[go: up one dir, main page]
Jump to content

Divertor

From Wikipedia, the free encyclopedia
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Interior of Alcator C-Mod showing the lower divertor channel at the bottom of the torus
Divertor design for K-DEMO, a planned future tokamak experiment
Divertor of COMPASS

In magnetic confinement fusion, a divertor is a magnetic field configuration which diverts the heat and particles escaped from the magnetically confined plasma to dedicated plasma-facing components, thus spatially separating the region plasma-surface interactions from the confined core (in contrast to the limited configuration). This requires establishing a separatrix-bounded magnetic configuration, typically achieved by creating poloidal field nulls (X-points) using external coils.

The divertor is a critical part of magnetic confinement fusion devices, first introduced by Lyman Spitzer in the 1950s for the stellarator concept. [1][2] It extracts heat and ash produced by the fusion reaction while protecting the main chamber from thermal loads, and reduces the level of plasma contamination due to sputtered impurities. In tokamaks, high confinement modes are more readily achieved in diverted configurations.

At present, it is expected that future fusion power plants will generate divertor heat loads greatly exceeding the engineering limits of the plasma-facing components. The search for mitigation strategies to the divertor power exhaust challenge is a major topic in nuclear fusion research.

Tokamak divertors

A tokamak featuring a divertor is known as a divertor tokamak or divertor configuration tokamak. In this configuration, the particles escape through a magnetic "gap" (separatrix), which allows the energy absorbing part of the divertor to be placed outside the plasma. The divertor configuration also makes it easier to obtain a more stable H-mode of operation. The plasma facing material in the divertor faces significantly different stresses compared to the majority of the first wall.

Stellarator divertors

In stellarators, low-order magnetic islands can be used to form a divertor volume, the island divertor, for managing power and particle exhaust.[3] The island divertor has shown success in accessing and stabilizing detached scenarios and has demonstrated reliable heat flux and detachment control with hydrogen gas injection, and impurity seeding in the W7-X stellarator.[4][5] The magnetic island chain in the plasma edge can control plasma fueling.[6] Despite some challenges, the island divertor concept has demonstrated great potential for managing power and particle exhaust in fusion reactors, and further research could lead to more efficient and reliable operation in the future.[7]

The helical divertor, as employed in the Large Helical Device (LHD), utilizes large helical coils to create a diverting field. This design permits adjustment of the stochastic layer size, situated between the confined plasma volume and the field lines ending on the divertor plate. However, the compatibility of the Helical Divertor with stellarators optimized for neoclassical transport remains uncertain.[8]

The non-resonant divertor provides an alternative design for optimized stellarators with significant bootstrap currents. This approach leverages sharp "ridges" on the plasma boundary to channel flux. The bootstrap currents modify the shape, not the location, of these ridges, providing an effective channeling mechanism. This design, although promising, has not been experimentally tested yet.[9]

Given the complexity of the design of stellarator divertors, compared to their two-dimensional tokamak counterparts, a thorough understanding of their performance is crucial in stellarator optimization. The experiments with divertors in the W7-X and LHD have shown promising results and provide valuable insights for future improvements in shape and performance. Furthermore, the advent of non-resonant divertors offers an exciting path forward for quasi-symmetric stellarators and other configurations not optimized for minimizing plasma currents.[10]

See also

References

  1. ^ Spitzer, Lyman (1958). "The Stellarator Concept". The Physics of Fluids. 1 (4): 253–264. Bibcode:1958PhFl....1..253S. doi:10.1063/1.1705883. Retrieved 2024-10-23.
  2. ^ Burnett, C. R.; Grove, D. J.; Palladino, R. W.; Stix, T. H.; Wakefield, K. E. (1958). "The Divertor, a Device for Reducing the Impurity Level in a Stellarator". The Physics of Fluids. 1 (5): 438–445. Bibcode:1958PhFl....1..438B. doi:10.1063/1.1724361. Retrieved 2024-10-23.
  3. ^ Feng, Y; et al. (2006). "Physics of island divertors as highlighted by the example of W7-AS". Nucl. Fusion. 46 (8): 807–819. Bibcode:2006NucFu..46..807F. doi:10.1088/0029-5515/46/8/006. hdl:11858/00-001M-0000-0027-0DC4-8. S2CID 62893155.
  4. ^ Schmitz, O; et al. (2021). "Stable heat and particle flux detachment with efficient particle exhaust in the island divertor of Wendelstein 7-X". Nucl. Fusion. 61 (1): 016026. Bibcode:2021NucFu..61a6026S. doi:10.1088/1741-4326/abb51e. hdl:21.11116/0000-0007-A4DC-8. OSTI 1814444. S2CID 225288529.
  5. ^ Effenberg, F; et al. (2019). "First demonstration of radiative power exhaust with impurity seeding in the island divertor at Wendelstein 7-X" (PDF). Nucl. Fusion. 59 (10): 106020. Bibcode:2019NucFu..59j6020E. doi:10.1088/1741-4326/ab32c4. S2CID 199132000.
  6. ^ Stephey, L; et al. (2018). "Impact of magnetic islands in the plasma edge on particle fueling and exhaust in the HSX and W7-X stellarators". Physics of Plasmas. 25 (6): 062501. Bibcode:2018PhPl...25f2501S. doi:10.1063/1.5026324. hdl:21.11116/0000-0001-6AE2-9. S2CID 125652747.
  7. ^ Jakubowksi, M; et al. (2021). "Overview of the results from divertor experiments with attached and detached plasmas at Wendelstein 7-X and their implications for steady-state operation". Nucl. Fusion. 61 (10): 106003. Bibcode:2021NucFu..61j6003J. doi:10.1088/1741-4326/ac1b68. S2CID 237408135.
  8. ^ Morisaki, T; et al. (2013). "Initial experiments towards edge plasma control with a closed helical divertor in LHD". Nucl. Fusion. 53 (6): 063014. Bibcode:2013NucFu..53f3014M. doi:10.1088/0029-5515/53/6/063014. S2CID 122537627.
  9. ^ Boozer, A.H. (2015). "Stellarator design". Journal of Plasma Physics. 81 (6): 515810606. Bibcode:2015JPlPh..81f5106B. doi:10.1017/S0022377815001373.
  10. ^ Bader, Aaron (December 6, 2018). "Progress in Divertor and Edge Transport Research for Stellarator Plasmas" (PDF). Archived from the original (PDF) on 2023-07-26.

Further reading


Stub icon

This plasma physics–related article is a stub. You can help Wikipedia by expanding it.

Retrieved from "https://en.wikipedia.org/w/index.php?title=Divertor&oldid=1253082094"