, similar to one previously featured on the "Landau" model, was now an option on the Salon.

Last year's restyle carried into 1993. The last thirteenth generation New Yorker was manufactured on May 28, 1993.^[43]

In 1990, a stretched-wheelbase variant of the New Yorker was offered, marketed as the New Yorker Fifth Avenue and replacing the just-departed M-body platform. This model was discontinued in 1993.

Production Figures^[22]

Year	Units
1988	70,968
1989	100,461
1990	86,004
1991	55,229
1992	51,650
1993	52,128
Total Production = 416,440

Series H
1995 Chrysler New Yorker
Overview
Also called	Chrysler LHS
Model years	1994–1996 (New Yorker) 1994–1997 (LHS)
Assembly	Brampton Assembly, Brampton, Ontario, Canada
Body and chassis
Body style	4-door sedan
Layout	Longitudinal front-engine, front-wheel drive
Platform	Chrysler LH platform
Related	Chrysler Concorde Chrysler LHS Dodge Intrepid Eagle Vision
Powertrain
Engine	3.5 L EGE V6
Transmission	4-speed 42LE automatic
Dimensions
Wheelbase	113.0 in (2,870 mm)
Length	207.4 in (5,268 mm)
Width	74.4 in (1,890 mm)
Height	1994: 55.7 in (1,415 mm) 1995–96: 55.9 in (1,420 mm)
Curb weight	3,483–3,587 lb (1,580–1,627 kg)

The final generation of the New Yorker continued with front-wheel drive on an elongated version of the new Chrysler LH platform and was shown at the 1992 North American International Auto Show in Detroit. It was released in May 1993 along with the nearly identical Chrysler LHS as an early 1994 model, six months after the original LH cars: the Chrysler Concorde, Dodge Intrepid, and Eagle Vision, were introduced. The New Yorker came standard with the 3.5 L EGE which produced 214 hp (160 kW). Chrysler gave the New Yorker a more "traditional American" luxury image, and the LHS a more European performance image (as was done with the Eagle Vision). Little separated New Yorker from LHS in appearance, with New Yorker's chrome hood trim, body-color cladding, standard chrome wheel covers, and 15-inch wheels, column shifter and front bench seat, being the only noticeable differences. An option provided for 16-inch wheels and a firmer suspension type ("touring suspension"). This option eliminated the technical differences between the New Yorker and LHS. LHS came with almost all of New Yorker's optional features as standard equipment and featured the firmer tuned suspension, to go with its more European image. This model was also officially sold by Chrysler in Europe.

During the 1994 model run, various changes were made to the New Yorker. On the outside, New Yorker was switched to new accent-color body cladding, whereas LHS received body-color cladding. This change aligned New Yorker with the Chrysler Concorde which also had accent-color cladding. The 16-inch wheels became standard. Likewise, the touring suspension option available on early 1994 New Yorker models was discontinued, leaving only "ride-tuned" suspension. This resulted in a permanent technical difference with LHS.

For 1995, the New Yorker received Chrysler's revived blue ribbon logo (which was last used in the 1950s) on its grille, which replaced the Pentastar that had been used on models beginning in 1980.

The 1996 model featured additional sound insulation and revised structural engineering to give it a quieter ride. A new built-in transmitter replaced the remote garage door opener. The antenna was now integrated into the rear window. Due to similarities between the New Yorker and LHS, and the LHS's strong sales, the New Yorker name was dropped after a short 1996 production run. Despite being far more contemporary and monochromatic in design compared to previous models, the traditional New Yorker with its two-tone cladding and chrome trim still did not follow the modern, monochromatic styling trend of the division's other vehicles in 1996.

• 
  1994–1996 Chrysler New Yorker
• 
  Chrysler New Yorker (Europe)
• 
  Rear view

The fourteenth, and final, generation New Yorker's design can be traced to 1986, when designer Kevin Verduyn completed the initial exterior design of a new aerodynamic concept sedan called Navajo. The design never passed the clay model stage.

It was also at this time that the Chrysler Corporation purchased bankrupt Italian sports car manufacturer Lamborghini. The Navajo's exterior design was reworked and became the Lamborghini Portofino, released as a concept at the 1987 Frankfurt Auto Show. The Portofino was heralded as a design triumph, setting in motion Chrysler's decision to produce a production sedan with the Portofino's revolutionary exterior design, called "cab-forward". The cab forward design was characterized by the long, low slung windshield, and relatively short overhangs. The wheels were effectively pushed to the corners of the car, creating a much larger passenger cabin than the contemporaries of the time.

Design of the chassis began in the late 1980s, after Chrysler had bought another automaker: American Motors Corporation (AMC) in 1987. During this time, Chrysler began designing the replacement for the Dodge Dynasty and Chrysler Fifth Avenue as well as a potential Plymouth. The initial design of Dodge's LH bore resemblance to the Dynasty, and this design was scrapped entirely after François Castaing, formerly AMC's Vice President of product engineering and development, became Chrysler's Vice President of vehicle engineering in 1988. The new design, under Castaing's leadership, began with the Eagle Premier, also sold later as the Dodge Monaco. The Premier's longitudinal engine mounting layout was inherited, as was the front suspension geometry, and parts of the braking system. The chassis itself became a flexible architecture capable of supporting front or rear-wheel drive (designated "LH" and "LX" respectively). The chassis design was continually refined throughout the following years, as it underpinned more Chrysler prototypes: the 1989 Chrysler Millennium and 1990 Eagle Optima.

The transmission was inspired by the Eagle Premier's ZF automatic. However, it borrowed heavily from Chrysler's A604 (41TE) "Ultradrive" transversely mounted automatic, it became the A606 (also known as 42LE). This Ultradrive transmission however was not without critics as The New York Times reported on January 25, 1991, that Consumers Union would publish in the February 1991 issue of the magazine Consumer Reports a warning for consumers to not purchase a vehicle with this "Ultradrive" transmission citing poor reliability and safety hazards. By 1990, it was decided that the new technologically advanced car would need a new technologically advanced engine to power it. Until that time, the only engine confirmed for use was Chrysler's 3.3 L pushrod V6, which would be used in the three original LH cars, the Intrepid, Vision, and Concorde, in base form. The 3.3 L engine's 60° block was bored out to 3.5 L, while the pushrod-actuated valves were replaced with SOHC cylinder heads with four valves per cylinder, creating an advanced 3.5 L V6 optional in the three smaller cars, but standard in LHS and New Yorker.

The general LH appearance, still based on the cab forward exterior design of the 1987 Lamborghini Portofino concept, with its aerodynamic shape, made for little wind noise inside this large car. This sleek styling gives the LH cars a low drag coefficient which was ahead of its time. The New Yorker featured a more monochromatic design inside and out (but less so than its LHS sibling, which had very little chrome trim), and aluminum wheels with a Spiralcast design. The single color motif was more pronounced on models without the grey lower cladding.

Upscale New Yorker models feature leather-trimmed seats, steering wheel, shift knob, and door inserts. Passenger comforts include rear center rear armrest, and 8-way power seats for both the driver and passenger, as well as personal reading lamps. Power windows and central door locks were standard, as was climate control with air conditioning, and cruise control. remote keyless entry available as an option, as was a remote activated alarm, an overhead console with a computer, power moonroof, and alloy wheels. The best stock audio options found in New Yorker are the Infinity sound systems having eight speakers positioned throughout the cabin along with an equalizer. Head units include a radio with either cassette or CD playback, and up to a five-band adjustable graphic equalizer, with joystick balance and fade control. Standard safety features included dual front airbags, anti-lock brakes (ABS), and traction control.

Dual-way power sunroofs were available on this car. They were designed and installed by American Sunroof Corp. (now ASC Global) from its Columbus, Ohio plant, not by Mopar itself. An installed sunroof eliminated most of the front overhead console that featured storage bins for a garage door opener and sunglasses. However, the Overhead Travel Information System (OTIS), or onboard computer with integrated map lights, was retained.

The five-passenger Chrysler LHS was differentiated from its New Yorker counterpart by a floor console and shifter, five-passenger seating, lack of chrome trim, an upgraded interior, and a sportier image. After a short 1996 production run the New Yorker was dropped in favor of a six-passenger option on the 1996-1997 LHS. The LHS received a minor face change in 1995 when the corporate-wide Pentastar emblem was replaced with the revived Chrysler brand emblem.

New Yorker Production

Production Figures^[22]

Year	Units
1994	34,283
1995	23,624
1996	3,295
Total Production = 61,202

• Lee, John (1990). Standard Catalog of Chrysler, 1924-1990. Iola, WI: Krause Publications. ISBN 0-87341-142-0.

• 1974-1978 Chrysler C-bodies^{[permanent dead link‍]}
• Chrysler New Yorker Online
• Chrysler New Yorker page at Everything.com
• 1969 - 1973 Chrysler Full Size Cars
• Chrysler New Yorker brief history (1983-1988)