[go: up one dir, main page]

Jump to content

Physical quantity

From Wikipedia, the free encyclopedia
(Redirected from Quantity (science))
Ampèremetre (Ammeter)

A physical quantity (or simply quantity)[1][a] is a property of a material or system that can be quantified by measurement. A physical quantity can be expressed as a value, which is the algebraic multiplication of a numerical value and a unit of measurement. For example, the physical quantity mass, symbol m, can be quantified as m=n kg, where n is the numerical value and kg is the unit symbol (for kilogram). Quantities that are vectors have, besides numerical value and unit, direction or orientation in space.

Components

[edit]

Following ISO 80000-1,[1] any value or magnitude of a physical quantity is expressed as a comparison to a unit of that quantity. The value of a physical quantity Z is expressed as the product of a numerical value {Z} (a pure number) and a unit [Z]:

For example, let be "2 metres"; then, is the numerical value and is the unit. Conversely, the numerical value expressed in an arbitrary unit can be obtained as:

The multiplication sign is usually left out, just as it is left out between variables in the scientific notation of formulas. The convention used to express quantities is referred to as quantity calculus. In formulas, the unit [Z] can be treated as if it were a specific magnitude of a kind of physical dimension: see Dimensional analysis for more on this treatment.

Symbols and nomenclature

[edit]

International recommendations for the use of symbols for quantities are set out in ISO/IEC 80000, the IUPAP red book and the IUPAC green book. For example, the recommended symbol for the physical quantity "mass" is m, and the recommended symbol for the quantity "electric charge" is Q.

Typography

[edit]

Physical quantities are normally typeset in italics. Purely numerical quantities, even those denoted by letters, are usually printed in roman (upright) type, though sometimes in italics. Symbols for elementary functions (circular trigonometric, hyperbolic, logarithmic etc.), changes in a quantity like Δ in Δy or operators like d in dx, are also recommended to be printed in roman type.

Examples:

  • Real numbers, such as 1 or 2,
  • e, the base of natural logarithms,
  • i, the imaginary unit,
  • π for the ratio of a circle's circumference to its diameter, 3.14159265...
  • δx, Δy, dz, representing differences (finite or otherwise) in the quantities x, y and z
  • sin α, sinh γ, log x

Support

[edit]

Scalars

[edit]

A scalar is a physical quantity that has magnitude but no direction. Symbols for physical quantities are usually chosen to be a single letter of the Latin or Greek alphabet, and are printed in italic type.

Vectors

[edit]

Vectors are physical quantities that possess both magnitude and direction and whose operations obey the axioms of a vector space. Symbols for physical quantities that are vectors are in bold type, underlined or with an arrow above. For example, if u is the speed of a particle, then the straightforward notations for its velocity are u, u, or .

Tensors

[edit]

Scalar and vector quantities are the simplest tensor quantities, which are tensors can be used to describe more general physical properties. For example, the Cauchy stress tensor possesses magnitude, direction, and orientation qualities.

Dimensions, units, and kind

[edit]

Dimensions

[edit]

The notion of dimension of a physical quantity was introduced by Joseph Fourier in 1822.[2] By convention, physical quantities are organized in a dimensional system built upon base quantities, each of which is regarded as having its own dimension.

Unit

[edit]

There is often a choice of unit, though SI units are usually used in scientific contexts due to their ease of use, international familiarity and prescription. For example, a quantity of mass might be represented by the symbol m, and could be expressed in the units kilograms (kg), pounds (lb), or daltons (Da).

Kind

[edit]

Dimensional homogeneity is not necessarily sufficient for quantities to be comparable;[1] for example, both kinematic viscosity and thermal diffusivity have dimension of square length per time (in units of m2/s). Quantities of the same kind share extra commonalities beyond their dimension and units allowing their comparison; for example, not all dimensionless quantities are of the same kind.[1]

Base and derived quantities

[edit]

Base quantities

[edit]

A systems of quantities relates physical quantities, and due to this dependence, a limited number of quantities can serve as a basis in terms of which the dimensions of all the remaining quantities of the system can be defined. A set of mutually independent quantities may be chosen by convention to act as such a set, and are called base quantities. The seven base quantities of the International System of Quantities (ISQ) and their corresponding SI units and dimensions are listed in the following table.[3]: 136  Other conventions may have a different number of base units (e.g. the CGS and MKS systems of units).

International System of Quantities base quantities
Quantity SI unit Dimension
symbol
Name(s) (Common) symbol(s) Name Symbol
Length l, x, r metre m L
Time t second s T
Mass m kilogram kg M
Thermodynamic temperature T kelvin K Θ
Amount of substance n mole mol N
Electric current i, I ampere A I
Luminous intensity Iv candela cd J

The angular quantities, plane angle and solid angle, are defined as derived dimensionless quantities in the SI. For some relations, their units radian and steradian can be written explicitly to emphasize the fact that the quantity involves plane or solid angles.[3]: 137 

General derived quantities

[edit]

Derived quantities are those whose definitions are based on other physical quantities (base quantities).

Space

[edit]

Important applied base units for space and time are below. Area and volume are thus, of course, derived from the length, but included for completeness as they occur frequently in many derived quantities, in particular densities.

Quantity SI unit Dimensions
Description Symbols
(Spatial) position (vector) r, R, a, d m L
Angular position, angle of rotation (can be treated as vector or scalar) θ, θ rad None
Area, cross-section A, S, Ω m2 L2
Vector area (Magnitude of surface area, directed normal to tangential plane of surface) m2 L2
Volume τ, V m3 L3

Densities, flows, gradients, and moments

[edit]

Important and convenient derived quantities such as densities, fluxes, flows, currents are associated with many quantities. Sometimes different terms such as current density and flux density, rate, frequency and current, are used interchangeably in the same context; sometimes they are used uniquely.

To clarify these effective template-derived quantities, we use q to stand for any quantity within some scope of context (not necessarily base quantities) and present in the table below some of the most commonly used symbols where applicable, their definitions, usage, SI units and SI dimensions – where [q] denotes the dimension of q.

For time derivatives, specific, molar, and flux densities of quantities, there is no one symbol; nomenclature depends on the subject, though time derivatives can be generally written using overdot notation. For generality we use qm, qn, and F respectively. No symbol is necessarily required for the gradient of a scalar field, since only the nabla/del operator ∇ or grad needs to be written. For spatial density, current, current density and flux, the notations are common from one context to another, differing only by a change in subscripts.

For current density, is a unit vector in the direction of flow, i.e. tangent to a flowline. Notice the dot product with the unit normal for a surface, since the amount of current passing through the surface is reduced when the current is not normal to the area. Only the current passing perpendicular to the surface contributes to the current passing through the surface, no current passes in the (tangential) plane of the surface.

The calculus notations below can be used synonymously.

If X is a n-variable function , then

Differential The differential n-space volume element is ,

Integral: The multiple integral of X over the n-space volume is .
Quantity Typical symbols Definition Meaning, usage Dimensions
Quantity q q Amount of a property [q]
Rate of change of quantity, time derivative Rate of change of property with respect to time [q]T−1
Quantity spatial density ρ = volume density (n = 3), σ = surface density (n = 2), λ = linear density (n = 1)

No common symbol for n-space density, here ρn is used.

Amount of property per unit n-space

(length, area, volume or higher dimensions)

[q]Ln
Specific quantity qm Amount of property per unit mass [q]M−1
Molar quantity qn Amount of property per mole of substance [q]N−1
Quantity gradient (if q is a scalar field). Rate of change of property with respect to position [q]L−1
Spectral quantity (for EM waves) qv, qν, qλ Two definitions are used, for frequency and wavelength:


Amount of property per unit wavelength or frequency. [q]L−1 (qλ)

[q]T (qν)

Flux, flow (synonymous) ΦF, F Two definitions are used:

Transport mechanics, nuclear physics/particle physics:

Vector field:

Flow of a property though a cross-section/surface boundary. [q]T−1L−2, [F]L2
Flux density F Flow of a property though a cross-section/surface boundary per unit cross-section/surface area [F]
Current i, I Rate of flow of property through a cross-section/surface boundary [q]T−1
Current density (sometimes called flux density in transport mechanics) j, J Rate of flow of property per unit cross-section/surface area [q]T−1L−2
Moment of quantity m, M

k-vector q:

  • scalar q:
  • 3D vector q, equivalently[b]
Quantity at position r has a moment about a point or axes, often relates to tendency of rotation or potential energy. [q]L

See also

[edit]

Notes

[edit]
  1. ^ "The concept 'quantity' may be generically divided into, e.g. 'physical quantity', 'chemical quantity', and 'biological quantity', or 'base quantity' and 'derived quantity'."[1]
  2. ^ via Hodge duality

References

[edit]
  1. ^ a b c d e "ISO 80000-1:2009(en) Quantities and units — Part 1: General". International Organization for Standardization. Retrieved 2023-05-12.
  2. ^ Fourier, Joseph. Théorie analytique de la chaleur, Firmin Didot, Paris, 1822. (In this book, Fourier introduces the concept of physical dimensions for the physical quantities.)
  3. ^ a b International Bureau of Weights and Measures (20 May 2019), The International System of Units (SI) (PDF) (9th ed.), ISBN 978-92-822-2272-0, archived from the original on 18 October 2021

Further reading

[edit]
  • Cook, Alan H. The observational foundations of physics, Cambridge, 1994. ISBN 0-521-45597-9
  • Essential Principles of Physics, P.M. Whelan, M.J. Hodgson, 2nd Edition, 1978, John Murray, ISBN 0-7195-3382-1
  • Encyclopedia of Physics, R.G. Lerner, G.L. Trigg, 2nd Edition, VHC Publishers, Hans Warlimont, Springer, 2005, pp 12–13
  • Physics for Scientists and Engineers: With Modern Physics (6th Edition), P.A. Tipler, G. Mosca, W.H. Freeman and Co, 2008, 9-781429-202657
[edit]
Computer implementations